Question about Dual XDVDN9131 Navigation system with DVD player,LCD monitor

1 Answer

Monitor doesnt want to open - Dual XDVDN9131 Navigation system with DVD player,LCD monitor

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dual Master
  • 12,223 Answers

SEE THIS CAUSES AND FIX IT. God bless you
Service a DVD player disc tray:

  1. Open the housing by removing mounting screws and anything blocking the tray. Press the open/close control to the extend tray, then unplug the unit. To remove a clip-on tray front, brace the tray and slide the panel to one side.
  2. Unplug cables between the front panel and the interior. Remove any screws securing the front panel and remove the panel. If it won't move, check beneath it for clips or additional screws.
  3. Remove the hold-down on top of the disc tray and gently pull the tray out of the player. Clean the travel rail and guides with a swab dampened with denatured alcohol. Lubricate lightly with white lithium grease.
  4. Remove the drive belt (using gloves or tweezers) to inspect for dirt, water, or damage. Clean with a lint-free cloth moistened with denatured alcohol. If the belt is damaged, replace it.

Posted on Oct 01, 2012

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My cpu opens but the monitor doesnt starts


Hi Chiver, there could be possible several reasons, such as RAM into CPU or VGA means Graphic Card issue and consequently there is one more possibility with Monitor. Sometimes due to moisture monitor does not show display and in this case you need to keep monitor in the sunshine for hour almost and then it will work perfect.

Good Luck

Feb 03, 2013 | Intel CELERON 2.66Ghz CPU AND MOTHER BOARD...

1 Answer

Hello my flatron l206wtq-bf doesnt work the light of power flash blue and the monitor doesnt open do you have a solution for me thanks


Hello,

Your unit has a power supply that has failed. When the power board starts failing you may get a wavy display, it may be slow to show a picture or you may just get the flashing power button light that you have. The problems are caused by parts called capacitors that have bulged and failed. Here is a link to a repair guide for the LG L226 that uses the same power supply board as your unit.

http://www.ccl-la.com/blog/index.php/lg-l226wtq-bf-monitor-repair/

The dis-assembly information is almost the same to.

I hope this helps, if so please rate my solution.

BuddyMc

Aug 01, 2011 | LG FLATRON L206WTQ-BF Monitor

2 Answers

Monitor doesnt turn on


From your description, it sounds like the internal 5 Amp cartridge fuse is open. Will need to open the housing and inspect the fuse for failure. If located and failed, replace it and energize the monitor.

If the fuse fails immediately, you have a High Voltage power supply short and the monitor is scrap. It will cost more to replace the power supply/transformer than the monitor is worth.

Hope this provides some useful information.
-Jim

Oct 17, 2009 | ViewSonic OptiQuest Monitor

1 Answer

It doesnt start


Is the battery charged? Is the power cord plugged in? Is there a 'RESET' button underneath the unit?
these are things to check. Is there a little push button that the monitor closes down onto? if so repeatedly press that button, to see if the monitor comes on.

May 10, 2009 | Acer Aspire One AOA150-1570 Notebook PC

1 Answer

My FN+F6 doesnt keep my screen on the laptop open


Change the settings from the display settings panel. (Right click on the desktop and go to display settings)
You should see 2 monitors graphically represented there. 
You can make the monitor that is greyed out active by right clicking on the monitor, and selecting active.


d775564.gif

Dec 11, 2008 | Acer TravelMate 2451WLMi Notebook

1 Answer

Monitor says no signal


this could be a multitude of things. Firstly, check the connections from your computer to your monitor, unplug them and plug them back in, make sure the thumb screws that connect your monitor to your computer and nice and tight but dont use a tool to tighten them, hand tight is good enough.
If that doesnt work, then check that your graphics car hasnt been unseated from its slot, TURN OFF THE POWER to your pc, open the case and look at the graphics card inside. Push it straight back against the slot and that might help.Try connecting the monitor to another computer, although I dont think its a monitor problem. or borrow a monitor from another computer and try it. If that doesnt help then you can try a different graphics card, if you dont have one they are readily available from most major electorincs stores, or even most supermarkets with an electronics dept. Now if you do all this and it doesnt fix it then you will need to find a tech to have a look at it, Like I said at the beggining it could be a multitude of sins, a hardware error stopping the computer from booting and that requires a little technical knowledge

Aug 12, 2008 | Northgate (STAX2517C2) PC Desktop

1 Answer

My FN+F6 doesnt keep my screen on the laptop open


Hi,
I think you're trying to output the screen to external monitor right ? So when you press Fn+F6 this will output to external monitor only but if you do it again it will output to both (External and you LCD) and if you repeat the step again you're back to normal.
goodluck,takecare.

May 24, 2008 | Acer Aspire 3610 Notebook

1 Answer

Monitor says it doesnt reconize my computer and has locked me out


when you open your pc now,do you still hear a click sounds like you hear before ,when your computer has no problem yet? now there is no sounds .do the ff..
1.try to press the numlock key and observe it ,if the indicator LED lite on and off,the problem of your computer is your video card,
2.if you can't hear anything, when you open your unit and the indicator of your monitor goes the color orange,pls..check your memory .clean the memory and the memory slots using the contact cleaner .before you replace a new memory.
3. and try to use a another monitor,maybe your monitor has the problem

Apr 01, 2008 | Gateway FPD1975 19" LCD Monitor

Not finding what you are looking for?
Dual XDVDN9131 Navigation system with DVD player,LCD monitor Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dual Televison & Video Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Joaquim Martins

Level 3 Expert

1127 Answers

Are you a Dual Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...