Question about Uniden DECT 6.0 Cordless Telephone Expansion Handset

Open Question

My UNIDEN Phones don't work.

I recently bought a UNIDEN DECT1588-5 to replace my UNIDEN DCT648-3HS. Now, both phones don't work. I see a message Check TEL Line. I checked all lines and they all seem to work. I can even send this EMail thru my Broadband using the same telephone Lines. I tried to register the phone - I get REGISTERED FAILED message. Should I return this phone and get an AT&T phone instead???

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Uniden Cordless handset

we purchased the uninden 3 pack bundle they worked fine when installed now one handset will light up but the screen comes up blank and the handset won't work also if this can be corrected i would like to know how to purchase one extra hand set and charger

Posted on Oct 03, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: how to register phones to base unit - uniden dct648

Unplug the unit again and press the intercom/find handset button while you re-connect the adaptor.  Then dock the phone unit once again and it will re-register.

Posted on Jan 05, 2009

ghassun

ghassun

  • 499 Answers

SOURCE: uniden phone saying

check the line wire if it connected well otherwise try to reset ur phone by removing the battery for 5 min. and install it back again and turn it on

Posted on Jul 24, 2009

jasomiller

  • 1 Answer

SOURCE: I just bought another handset

I had the same problem with the same equipment and I found this on the web. It worked well for me.
* Remove the base unit's phone from its cradle.
* Unplug the power from the base unit.
* press and hold the FIND button on the base unit, then, while continuing to hold down the FIND button, plug in power again. The CHARGE light should then be flashing. You can release the FIND button.
* press and hold the # (pound) key on the accessory phone you are attempting to register to the base unit and hold this phone OVER and NEAR the cradle/charging prongs until the phone goes through the registration process. (again, don't set the accessory phone in the unit, but just hold it near the unit).

Good luck!

Posted on Oct 16, 2010

Richard Elders

  • 25 Answers

SOURCE: My phone screen says check

First be sure you have dial tone at the jack. Use a corded phone to do this with. If you do have dial tone then be sure you have ac at the outlet that the transformer is plugged in to. If there is no dial tone at the jack...go to your interface box outside and check for dial tone there....if none call the phone company. If you do have dial tone then you need to check your wires to the jack...or have the phone company do it for you. If you don't have ac at the outlet....check your breaker box or have an electrician check for you.

Posted on Nov 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I don't know how to delete message on a uniden dect 6.0 digital answering system


Since you declined to specify the model of your Uniden DECT 6.0 answering machine, I can only suggest you select it from the list beginning here to download a copy of the manual.

Feb 15, 2012 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

I have a uniden 6.0 handset phone d1660-2 and i don't know how to get my messages and then delete them


Select the model of your Uniden DECT 6.0 system from the list beginning here to download the manual.

Feb 03, 2012 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

UNIDEN DECT 6.0 don't have manual need to


Select the model of your Uniden DECT 6.0 phone from the list beginning at
http://www.uniden.com/owners-manuals/dect-phones/scat/dectphones_mnl/
to get the manual.

Sep 01, 2011 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

I have lost my manual and I don't know how to retrieve my messages from another phone when I'm away from home.


Which model of Uniden phone do you have? Do you remember the PIN that you have programmed into the phone? (If the PIN is not set, you can't access the answering system remotely. The Uniden phones that I know don't have a default PIN.)

For the DCT648, to access the messages remotely, dial your phone number and wait for the system to answer. Press 0 followed by your 2 digit PIN (within 2 seconds of pressing zero) while the greeting is playing. To play back all of the messages, press 0 2. If the unit is off, then you need to press 0 followed by your PIN (within 2 seconds) after 10 rings and the beep. Press 0 6 to turn on the unit.

Other Uniden phones use a 4 digit PIN. On the DECT1080, when the greeting plays, press * followed by the PIN. Then press 01 to play back the messages.

Uniden phone manuals are available at the product page (start at http://www.uniden.com and search for your phone) or from the Support page ( http://www.uniden.com/scat/cordlessphones_mnl ) . On the support page, you will need to use the drop down menu to change the type of phone (if you have a DECT phone) and then search through the pages. The manuals are listed in numerical and alphabetical order. One manual will cover several phones if the phone supports multiple handsets. So ignore the number after the dash if you can't find your exact manual.

If you add a comment with your phone's model number, I'll be glad to check the specifics for accessing the answering system for you.

I hope this helps.

Cindy Wells

Aug 16, 2011 | Uniden Cordless Phone

1 Answer

My sister gave me an answering system I don't know how to record my message. Please tell me what to do


Select the model of your Uniden DECT 6.0 system from the list beginning at
http://www.uniden.com/owners-manuals/dect-phones/scat/dectphones_mnl/
to get the manual.

Jul 06, 2011 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

I bought a cordless uniden phone DCX 640 on craigslist. it came with an extra handset. My problem is that there is no owner's manual so I don't know how to use the many buttons on the phone base. ...


Your phone's owner manual can be downloaded from this location.
Hope you are able to sort your problems out soon.
Anyway, please, let me know if I can help you out any further.
Regards, Carlos

Jun 20, 2011 | Uniden Cordless Phone exai398i

2 Answers

Static interference on Uniden 5.8Ghz phone


i have a uniden 5.8 ghz cordeless and thought it was a piece of junk as well. I had static or lapse of audio near the router, the kitchen sink, the microwave (even when off) and in the doorway. I switched the frequency on the router and changed the channels on the phones all with no luck. Short of steering clear of my entire downstairs nothing worked.

Just about ready to buy a new phone and hit up google. Saw a posting that said to keep the base away from even the tv. . .hmmm this is exactly where mine was located. So I swapped the digital answering machine base and moved it downstairs and put the additional base near my flat screen. Guess what? Problem SOLVED! I still cannot believe it.

Hope this helps

Apr 13, 2009 | Uniden 5.8GHz Dual Cordless Phone

1 Answer

Adding additional uniden phones


Hi,
Register them to the base,
Your manual should show you how.

Hope this helps
Regards.

Dec 01, 2008 | Uniden Cordless Phone

Not finding what you are looking for?
Uniden DECT 6.0 Cordless Telephone Expansion Handset Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

Cindy Wells

Level 3 Expert

6068 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

martin hogg

Level 2 Expert

157 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...