Question about GE / Caddx Networx Programmable LCD Keypad NX148E

1 Answer

We have an NX-148E keypad. Our building has 4 doors alarmed to the panel and the Chime sounds when any of the doors is opened. Is it possible to set the Chime only to sound when 1 of the doors is op

Is it possible to set the Chime only to sound when 1 of the doors is opened? In other words, I'd like to disable the Chime for 3 of the 4 doors.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 13 Answers

I am sure there is separate programming for each zone. You will need the manual for the system. Probably can get it on line. This chime feature usually comes from the factory with no zones programmed for reporting. Hope this helps

Posted on Oct 06, 2012

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

russvan

  • 74 Answers

SOURCE: hi i have a ge Caddx NX-148E-RF - beeps only on the hour anoying

Press * 2 and it should tell you what the problem is.

AlarmProfessor.net

Posted on Aug 23, 2010

Sean

  • 78 Answers

SOURCE: have ADT 3000 series alarm system - would like to set it to max

adt sw3000 panel does not support max button on key pad. best solution would be to have ADT tech reprogram Zones so windows are perimeter zones(instant when armed away or stay) and motions interior follower (instant when no perimeter zone was triggered first). doors stay exit/entry.

Posted on Mar 07, 2010

steve_hillin

Steve Hillin

  • 44 Answers

SOURCE: Can I adjust the volume on my GE Networx NX-148E

There are a couple of things you can do, you can silence the keypad via a programming change to the alarm panel, but this requires knowing the installer or 'go' code. On the other hand, you can change the tone of the keypad by pressing * 0 and using the arrow keys to adjust the tone up and down.

Posted on Mar 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radio on but no sound and door chime not working


door chime is activatid by switch on door raido should only come on when key is in on or acc setting if key is not in all the way door chime should not come on at all

Aug 25, 2012 | 2003 GMC Sierra 1500

1 Answer

I think i have a vista keypad. I dont have a manual that shows the keypad features. I like for the doors to chime when opened. They stopped chiming for some reason. can this be reset.


On a vista system, enter your 4 digit code and press the 9 button. The keypad should read: Disarmed Chime. The keypad should ding ding ding when a door is opened. To turn the chime off, enter you code and press the 9 button again.

Jun 18, 2011 | Honeywell 6160 Vista Custom Alpha Keypad

1 Answer

I have the Caddx NX-6 alarm system. Problem: Alarm system will not arm when entering the 4 digit code. Symptom: I have all doors/windows/zones closed. LED displays READY. I press the code and get 3...


If the power was out for 5 hours and the control panel still shows 'low battery', it's probably time to replace the battery for the control panel. However, this shouldn't keep the alarm panel from arming up. I would first try to re-start the control panel by removing the power and battery connection for a few seconds and plugging it back in. After that, it would be a good idea to re-enroll all of your attached sensors, etc. by entering into programming mode and exiting. Press * 8 + {go code} then just press exit. The default 'go' code is 9713. After about 15 seconds, the panel will have auto-enrolled each attached device. Try arming and disarming the panel. Be careful of setting off the alarm, as your monitoring station may dispatch police, etc. in the event of alarm. This is why having a certified alarm installer do this work is a good idea, as they can put your account with the monitoring station on 'test' so alarm signals are recorded for testing purposes but are not acted upon.

Feb 11, 2011 | GE / Caddx NX 6 Fastpack with NX 1308E LED...

1 Answer

Can I adjust the volume on my GE Networx NX-148E keypad?


There are a couple of things you can do, you can silence the keypad via a programming change to the alarm panel, but this requires knowing the installer or 'go' code. On the other hand, you can change the tone of the keypad by pressing * 0 and using the arrow keys to adjust the tone up and down.

Feb 10, 2011 | GE / Caddx Networx Programmable LCD Keypad...

1 Answer

Hi i have a ge Caddx NX-148E-RF - beeps only on the hour anoying


Press * 2 and it should tell you what the problem is.

AlarmProfessor.net

Jul 04, 2010 | GE Security Simon 3 Wireless Home Security...

1 Answer

Have ADT 3000 series alarm system - would like to set it to max


adt sw3000 panel does not support max button on key pad. best solution would be to have ADT tech reprogram Zones so windows are perimeter zones(instant when armed away or stay) and motions interior follower (instant when no perimeter zone was triggered first). doors stay exit/entry.

Feb 25, 2010 | GE Security Simon 3 Wireless Home Security...

1 Answer

Will the alarm go off or not?


Hi, alarms can be programmed to chime/not chime etc. Simple way is actually test it just to be sure. Set the alarm and try the door. If it doesnt work, then the door sensor could be faulty OR that chanel could have been programmed to be bypassed. Will require the user man for programming. Best of luck

Jul 22, 2009 | Kitchen Appliances - Others

1 Answer

1997 venture keyless remote programming


SYSTEM OPERATION

System warning lamp located on top of the instrument panel
Press UNLOCK button once , turns on interior lamps and deactivates alarm (if fitted)
Press UNLOCK button twice w/in 5 seconds unlocks all doors, turns on interior lamp and deactivates alarm (if fitted)
To activate alarm system (if fitted):
Switch ignition OFF
Open driver's door
Press Lock button on remote
Close Driver door
warning lamp will flash when system is activated
Press remote power sliding door button will open sliding door (if fitted) only if unlocked first
Pressing remote panic button:
*Sounds horn intermittently
*Flashes exterior lamps
*Turns on interior lamps
**Pressing panic for the second time OR switching ignition ON deactivates alarm.


PROGRAMMING
Remobe key from ignition switch
Remove the "BCM PRGRM" fuse, from the fuse box
Close all doors
Turn ignition switch to the ACC position
With in 1 SECOND , turn the ignition switch to OFF then back to 'ACC'
(really, with in one second)
Open and close the driver's door. A chime will sound, indicating programming mode activated
Press and HOLD LOCK and UNLOCK SIMULTANEOUSLY untill a chime sounds 2 times ( about 15 seconds)
Repeat this exact procedure for all remotes to be programmed
Remove key from ignition
Refit 'BCM PRGRM' fuse.

4 REMOTES MAXIMUM CAN BE PROGRAMMED

Aug 24, 2008 | 2000 Chevrolet Venture

3 Answers

90 sec count down


You Can Turn off the panel beep under the cover that is what i did.

Apr 15, 2008 | GE Security Simon 3 Wireless Home Security...

Not finding what you are looking for?
GE / Caddx Networx Programmable LCD Keypad   NX148E Logo

Related Topics:

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Home Security Experts

Bill

Level 1 Expert

39 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Are you a GE Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...