Question about Irons

1 Answer

Bosch TDS 1445/05 Sensixx station doesn't making steam

I need help! When I fill the water in the tank and turn on the iron, green lamp which indicate steam ready also turn on. From that reason water in the tank is not heating up. Sometimes, when you shake station, green lamp turn off and water start to heating and station preparing steam. During this time, iron plate is heating normally. Ivan

Posted by on

  • slavon_kt
    slavon_kt Oct 08, 2012

    Hy everybody!I found a problem. One wire from tank heater was disconnected.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 1 Answer

HI!
I HAVE AN Bosch TDS 1445/05 Sensixx AND THE IRON PLADE NOT WORM AT ALL. I CHECK THE POWER.I CHANGE THE THERMOSTAT/THE CONDENSER WITH THE LAMP/.BUT STILL NOT WORK. THE BOILER WORK GOOD.PLEASE HELP ME.WHAT CAN I DO MORE. THANK YOU

Posted on Oct 04, 2017

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Rowenta Steam Iron Leak

I have purchased two Rowenta irons. Both have the problem with water leakage. The entire iron looses all of it's water....both in the stand up position and the sitting down position. This happened after a couple of months for both items. I contacted Rowenta and they never responded. I will never purchase another item from them. Obviously, the irons must be defective. I'm going to contact consumer affairs.

Posted on Sep 03, 2008

Anonymous

  • 1 Answer

SOURCE: euro-pro EP1005 iron--iron heats -blower works-but no steam

You may not need a new iron, my wife's iron is doing the same thing. take the top of the ironing board off (you will need a torx t-20 security bit driver), under the tank is a connection that may have rusted out re-connet it and turn the iron on. Once it heats up, check the tank for leaks. The tank may need to be replace as well or try a 5-minute epoxy type glue on the leaks once it has cooled. If the tank leaks you will get not get enlugh pressure building up to get the steam.

Posted on Jan 05, 2010

heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: ROWENTA STAM IRON - NO STEAM !!!!

Hi,
Try using different water...

Here is a tip that will help you with that problem...

My Steam Iron is Leaking Water
http://www.fixya.com/support/r5301301-steam_iron_leaking_water

heatman101

Posted on Jul 14, 2010

legallawyer

  • 1 Answer

SOURCE: bosh sensixx B25L iron spraying brown water

I have a bosch sensixx b25l and it has started spraying brown water all over the clothes how do I descale it please

Posted on Apr 20, 2011

Linda Price

  • 244 Answers

SOURCE: I have a Bosch Steam

Your steam generator my have mineral deposits that are clogging the steam openings. One of the easiest things to do is to pour out the water and add white vinegar. Let the vinegar sit for about 2 hours. Then turn on the iron and press the steam button until the deposits are loosened and flushed by the heat and steaming vinegar. Do this on a towel or other absorbent fabric so you don't stain your ironing board. You may need to unplug the iron, let it cool and then gently **** the steam vents with a wooden skewer or toothpick.
I hope this helps you. If it does, please rate my suggestion!

Posted on Jun 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My bosch sensixx B22L makes every 5 to 10 min a roaring noice


My iron is leaking water from the plate when using it on the steam why is this?

Jan 02, 2013 | Irons

1 Answer

Bosch sensixx B25L no steam


Are you sure that you have the correct settings chosen? It sounds like you have a faulty unit!

Sep 26, 2012 | Bosch sensixx TDA 8333 Iron

1 Answer

Bosch Sensixx B25L


see the instruction from your manual:
Check the owner's manual for your iron to learn the manufacturer's suggestions for cleaning, what water to use, and storage tips.
Soft-water systems add minerals that can harm an electric steam iron and your clothes so don't fill the iron with softened water. Instead, use filtered or distilled water.
2) if the iron does not heat a( test the power cord for open or defective b) and thermostat for adjust c) test the thermal fuse d) test the heating element for open.
God bless you
8_1_2012_6_19_02_am.jpg

Jul 31, 2012 | Bosch Irons

1 Answer

HI I have a Bosch Sensixx B25L iron. Steam isn't coming out of holes, seems to be escaping from edge of iron. Handle very hot (Too hot to hold on to), burns your hand when steam button is pressed


I just fixed mine - it had exactly the same problem.

First, though, check it's not within the Bosch TWO year guarantee; if it is, they'll either fix or replace it.

If it's not under guarantee then the problem is probably the rubber tubing that connects the external steam tube to the hotplate. You'll need to dismantle the iron. Mine had split right next to the spring clip that holds it on. I shortened it, clipped it back on and all is now well.

Jul 28, 2012 | Bosch sensixx TDA 8333 Iron

1 Answer

I have a Bosch Steam Generator Sensixx B25L that has suddenly stopped producing steam. The iron gets hot so that bit is ok, help, I have a huge pile of ironing!


Your steam generator my have mineral deposits that are clogging the steam openings. One of the easiest things to do is to pour out the water and add white vinegar. Let the vinegar sit for about 2 hours. Then turn on the iron and press the steam button until the deposits are loosened and flushed by the heat and steaming vinegar. Do this on a towel or other absorbent fabric so you don't stain your ironing board. You may need to unplug the iron, let it cool and then gently **** the steam vents with a wooden skewer or toothpick.
I hope this helps you. If it does, please rate my suggestion!

Jun 01, 2011 | Irons

2 Answers

Bosh sensixx B25L iron spraying brown water


I have a bosch sensixx b25l and it has started spraying brown water all over the clothes how do I descale it please

Feb 22, 2010 | Bosch Irons

Not finding what you are looking for?
Irons Logo

Related Topics:

572 people viewed this question

Ask a Question

Usually answered in minutes!

Top Irons Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85219 Answers

Brad Brown

Level 3 Expert

18136 Answers

Are you an Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...