Question about Delta 17-950l Drill Press Depth Adjust Ring 5140030-00
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
This sounds like a morse taper adaptor. if so look at the taper for any unusual wear. if none what I would do is get something like brake clean or similar product to remove all oil and grease. clean the shaft and the internal socket. wipe off with cleam paper towel after cleaning. retract the chuck jaws to prevent damage to the chuck and align the tang on adaptor with the internal socket. Take a piece of wood and hammer and hit the chuck seating the taper. You can also try using the table with a block of wood and the feed handle to seat it. If it continues to fall you have worn parts that need replaced. Good luck
Posted on Jan 07, 2009
I would go to Dewaltservicenet.com and you can download a breakdown and also user manual for this tool with information about the set up and belt assembly, the breakdown would show you how everything is supposed to go in the pulley section. L et me know if you need further help
Posted on Oct 08, 2009
Tips for a great answer:
Oct 17, 2013 | Delta Woodworking Drills
Jan 23, 2013 | Delta Woodworking Vintage Delta Dp 220 14"...
Jan 27, 2012 | Delta Cycle Rothko Rolling Bicycle Stand
Oct 05, 2011 | Delta Woodworking Delta Rockwell 14 Inch...
Mar 16, 2009 | Drills
Feb 17, 2009 | Delta Machinery Delta ShopMaster DP350 12"...
Nov 05, 2019 | Hilti Drills
184 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: