Question about Whirlpool Duet Steam WFW9750WR Washer

1 Answer

Whirlpool duet washer-error F06 and E02 - Whirlpool Duet Steam WFW9750WR Washer

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Whirlpool Master
  • 9,472 Answers

Unfortunately F06 E02 is a very bad error. It means you have an interface communication error. That means that the main control board isn't communicating with the front interface control board. You can pull the washer out and remove the 3 screws coming in from the back of the top panel. Next, the top panel will pull straight back, up, and off. Now check all the wire connections between the two control board and make sure they are all secure. If everything looks good, then the interface control board will need to be ordered and replaced.
Here is a link to the part.

Posted on Oct 20, 2012

  • Shawn Reeder Sherlock
    Shawn Reeder Sherlock Mar 25, 2014

    Hi there I have an issue with mine. I get a e02 code. I was getting f06 but got door unlocked and now e02 comes back.help

×

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 4 Answers

SOURCE: F06 error code on Whirlpool duet washer

I have the whirlpool Duet 9150 with the same issue. I removed, reseated and reconnected every connector at least 4 times with the same random result of F06 to the point where it no longer finished the load. I then removed the motor control board again and sprayed it down with electronic cleaner along with all connections by disconnecting them , spraying them down and then reconnect and connected a few times to ensure good contact. I then tried again and the F -06 code came back. I then ordered the board for $ 150 online . When the new board arrived 4 days later, my wife tried the washer one more time and it worked. I have performed over 2 dozen loads . The board was never replaced. It appeared that spraying the board and connectors worked.

Posted on Mar 24, 2009

Benimur

Louie Role

  • 6966 Answers

SOURCE: whirlpool front load washer GHW9100LW

Hi,

Appreciate the "Ask Me".

My compliments that you have determined that error code F06 indicates drive motor tach error. This relates to the controller board not sensing that the motor is spinning. This could be attributed to three (3) possibilities:

  • motor is not really turning/stuck, a replacement is required;
  • motor is turning but the sensor attached to it is defective and therefore not sending signals to the controller board. Pls check the terminals/connectors/wirings; and/or
  • the controller board input circuitry is defective. It does not register any input from the motor's RPM sensor. This could be a diode, resistor or logic IC. This would be component level repair requiring familiarity with electronic circuitry and components, use of a DVM and a soldering iron. It wold be easier to replace the entire controller board..
In some instances, it could just be the motor's capacitor that is defective. The capacitor provides the initial kick for the motor to start running. Failure on the capacitor will not kick start hence motor will not start hence RPM sensor says to controller board motor not running.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Posted on Aug 16, 2008

prem mathew

  • 662 Answers

SOURCE: F-02 error code on whirlpool front loader duet

http://www.fixya.com/support/r3574284-checking_the_drain_pump_on_a_front_loader

Posted on May 19, 2010

Anonymous

  • 4 Answers

SOURCE: f06 error code on Whirlpool duet washer

I have the whirlpool Duet 9150 with the same issue. I removed, reseated and reconnected every connector at least 4 times with the same random result of F06 to the point where it no longer finished the load. I then removed the motor control board again and sprayed it down with electronic cleaner along with all connections by disconnecting them , spraying them down and then reconnect and connected a few times to ensure good contact. I then tried again and the F -06 code came back. I then ordered the board for $ 150 online . When the new board arrived 4 days later, my wife tried the washer one more time and it worked. I have performed over 2 dozen loads . The board was never replaced. It appeared that spraying the board and connectors worked.

Posted on Mar 24, 2009

Anonymous

  • 2 Answers

SOURCE: whirlpool washer duet

F/06
Drive Motor Tachometer Error
The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin, the door will be unlocked after 3 minutes.

  • Check wire harness connections between the Drive Motor/Tachometer and the Motor Control Unit (MCU), and between the MCU and the Central Control Unit (CCU)
  • Check the Drive Motor
  • Check the MCU
  • Check the Wire Harness

Posted on Nov 30, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is f03 and e02 error codes on duet dryer[not washer]?


Error codes are pretty generic between the washers and dryers. This appears to be a temperature sensor issue.

whirlpool duet dryer f03 and e02 error code Google Search

Same error on a washer
How to repair whirlpool duet error F3 E2

Aug 20, 2018 | Washing Machines

1 Answer

What is F06 & E02 mean?


Unfortunately, this error means that the central control unit and user interface aren't communicating. Sometimes, a temporary solution can be to simply unplug the washer for a bit. This will reset the error code that is in memory. If the error persists, you will need to again unplug the washer and get behind it. Take off the top panel (for the back) to access the control boards. Plug the unit in again and check the wiring between the CCU and the user interface. Make sure that the connectors aren't loose. Then remove them and check the voltages or resistance across various points. (There should be a tech sheet with the details for where you should put the multimeter and the values you should get.)

Depending on the readings you may need to replace the User Interface and/or the CCU. http://www.appliancepartspros.com/control-panel-parts-for-whirlpool-ghw9150pw0.html as some of the parts.

I hope this helps.

Cindy Wells

Aug 06, 2015 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

My Whirlpool Duet is showing error codes f06 and e02 and wont unlock door or run cycle, what can I do?


Janice,
Here is a link to a website that gives the F06 code, but I cannot find the other code.
http://www.appliancepartspros.com/repair-help/whirlpool-fault-codes.
Scroll down towards the bottom to find the Duet fault codes.

Jul 28, 2015 | Whirlpool WFW94HEX Duet 5.0 cu. ft. Front...

1 Answer

Error Code 01 F06


Your fault is mentioned here.

An F06 fault code in a Whirlpool Duet washer (the Kenmore HE3/4t's are also made by Whirlpool) usually means a motor-related problem. It usually pops up when the drum won't rotate at all or only very sluggishly. Here's the excerpt from the Whirlpool Duet Service Manual on this:

http://fixitnow.com/wp/2008/10/28/whirlpool-duet-washer-with-an-f06-fault-code/

May 10, 2015 | Maytag Dryers

1 Answer

How do I unlock the door on front loading whirlpool duet GHW9150p washer


under door switch pull down the plastique tab (some tine black some time white) about 1 cm.. you will have to slide your hand in there and it aint easy but the tab is there..

Oct 16, 2014 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

What do these 2 codes mean on my maytag washer , F06 and E02?


The error code E02 and F06 on a Maytag washer could mean that the hot water solenoid went out. It could also mean that that the hot water control is not working properly.

Sep 23, 2014 | Maytag Washing Machines

1 Answer

F06, E02


I think these problems are related to water inlet, take off the hoses from the back of washer and you will find a screen in the outlets clean with old tooth brush until clear.

Feb 19, 2014 | Whirlpool WFW95HEXW Duet 5.0 cu. ft....

1 Answer

Whirlpool duet front load washer, F06 error


FROM WHAT I CAN FIND OUT YOU HAVE A DRIVE MOTOR PROBLEM,
IF YOU TYPE IN YOUR SEARCH BOX (WHIRLPOOL FAULT CODE F06) there are several several sites that tell you how to fix it

Nov 25, 2012 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool Duet Steam WFW9750WR Washer Logo

25,340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...