Question about Dryers
NOTE: Some of the parts shown may not be for your appliance
The model number from your search was either missing or incomplete.
· Choose the best fit from the Model Number box to the left, or
· Check your appliance again to obtain a more complete model number
· To continue without a model number, use Narrow Your Search options
· Some models always have 3 numbers first, like this (123.456789)
// Model Number Locator Tips
1. A zero in the model number might be the letter O.
2. A lower case L might be a 1.
3. Some models have 3 digits and a period first, like this 555.66666666
Look for an aluminum tag--or a silver and white adhesive label in the locations illustrated below. The model number may be printed or stamped onto the tag and may be printed in different type sizes. NOTE: There may be partial model numbers on marketing stickers or in the owner's manual. These are often incomplete. For best results use the model number from the tag. Gas Electric Whirlpool Style 1 Gas Electric Whirlpool Style 2 Gas Electric GE Style GE Electric Maytag Style
Posted on Jan 03, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: roper dryer won't heat
first thing is check the voltage between the black and red terminals at the back of the dryer. you should read 240v. then check the voltage between the balck and the white and the red and the white. there should be 120v at each. if all that is good remove the back of the dryer. make sure you unplug it first. then no the lower right you will see the heater. near the top of the heater you will see a red wire and a red/with a white stripe wire attached to the high limit cutout. remove one wier and check the switch for continuity. if you read nothing its bad and thats why there is o heat. Ifnit checks good replace the wire and then remove one red wire from the heater. then check the heater with your meter. most times on the whirlpool products its one of the two that is bad. check the two thing I described and if you still need help feel free to get back to me and we can go from there.Good luck
Posted on Aug 22, 2007
My bet is that your ignitor is bad....change the ignitor and you will be working again...
Here is a tip that I wrote about your problem that will explain it further...
Posted on Mar 30, 2010
SOURCE: My dryer is about 7
If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.
Check out this tip that will give more details…
Gas dryer not working gas dryer not heating
If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.
Check out this tip to see the things that can fail to cause your electric dryer not to work.
Dryer Troubleshooting Electric dryer wont heat
Posted on Aug 23, 2010
Tips for a great answer:
Feb 11, 2011 | Whirlpool Dryers
Oct 29, 2010 | Roper Dryers
Oct 25, 2010 | Roper RES7648E Dryer
Aug 23, 2010 | Whirlpool Dryers
Aug 16, 2009 | Whirlpool Dryers
Apr 04, 2009 | Roper RGX4634KQ Gas Dryer
Jan 28, 2009 | Roper RGX4634KQ Gas Dryer
Jan 04, 2009 | Roper REX4634KQ Electric Dryer
Mar 14, 2008 | Roper RES7646KQ Electric Dryer
294 people viewed this question
Usually answered in minutes!