Question about Maytag Performa PAV2200
It just leaks water.
Remove the 2 screws on the front panel and remove the panel. Run a cycle and look for the leak. Post back your findings.
Posted on Nov 05, 2012
SOURCE: Maytag Performa washer dead.
Your door lid has a switch that makes these functions work.First open the lid and look at the right side of it.Does it have a arm on it?If it does follow the direction where it is going to hit and now listn closely while your lifting the door up & down at this contact can you hear it click?If its not clicking or the arm is broken off the lid replace the lid switch/or the broken lid switch arm.
Posted on May 23, 2008
SOURCE: Maytag Performa water level
A defect in the water-inlet valve may mean that it's no longer able to shut off completely when the electricity has been turned off to it. If this occurs, the valve may leak and drip water into the clothes tub. In time, the water may accumulate substantially. If this happens, you need to replace the valve.
Water-level switch A defect--or an obstruction--in the water-level switch may mean that it can't tell the water to shut off. So the machine overflows. This switch senses the water level in the clothes tub. It's usually a diaphragm device with a small, clear tube attached between the switch and the bottom of the washer's outer tub. As the water level in the tub increases, the pressure on the air in the tube increases. When the pressure reaches a certain level, it activates the switch, shuts off the water, and signals the timer to begin the agitate cycle. You can either clear any obstruction in the tube or replace the water-level switch.
Posted on Jul 13, 2008
SOURCE: I have a Maytag (Performa)
Searspartdirect.com carries all the major brand names. Just type in your model number in the search menu and use the exploded view diagrams under the various parts headings on the next page. If you do not wish to order on line, or wish to use another website, use the part number provided on the Sears website. Maytag identifies some of their parts by different series. If the part you need is listed this way and you are confused, please post back and I can assist. Make sure you provide your model number for me. I hope this helps you.
Posted on Aug 12, 2008
if it sounds like a boeing jet, you will need a new seal & bearing kit. This is something a technician would have to do. many "special" spanner wrenches and spring tools required
Posted on Feb 24, 2009
Tips for a great answer:
Oct 29, 2010 | Maytag Performa PAV2200
Nov 12, 2009 | Maytag Performa PAV2200
Oct 13, 2009 | Maytag Performa PAV2200
Sep 14, 2009 | Maytag Performa PAV2200
Jul 05, 2009 | Maytag PAV2300 Top Load Washer
Sep 16, 2008 | Maytag Performa PAV2200
Jul 13, 2008 | Maytag Performa PAV2200
Jul 03, 2007 | Maytag Performa PAV2200
44 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: