Question about Whirlpool 24 in. DU915PWP Built-in Dishwasher

Open Question

Whirlpool dishwasher Found a large blue rubber band inside after cycle ran

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Garth Jackson

  • 93 Answers

SOURCE: ran on normal cycle when done 2 inches of water on bottom

Test by restarting the cycle and see if water drains if it does not then there is either a blockege in the pipe ,pump,or in the machine where the water passes out normally through a filter if you have checked and cleaned out filter and drain pipe and there is still no draining then listen to the pump if you can hear a humming niose then there is something in the pump itself and you need to take it out and inspect the impelar houseing remove what ever is there put back and enjoy if there is no noise and pump is clean then it is proberly fualty and nedd replaceing.

Posted on Jan 23, 2009

Ad
mc1bean

Mike Cairns

  • 3053 Answers

SOURCE: My Whirlpool ADG7540 built-in dishwasher

Hello, keith

I was trying to help you out here. I was going back to some customers that asked questions in the past and it appeared that no one answered them, so I thought I would take some of my personal time to see if I can help. Here is a link to about everything you want to know about your dishwasher, from repair to trouble shooting it,pictures, video's. Just scroll around and you will see tons of information to almost any question you might have on your dishwasher. If you go to this link and click around, I am sure you will find out so much about your dishwasher, you will know more that the company that made it. Here Is the link for you to click on>>

http://home.howstuffworks.com/dishwasher.htm


Please if this helped you at all, if you can find the time to rate my help and some kind words written would be appreciated for my free help , I would appreciate it. Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive,Appliance, and Electronics. Drop In anytime for my help. Thanks,Mike

http://beta.fixya.com/users/mc1bean

Posted on Oct 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a new dishwasher, been ran twice and it smells terrible and stays soaked inside


A large object is lodged inside the drain pipe and will not allow water to drain.
Have someone remove the clog and run a empty cycle to flush more deposits.
Hope this helps!

May 10, 2016 | Samsung Dishwashers

1 Answer

Found a blue rubber type substance in dishwasher after cycle?


I found the same blue rubbery stuff all over the inside of the dishwasher. We used Finish Gel for a couple years. Here is what it looks like
found-blue-rubber-type-substance-in-oyl4e2zjrxrgvpudvwrke5hk-2-0.jpg

found-blue-rubber-type-substance-in-oyl4e2zjrxrgvpudvwrke5hk-2-2.jpg

Dec 17, 2010 | KitchenAid KUDR25 Dishwasher

3 Answers

Large blue band appeared on lower tray following wash cycle,


So. We had the same problem tonight and I have been sitting lookin at this thing for an hour and decided to run it and see what happened with no rubber band in there. After the cycle was over I noticed that my wife washes those "snap wear" containers in the dishwasher and these items have colored coated Mylar bands as sealers. When they heat they expand and can be dislodged. It was a coincidence that it wrapped itself around the bottom spinner. Myth debunked!!!!!

Mar 10, 2010 | Bosch Dishwashers

1 Answer

Kenmore Ultra Wash 15812990 won't drain... I have already checked the connection between the dishwasher and the house drain line and the issue is above that. Someone suggested I clean out the food...


I removed the kick plate and unhooked the hose that connects to the bottom of the dishwasher. When I didn't get a gush of water, I knew my problem was higher than that. I took a pair tweezers and stuck it up the spout and found nothing. So I attempted to drain the diswasher with the hose unhooked and got some water to come out. I did this several times and apparently flushed down a large piece of rubber--either from a water bottle or a broken piece from inside the dishwasher. I removed that piece and had pressure when the drain button was activated. So I hooked the hose back up and ran a rinse cycle--and it drained fine.

Oct 30, 2009 | Kenmore Dishwashers

1 Answer

RE: ge gsd2000j01ww When I opened my dishwasher after a run... I found a white large belt (rubber band like) on the top shelf. I have no idea where it belongs


At the bottom of the dishwasher (older GE) you see a plastic cover with rounded corners and two 'grill' shaped sides. Remove the screws (1\4) and lift the cover. There might be a huge amount of grey clog and dirt stuck on the inside already. Remove it with a fork or long brush and rinse it. There is another grill in the water hole pull it out and clean it as necessary. You may also want to reach into and check the water hole for debris. If you are not comfortable doing so you can remove the water by pushing an old towel into the hole first. Once all parts are clean put them back in place and fix the cover with the screws. Pour 2-3 table spoons of bleach into the machine and let it run twice on heavy duty cycles.

Jul 24, 2009 | GE 15" Laundry Pedestal for Horizontal...

1 Answer

Whirlpool dishwasher won't drain and won't run cycles - it's dead


I would think the dish washer control panel has burned out.

May 01, 2017 | Dishwashers

2 Answers

Dishwasher filling correctly?


john, the dishwasher has a timed fill, make sure you are using 3/8 inch line. If you are using 1/4 inch, that would be your problem. The fill should be just below the heating element. If you are using the 3/8 inch line, the next suspect would be the fill valve itself. Make sure nothing is kinked, Catriver.

Jun 17, 2007 | Whirlpool GU2700XTSS / GU2700XTSY Built-in...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4363 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Bruce Denton

Level 2 Expert

273 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...