Question about GE Profile JTP56 Electric Double Oven

2 Answers

Ge oven problem

9 year old Ge profile oven. model # JSP40 Wife went to clean and now we have a continuous flashing "door locked" door is not locked....range will not work. Cannot get it to stop flashing even after unplugging for 15 minutes. Any suggestions?

Posted by on

  • 7 more comments 
  • gmeltzer Dec 09, 2007

    i just finished cleaning the oven and I too am getting an F2 error with non-stop beeping. Please help. We have had the panel replaced once already--We have used our oven maybe a total of 40 hours in 10 years,

    gmeltzer@yahoo.com

  • jshinstine1 Apr 28, 2009

    April 09, just cleaned my oven and have the same problem. Locked light flashes, oven locks and unlocks, locks and unlocks all night. Turned off power, reset, now cleaning my oven a second time hoping to trigger something off.

  • Anonymous Mar 15, 2014

    Says locked door & no function will work?

  • Anonymous Mar 17, 2014

    Need to remove the oven door to replace the igniter

  • Anonymous Mar 21, 2014

    door doesn't close completely

  • Anonymous Mar 29, 2014

    trying to activiate clean mode and after set the door light flashes and cleaning will not begin

  • Anonymous Mar 29, 2014

    the door light flashes and the door will not lock to clean oven

  • Anonymous Mar 29, 2014

    how to bypass door lock mechanism in order to activate cleaning process

  • Anonymous Mar 30, 2014

    The door on the convection side of model # 240462603 has locked for some reason and we tried unplugging the oven but that didn't't work -- any suggestions?

×

Ad

2 Answers

Wondering if you ever solved this problem? I have the same issue with the Profile - just cleaned the bottom oven of a 8 yr. old model, and flashing "door locked" though door is not locked.

Posted on Jun 30, 2007

Ad

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 87 Answers

Look for a microswitch connected to the lock mechanism at the back of the stove. The switch is probably broken.

Posted on Jun 08, 2007

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a GE Profile self cleaning oven. JSP46 model. When I broil for around 15-20 mins, the panel flashes door locked and the oven shuts off. I always broil with the door open.


Hello,
You should replace the door lock mechanism and the door switch.

Global Solutions Appliance Repair
https://gsappliancerepairnyc.com/

Aug 07, 2018 | GE Ovens

1 Answer

GE True Temp Profile Oven, Locked Door Light stuck on


there should be some type of button that the door hits to turn it on and off

Mar 24, 2009 | GE Profile JTP18 Electric Single Oven

1 Answer

GE Elec oven JT952-30" blinks the "lock" after self-clean


Try unplugging power cord or trip circuit breaker, to cut the power to the appliance, then wait one or towo hours for the oven to cool down completely.

If the door stays locked, then there is a fault, probably a faulty temp probe that had blown because of high temperatures generated on self cleaning, or a defective control assembly. In that case you will need to call a technician to take apart the oven and fix the fault.

Enter model number here to find assembly diagrams and parts.



Jan 02, 2009 | GE Profile JT952 Electric Double Oven

1 Answer

JTP56 Self Cleaning issue


It sounds like you need to replace the door latch assembly. One of the switches on it is not working properly so the control is not getting the correct signal for the door latch position. It could be an oven control problem, but most likely it is the latch.
Post back with the complete model number from the oven if you need more help and I will answer as soon as I can.
Thanks, Mike

May 06, 2008 | GE Profile JTP56 Electric Double Oven

1 Answer

"Door Locked" keeps flashing


Was able to get the lock to go in on the door and then turned off the power which reset the system.

Mar 31, 2008 | GE Profile JTP56 Electric Double Oven

1 Answer

Door Keeps Locking and Unlocking after Power Outage


Located the switch - resetting fixed my stove as well.

Dec 17, 2007 | GE Profile JTP18 Electric Single Oven

1 Answer

Ge oven problem


door lock is not work check wires motor and switchs.. you may have to replace the door lock

Dec 11, 2007 | Amana AOCS3040 Electric Single Oven

1 Answer

Ge wall oven blinking door locked for days


The switch inside the door lock mechanism is stuck down making the unit think it is still locked.  the switched is located next to the hook that locks your door.

Oct 29, 2007 | GE Profile JTP56 Electric Double Oven

10 Answers

Our GE Profile JTP18 keeps flashing "door lock" since we ran a self clean


most of the time a simple fix.... http://www.geappliances.com/search/fast/infobase/10004586.htm
you have to trick the door lock mech into cycling through the cleaning process (takes about 20 seconds)
Print Range - “LOCKED DOOR” flashes in the display

If “LOCKED DOOR” is flashing in the display of your range or oven, and the self-clean cycle has not been selected, follow the steps below to reset your control:

Motorized Switch
    1. With the door open, locate the door jamb switch on the face of the oven. It will look like a small black post or dowel.
    2. Push it in until the oven cavity light goes off, indicating that the oven believes the door is closed.
    3. While you hold the door jamb switch in this position, complete the following steps.
    4. Press the Clean pad, wait 10 seconds.
    5. When the cycle initiates, press the clear/off or cancel pad immediately to cancel it.
    6. Wait 10 seconds for the display to clear.
    7. The door should unlock and there should not be a need for service.
Manual Switch
    1. Press the Clean pad.
    2. Close the door.
    3. Slide the latch to lock the door.
    4. Hit the cancel button immediately.
    5. Unlock the door.
If the above does not correct the situation, a service technician will need to check your cooking product. To obtain in or out of warranty repair on Major Appliances, you may call 1-800-GE-CARES (800-432-2737) or schedule service online.

Sep 14, 2007 | GE Profile JTP18 Electric Single Oven

Not finding what you are looking for?
GE Profile JTP56 Electric Double Oven Logo

1,460 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...