Question about OKI C5800Ldn Led Printer
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Oki c5800 laser printer
At the bottom you will see the file C58uEN1.pdf
Go to page 89
Posted on Mar 26, 2008
SOURCE: OKI C5800 ERROR MESSAGE- DRUM
try to check the drum first!!!
clean it with the dry tissue?
there a lifespan of the drum
i have the same problem with that.
my drum capacity is only 30,000 copies
so then i replaced it! and works fine now
so try to replaced the drum it might on it capacity
or clean it
try to email me firstname.lastname@example.org
Posted on Sep 19, 2008
SOURCE: OKI C5800 SHOWS: ORDER K TONER
If you have replaced the K cartridge, and it still gives you this message, it is due to the sensor bieng blocked or bad. Take out your K cartridge, clean out any loose toner. Do not blow it back into the unit. Use a cotton pad or cloth to clean it out. Then you have to clen the sensor itself. it is recessed on the right wall of the unit ,across where the K cartridge sits. Here is where you have to purchase a can of compressed air and shoot it into the opening with the plastic straw that comes with the can air.. (Again, do not blow air all over the inside of the unit!!) Just shoot it in the opening to clean the sensor LED.
This is a common problem caused by toner spills.
If I could be of further assistance let me know, Otherwise please rate this solution. Thanks,Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309
Posted on Apr 24, 2009
From the service manual, doesn't look good.
A technicain will have to look at the printer.
RFID Reader I/F Error
An interface error was detected with the RFID reader device.
01 : communication error between the RFID reader and the engine PCB.
02 : the transceiver circuit error of the RFID reader.
03 : communication error between the RFID reader and the Tag chip.
04 : the RFID Tag detection error (more than 4 chips).
If rebooting the machine does not improve the symptom, you need to
check the device.
Posted on Mar 29, 2010
Tips for a great answer:
Feb 12, 2015 | Computers & Internet
Jan 20, 2014 | Oki Electric Industry C5900N Led Printer
Aug 30, 2012 | Gigabyte (GA-M61PME-S2) Motherboard
Jun 06, 2010 | Dell Inspiron 1000 Notebook
Apr 12, 2010 | NetGear : WG111 54 Mbps Wireless USB 2.0...
Jul 10, 2009 | OKI C5500n Printer
Apr 14, 2009 | Computers & Internet
Mar 26, 2008 | OKI C5800Ldn Led Printer
75 people viewed this question
Usually answered in minutes!