Question about Krell KAV400Xi Amplifier

Open Question

Krell kav 400 xi cracking low volume won't turn up

Dial works good goes up but volume very very low

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
dunnbiker

David Dunn

  • 8546 Answers

SOURCE: Hi, Will the krell kav 500i work on 220v 50hz

If it has a voltage selector for 220v, once configured it will work just fine Being electronic instead of mechanical the power frequency won't affect it. If it doesn't have a voltage selctor, don't plug it into 220.

Posted on Dec 26, 2009

Ad
supertech6

John Street

  • 513 Answers

SOURCE: Hello, after plugging on Ipod through my preamp

Sounds like the volume was way up when the iPod turned on. iPods are DC and cause a sudden thump through the speakers when they power on.
If the fuse is not blown, there may be another fuse you have not seen. Most amps have three to five fuses especially a 150watt/channel like the Krell.

Posted on Apr 17, 2010

petraman7

Scott Frye

  • 1175 Answers

SOURCE: Not enough bass response, how do I increase the bass?

Check the Krell website

Posted on Apr 17, 2010

ABRsvcs

  • 4234 Answers

SOURCE: Hello If i wanted to refresh my Krell KAV-300i

Can you please provide more information about what you mean by "refresh"? Is there a performance problem or funcitonal problem with the unit?

Thanks,
Dan

Posted on Aug 17, 2010

jdvillanueva

Jdvillanueva

  • 2098 Answers

SOURCE: I have a Krell KAV-400xi

Hi,

Try to plug it in other known working outlet, if still the same symptoms, this is an indication that there's a faulty parts inside the unit. First thing to check is the internal fuse of your unit (I'm assuming here that the unit has no led light at the front panel), if it is already out of warranty, open the top cover and check the continuity of the fuse using the multimeter, if you found it open replaced it with same current(ampere) rating and then power on the unit again... Sometimes fuse fail because of voltage surge to guard other parts...

Jdvillanueva

Posted on Sep 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV Volume problems, it's Low and won't go Hi


Check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/

Mar 31, 2015 | Televison & Video

1 Answer

How to adjust volume on left speaker? volume is extremely low on that side.


Its most likely the balance or fader that is causing the volume difference. set both of them to the mid setting ( usually straight up on a round dial) and check the volume again. if its still low check the speaker wire connection if it looks good on the bad side try swapping the cables from left to right. if the same side is still low the issue is most likely the amp.

Jun 13, 2014 | Logitech X-140 Speaker

1 Answer

2001 saab the radio volume is super low


Turn the volume dial clockwise! Amazingly the dial labelled VOLUME is the way to increase how load it is.

Apr 13, 2013 | Saab Cars & Trucks

1 Answer

Kenwood km-994 is to loud when volume dial is on low and will blow speakers if I turn it up


I'm no sure what you're asking. Do you mean that it goes directly from low to high immediately when you turn the dial(I'm assuming it has a dial, I haven't looked it up) or push the up or down button?

Answer is, if rotary, a bad rotary switch, or in both cases, a bad microprocessor or electronic volume.

May 02, 2012 | Kenwood Audio Players & Recorders

1 Answer

I have a pioneer vsx-d704s reciever and when it is at a very low to 0 volume i get a low level scratching only on the left side. im not sure if it goes away when i turn it up or not but i dont think so


The volume knob is dirty. Behind the face of receiver the "pot", (as they are called) needs sprayed with contact cleaner. I use CRC QD contact cleaner. If the volume is a slider your can use the straw type devise for pin point spraying in the slider slot with receiver off and unplugged. After spraying work the slider back and forth to distribute the cleaner inside. If you have to remove the cover for a rotary "pot"spray while working the dial. Hope that helps..

Jul 16, 2011 | Pioneer VSX-D704S Receiver

2 Answers

Radio on 2008 dodge nitro stops working it goes out for a while then comes back on. no sound even when turning the volume up and down. it makes a loud popping noise and goes out.


Im having the same problem! No pop, just a hum, and my volume dial won't adjust. Like the actual dial isn't working. I can't use radio, cd, or aux. Silence SUCKS.

May 31, 2011 | 2008 Dodge Nitro

1 Answer

I own a Sony-Ericsson P1i. Its sound volume is very low and though I have kept it on the maximum, I can barely hear the opposite person talking to me. But the music volume is okay, and so is the headphone...


I had this problem too but i found this on the web so i'm gonna copy paste . Good luck!
"The low volume in the in calls in SE P1 / P1i can be easily solved in this way/hack:
(Thanks to montsma, the Junior Member AT noeman.org)

Speaker volume in P1i Service Menu

Go to the Main Menu > Phone > Phone to open the virtual numeric keyboard.

Do the following;

- 1 click up on jog dial and press (*)
- 2 clicks down on jog dial and press (*)
- 1 click down on jog dial and press (*)

to open the hidden Service Menus part of the phone.

Then go to the Service Tests > Speakers.

There are two selections, rear and front, and the "front" adjusts the volume of the ear speaker, which is used during the calls. Increase the volume to %100. Quit the Service Menus and make your call. I made one try and it was cool!"

Apr 03, 2009 | Sony Ericsson P1i

1 Answer

Volume dial not working


i would recommend you ask logitech if they can fix it, if the cost is too high i would go look for other stores that fix speakers, if it still cant be fixed, your better off buying new ones because having speakers like those for 5 years is a long time, it may just be time to change

Feb 08, 2009 | Audio Players & Recorders

1 Answer

Tivoli Radio "Model One" Volume Problem


TRY SPRAYING A LITTLE CONTACT CLEANER ON THE VOLUME CONTROLL
I EVEN USED RUBBING ALCOHOL.

Mar 23, 2008 | Tivoli Henry Kloss Model Two FM/AM Radio

Not finding what you are looking for?
Krell KAV400Xi Amplifier Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Krell Audio Players & Recorders Experts

80stech

Level 2 Expert

120 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Gil Shultz

Level 3 Expert

3388 Answers

Are you a Krell Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...