Question about OKI C5800Ldn Led Printer

Open Question

Error 134, oki ES5461 - OKI C5800Ldn Led Printer

Posted by Anonymous on

Ad

3 Suggested Answers

Phat3

Phat3

  • 95 Answers

SOURCE: my OKI B4600 is displaying

The Oki error 124 refers to:

LED Head Missing, Color:Black
When black LED head connection cannot be detected.

If restarting the printer doesn't solve the problem, i'm afraid it's the printer fault and you should call the OKI service.
You can find Info on how to contact them right here:
http://my.okidata.com/home.nsf/contactus?OpenFrameset

Posted on Mar 01, 2011

Ad
zeclaudioagu

zeclaudioagu

  • 1 Answer

SOURCE: my OKI B4600 is displaying

My solution was even easier:
1. Turn the printer off

2. Remove the cartridge from the printer
3. Turn it on
4. Insert the same cartridge again
That's it!

Posted on Dec 19, 2012

Ad
danblack67

Dan Black

  • 5 Answers

SOURCE: my OKI B4600 is displaying

It means the printhead [laser] is "missing" - but usually it's just the data cable at the end of the printhead has popped out. Very common - we have hundreds of Okis at our corp and I've fixed this many times. Turn the power off, pull either the left or right plastic clip AWAY from the printhead, and carefully insert the data cable back into the connector on the printhead. Put one end of the printhead nearest the data cable back into its plastic clip, and make sure the spring is seated on its little post on the bar, and then click the rest of the printhead into the clip on the end opposite of the data cable, again making sure the spring is seated on its post. Turn the printer on - your error should now be gone.

Posted on Aug 05, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an Oki es5461 printer and now the colours are out of alignment by approx 1mm (except for black). Is there any way to re-align the led heads or whatever might be causing this issue?.


It would be unusual for all the colours to go out of alignment. Its probably just black but to re calibrate them all just turn of the power. Pull out all the ribbon cables to the four print heads. Make sure their ends touch no metal parts. Close the cover carefully and turn the power back on. You will hear no sounds then after intitializing you will get a fatal error 13-. Turn the power off and reconnect the ribbon cables. Turn the power back on and recalibration will take place (you wont see it happen) and all will be well.

Dec 06, 2017 | OKI Office Equipment & Supplies

1 Answer

How to fix okidata c 711 error code 134


Error code 134 on the OKI C711 refers to the white ribbon cable that plugs into the Black LED head. If it has come out of the head then check that the silver contacts are in good condition and none are touching each other. If any of them are touching each other then its a certainty that fuse F12 on the main board will have blown. If they are good then push it back in but this must only be done with the power off. I cant remember whether the 711 has a plug on the end of the cable or just has silver contacts. If F12 has blown then you cant replace it as its part of the board. Only a pcb repairer can change it or fitting a new board.

Dec 08, 2016 | OKI Office Equipment & Supplies

1 Answer

How to fix oki error code 134


This machine will most probably require the main board as sometimes the heads can get knocked and temporarily disconnect. I have had this a few times and replaced many boards (the fuse blows that supplies the heads on the board).

Also, before replacing the board, the values of the faulty board will need to be pulled off with MUWIN and put onto the new board (meter readings and consumable usage).

Dec 08, 2016 | OKI Office Equipment & Supplies

1 Answer

134 error


134 error is led head missing , the fault is either ( if your lucky) the k led ribbon cable has become unseated or the k ribbon pins are damaged (you can trim them with scissors.
Alternatively more often than not someone has nicked the led bar off and tried to put the cable back in without turning the printer off blowing the fuse on the maintenance board. The holders for that model are prone to cracking also.

Apr 10, 2014 | OKI Office Equipment & Supplies

1 Answer

Oki b431 service 134


It may be necessary to replace the LED head. Part number 44317201

Apr 03, 2014 | Oki Electric Industry B431dn Printer

1 Answer

En la pantallade la impresora oki B4350 me marca error 134


Tengo una Oki mc361/mc561 me da error 134 como puedo solucionarlo

Aug 26, 2011 | OKI B4350 Laser Printer

3 Answers

My OKI B4600 is displaying error 134


It means the printhead [laser] is "missing" - but usually it's just the data cable at the end of the printhead has popped out. Very common - we have hundreds of Okis at our corp and I've fixed this many times. Turn the power off, pull either the left or right plastic clip AWAY from the printhead, and carefully insert the data cable back into the connector on the printhead. Put one end of the printhead nearest the data cable back into its plastic clip, and make sure the spring is seated on its little post on the bar, and then click the rest of the printhead into the clip on the end opposite of the data cable, again making sure the spring is seated on its post. Turn the printer on - your error should now be gone.

Mar 01, 2011 | OKI Electric Industry B4600 Laser Printer

1 Answer

Fatal error 134


flat barra led diconnect / barra led sporca

Nov 29, 2010 | OKI C5800Ldn Led Printer

1 Answer

Oki c5650, fatal error


tengo una impresora oki y me muestra error fatal en la pantalla que debo hacer para quitarle ese error de mi impresora

Apr 26, 2010 | OKI C5650n LED Laser Printer

Not finding what you are looking for?
OKI C5800Ldn Led Printer Logo

Related Topics:

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

Ekse

Level 3 Expert

13434 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...