Question about Sansui HDLCD-2200 22 in. LCD TV

Open Question

TV blurry picture using it with computer

I've used two different video cards with my computer using this tv as a second monitor. The image is low resolution or not sharp. I've changed settings both for the tv and for the video card. Still bad picture. Its hard to read text in browsers and music player. Any Suggestions?

Posted by Anonymous on

Ad

3 Suggested Answers

David Reeves

  • 27 Answers

SOURCE: Can't display 1440x900?

I have a different LCD TV and video card, but I have the same issue.

To work around it, I have to toggle to make it the primary output. It will not work if set to extended, or set to both screens.

Posted on Apr 02, 2009

Ad

Bob Citizen

  • 520 Answers

SOURCE: sansui tv doesn't read USB video

The USB port on HDLCD4212 is only for servicing the tv. It will not read video.

Posted on Jun 16, 2011

Ad
gopakumarg43

The Knight

  • 76237 Answers

SOURCE: Computer vga cable/ sansui tv problem

Hello
Nvedia signals cannot be porcessed by Sansui Tv. You have tow options before you to connect your self assembled computer to this tV. The first one is try by reducing the resolution f VGA output. for that, go to Nvidea control [normally will be displayed at the right end of the taskbar] and chage relolution there. By default, the resolution will be 1024/768. Select it to the lowest; 800/600. If the TV display it, just advance it to the next highest; 960/600.
If this does not help you, there is no other way than change the computer's video card to any other, which works on Windows Video Drive. Can be bought from local computer component market, insert it to one amoung the free PCI socket of the computer and do the next proceedings to change over video output from on board video out, and feed this video signal to yur TV. OK.

Posted on Nov 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Monitor's resolution need to be increased, how?


Hi

You don't say which operating system you are using.

The monitor resolves images across a fixed range of resolutions and resfresh rates.

It is the resolution of the graphics card or graphics adapter that can be changed, not that of the monitor.

Right click on empty space on your desktop > properties > settings.

Left click and hold on the slider and slide to the right in stages.

Each resolution change offers you a test page to accept or reject.

When satisfied Apply > Yes > Ok.

To reset the Refresh Rate:

Properties > settings > Advanced > Refresh Rate.

Then restart your computer.

Be careful not to exceed the resolution/refresh rate range of your monitor (1280 x 1024) / 75.0 Hz because if you do, when you restart the computer, the monitor will be unable to resolve the image and you will get a blank screen and/or an Out Of Range error message.

An out of range problem might only be resolved by using a different monitor to reset the resolution back to within the range of the preferred monitor.

Hope this helps

Aug 22, 2011 | Northgate MONNG7NSS 17" Flat Panel LCD...

3 Answers

Video images transferred to PC are not as sharp as when played back on camera LCD


How about different videos do they have the same resolution? If yes the problem here is not with the video from the camera it can be the resolution of your computer , because if the video card of your computer is not high and the resolution is also not that high video will not look sharp when play to the computer compare when play directly from the camera...

Hope that helps.........

Aug 27, 2008 | HP Photosmart E317 Digital Camera

1 Answer

I accidently hit recall on my monitor settings. I now have a smaller veiwing screen with black edges


You didn't say which OS you're using but it sounds like you've changed the aspect ratio of your video signal. Different screen resolutions have somewhat different aspect ratios. The aspect ratio indicates the ratio of the number of pixels of width to those of height. For example: my video driver offers a resolution of 1280 x 960 or 1280 x 720 which would give screen aspect ratios of 1280/960 = 1.33 :1 and 1280/720 = 1.77 : 1. The latter would produce a narrower image. You can compensate somewhat by increasing your horizontal sweep voltage with your monitor menu. A better solution would be to select a resolution that more closely matches your monitor's screen size.

Aug 10, 2011 | Dell D1028L 17" CRT Monitor

1 Answer

I have a computer that i run dual montors on, both plug into the same video card, both monitors are crt's. my video card has 1 vga connector and 1 dvi connector. so i use a dvi to vga addaptor. now...


It is possible that you've got the resolution and vertical refresh rate set too high. CRTs tend to flicker if the vertical refresh rate is not set to about 72 to 75 Hz. If your screen resolution it set fairly high compared to what the monitor was designed to display it can overtax the video sweep circuitry in the monitor. If possible check the manufacturer's specs.

Often the video driver will let you specify different resolutions for primary and secondary monitor. If you can't find the manufacturer's specs it would be prudent to pick a less demanding resolution or vertical refresh rate for the secondary monitor.

Aug 10, 2011 | Computers & Internet

1 Answer

Hello, My winXP cannot recognize monitor Asus VH232T - windows suggests 4:3 resolutions only. Can you please advise where can I download the monitor driver? Video card is ATI RADEON XPRESS 200 Thank...


Hi

Monitors do not generally require drivers. The .inf drivers to run almost all monitors are already in Windows.

The problem here is in the settings of the graphics card.

Many users aim for Maximum resolution, when what they should aim for is Optimum resolution, balancing the RAM, CPU, GPU, GRAM and Monitor''s resources in the most efficient and effective way.

Keeping the relevant software updated also has an impact on graphics performance (grpahics Card Drivers, Java, Flash, DirectX, Video Codecs, etc.)

If the video resolution is set too high (or too low), beyond the graphics capabilities of the monitor, on reboot, the monitor will be unable to resolve the image.

The simplest solution would be to use a different monitor to adjust the video resolution, shut down then test the preferred monitor again.

Right Click on desktop>Properties>Settings then use the slider scale to adjust resolution, then Apply, Yes on the optimum setting, them OK.

Find the optimum setting in XP with your graphics card for this monitor and you should be fine.

Hope this helps.

Aug 02, 2011 | ASUS VH232H 23" Monitor

1 Answer

Lg driver download


If you're talking about using an LG TV as a computer monitor, the generic display driver will suffice. I've never seen any noticeable improvement on display or features when Windows displays the monitor correctly or as a generic. If your resolution is too low and you couldn't increase it, the problem is likely your resolution setting or video card driver, not your monitor driver.

Jul 18, 2011 | LG Computers & Internet

1 Answer

After installing the ASUS EAH5450 my computer turns on and runs fine on my desktop monitor. However, I've hooked up a HDMI cable to my Sharp Aquos and the tv says it's receiving an incompatible...


The easiest thing to try is change the screen resolution before connecting via HDMI. The process is a little different depending on what operating system you're using.
For Windows Vista/Windows 7: 1. Right click on your desktop and select "Screen Resolution" 2. Slide the bar to change the resolution to either 1024x768 or 1280x1024. 3. Click apply.
For Windows XP: 1. Right click on your desktop and select "Properties" 2. Click on the tab to the far right that says "Settings" 3. Under Screen Resolution, slide the bar to change the resolution to either 1024x768 or 1280x1024. 4. Click apply.
Either of these resolutions should at least give you picture when you reconnect with HDMI. Once you get a picture, repeat these steps and gradually move the slider higher to get a better resolution picture. If you receive the incompatible signal message again, just wait 15 seconds and the previous setting will be restored.
If this doesn't work, you may also have to adjust the screen refresh rate. From the same window that has the screen resolution adjustment bar, click the link or button that says "Advanced." The second tab, "Monitor," has a drop-down menu to adjust the screen refresh rate. Depending on your HDTV, the most common setting for this could be 60 Hz, 70 Hz, or 120 Hz. If none of those values work for you, you should check the manual that came with your TV to check what the proper resolution and refresh rate should be for your computer connection.

Jun 10, 2011 | ASUS EAH5450 SILENTDI1GD2 graphics adapter...

1 Answer

I just bought a top-end MacBook Air 13.3" 4 GB/256 GB for presentations. I also have a Dell M410HD projector, also quite new (a few months old), which works great with the two PCs (one new, one old)...


They (Apple) might be right. It could be that the projector is damaged, like the bulb, or it could be incompatible with your computer, but I don't think that is the case. Try taking the projector to a computer repair place.

May 17, 2011 | Apple MacBook Pro Notebook

1 Answer

Acer Monitor Display of text and image is not sharp


This might seem obvious, but is your video card output set to the native resolution on the monitor? If not, it will look fuzzy. Try 1680x1050, if you don't know the monitors native resolution.
No need to use anything higher than a 60hz refresh rate either.

Mar 29, 2008 | Acer AL2216WBD LCD Monitor

2 Answers

No image on screen when boot up computer


check vga cable! check also video card on the pc!

Aug 16, 2007 | LG Flatron L1710S 17" LCD Monitor

Not finding what you are looking for?
Sansui HDLCD-2200 22 in. LCD TV Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sansui Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sansui Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...