Question about Sentry Safe Dh-074e Solid Steel Depository Safe - Black

1 Answer

I want to change the combonation - Sentry Safe Dh-074e Solid Steel Depository Safe - Black

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 37 Answers

The SentrySafe electronic lock is shipped with a factory set master & manager code (777777). You should set the lock to your own unique master & manager code immediately.
Please keep your codes in a secure location. You may also register your codes on our website at www.sentrysafe.com.
A single signal (LED flashes and beeps once) response from the lock indicates valid entry.
A double signal (LED flashes and beeps twice) response from the lock indicates an invalid entry.
• If three incorrect entries are entered in a row, the keypad will shut down for a period of five minutes. During this shut down period you will not get a response from the keypad.
Changing the Master Code
(Code length: 1 to 10 digit code) Always perform this operation with the door open.
1. Enter: # - Existing Master Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: 1 - * - New Master Code - # - New Master Code - #, before the orange light disappears.
If a mistake is made during the change, wait thirty (30) seconds and repeat steps 1 thru 3.
Test the new code several times before closing the door: Enter: * - Code - #
• The lock will indicate a valid code change with a single signal.
• The lock will indicate an invalid code change with a double signal and the old code is still valid.
Changing the Manager Code
(Code length: 1 to 10 digit code) Always perform this operation with the door open.
1. Enter: # - Master Code or Manager Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: 2 - * - New Manger Code - # - New Manager Code - #, before the orange light disappears.
If a mistake is made during the change, wait thirty (30) seconds and repeat steps 1 thru 3.
Test the new code several times before closing the door: Enter: * - Code - #
• The lock will indicate a valid code change with a single signal.
• The lock will indicate an invalid code change with a double signal and the old code is still valid.
Activate user codes
(Code length: 1 to 10 digit code) Always perform this operation with the door open.
1. Enter: # - Master Code or Manager Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: User ID Number (3-7) - * - New User Code - # - New User Code - #, before the orange light disappears.
If a mistake is made during the activation, wait thirty (30) seconds and repeat steps 1 thru 3.
• The lock will indicate a valid code entry with a single signal.
• The lock will indicate an invalid code entry with a double signal and the old code is still valid.
Example: # - Master Code or Manger Code - # - 5 - * - New User Code - # - New User Code - #. This will activate User Five (5).
Changing the user code
Always perform this operation with the door open
1. Enter: # - User Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: New User Code - # - New User Code - #, before the orange light disappears.
If a mistake is made during the change, wait thirty (30) seconds and repeat steps 1 thru 3.
Test the new code several times before closing the door: Enter: * - Code - #
• The lock will indicate a valid code change with a single signal.
• The lock will indicate an invalid code change with a double signal and the old code is still valid.
The Master and Manager can also change the user codes by following the "Activate user codes" section steps 1 thru 3.
Deleting user codesAlways perform this operation with the door open.
1. Enter: # - Master Code or Manager Code - #
2. The set light will stay orange for ten (10) seconds.
3. Enter: User ID Number (3-7) - * - # - #
Programming your lock codes
2

Posted on Dec 18, 2012

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Projector is connected to an HP laptop. Once everything is plugged in and the projector is turned on, I turned on laptop as per the manual. The projector recognizes the device, shows the HP start up...


Press Fn + F4 keys, it will change output to external monitor.
Toggle keys to get needed combonation: projector only -> Projector+Laptop screen -> Laptop screen

Mar 09, 2011 | Dell 2300MP Multimedia Projector

1 Answer

TURN ON THE SET AND IT WILL SHUT OFF IN ABOUT 10 SEC.


You may find a bad capacitor near the powerline regulator. This powerline regulator will have an STR-XXXX number. And if that is not enough, you will surely have two or three resistors that have changed values. These combonation TVs are very, very difficult to keep operating. You may have a service person repair this....and then in a month the TV will act up again. This is good advice. You decide what to do next. Thanks for asking and show a few hands of support.

Jan 11, 2011 | Emerson EWC1303 13 in. TV/VCR Combo

1 Answer

Both low beam lights went out. high beams work. changed bulbs,checked fuses and relays


if all these other components checked out ok you need to replace the combonation switch/headlight switch

Oct 22, 2009 | 2003 Honda Pilot

1 Answer

How can i change the combo


Here's a free manual you can print out with complete installation and programming instructions you can keep for addressing any other concerns you might have in the future.

I thought this might be easier for you to work from, since you will have to reset the lock and enter in your new master code.

It is easy and straight forward to program and use.

http://www.smarthomeusa.com/Products/ED1460XXXX/manuals/WeiserLockPowerbolt1000-manual.pdf


By the way, both Kwik Set and Weiser electronic locksets were made by the Weiser Company and marketed under both brand names for years, until the company sold off the Kwik-Set brand. These instructions will work for your lock.

Hope you find this Very Helpful - Best regards!

Jul 26, 2009 | Kwikset 907 907-15 Satin Nickel Powerbolt...

2 Answers

Set a code


Go Menu> extras >screen lock > change combination  then turn screen lock on

Jul 21, 2008 | Apple iPod nano

1 Answer

Forgot my combination


TRY RESARTING IT!!!

Jan 18, 2008 | Apple iPod nano

1 Answer

Ipod


I put a combonation to my ipod and I can't unlock it can you help eeme find the combonation?

Jan 14, 2008 | Apple iPod nano

Not finding what you are looking for?
Sentry Safe Dh-074e Solid Steel Depository Safe - Black Logo

710 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sentry Home Security Experts

Hannah Johnson

Level 1 Expert

5 Answers

ray012965

Level 2 Expert

440 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Sentry Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...