Question about Shredder Secure Shred Shredder

1 Answer

Secure-Shred Machine runs but almost every paper stops half way through and then starts again

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Shredder Master
  • 55,370 Answers

Home paper shredders tend to accumulate bits of paper that have to be cleaned out from time to time. With power off, turn the shredding mechanism upside down and look for scraps or wadded up strips. Sometimes only tweezers and persistence will get rid of all.

Posted on Dec 18, 2012

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 102 Answers

SOURCE: Shredding paper partially

Your cutters have spread apart this could be caused by overloading machine to many times or something may have cracked internally that held them in place.

Posted on Feb 22, 2008

Anonymous

  • 58 Answers

SOURCE: need AC power cord


Contact Michael Business Machines for your local dealer 1-800-223-2508

Good luck, Tom

Posted on Mar 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My shredder runs non stop, when I insert paper to shred , it stops... I push reverse, it works , pull paper out and runs non stop.......


Sounds like a bad or stuck sensor, acting as if it is always seeing a peice of paper in it. Check if you can find it and maybe it is just stuck to the on position..

Nov 07, 2013 | Omnitech 10-Sheet Micro-Cut Shredder

1 Answer

Hello my nane is Tom. The shredder doesn't work. It will run in reverse but when I turn it to forward it run for a second or two than stops. I looked and I can't see anything jamed in it.


I got mine to work by running it on reverse for a moment then sliding it to auto. It stopped. Then I did it again. This time auto ran just for a second then stopped. I did it a third time but I had a sheet of paper ready in the feeder. Ran on reverse. Slid it to auto and it took the paper and shred it. I did it a fourth time. Reverse slide auto and feed shred the paper. Fifth time Auto shred the paper without reverse. :)

Aug 30, 2011 | Aurora Electronics AS662C Shredder

1 Answer

Royal 85x paper shredder: The shredder will start to shred but stops shortly after "grabbing" the paper. In order to get it shredding again, I have to put the machine in reverse, remove the...


Sometimes spraying shredder oil on the cutting teeth wil work.

You should shred paper with a light weight machine oil poured on the paper to keep the cutting teeth working freely.

Good luck.

P.S. If this doesn't work then just take the head off and cleanj/lubricate any bearings you find.

Mar 23, 2011 | Royal 85X Shredder

1 Answer

Machine won't shred. Does turn on, and goes in


You dont say make or model so...get some shredder oil into the cutting teeth where you insert the paper...especially if its a x-cut shredder..make sure once in a while you shred a piece of paper with some of the oil poured onto the paper for lubrication of the cutting blades.

Mar 04, 2010 | Office Equipment & Supplies

1 Answer

PowerShred C-220 will not shred automatically


OK lets try.
You likely have a photo sensor that detects the paper and it is dirty.
It is likely covered with paper dust (hopefully only on the outside)
Locate the sensor and wipe it off or just wipe the entire throat area.
WITH MACHINE OFF
Hope this helps

Dec 05, 2008 | Fellowes Powershred C-220 Strip-Cut...

2 Answers

Shredder stops in the middle of shredding and won't shred.


Is the paper bin full?....mine always shuts down when the paper bin is a little over half full.

Jan 21, 2008 | Fellowes 220 Powershred Strip-Cut Shredder...

1 Answer

Shredding paper partially


Your cutters have spread apart this could be caused by overloading machine to many times or something may have cracked internally that held them in place.

Jan 02, 2008 | Shredder Secure Shred Shredder

1 Answer

Shredding stops after 2 or 3 inches


If you have a strip cut machine it may be a problem with the gears. if it is not a strip cut it may be overheating due to not being oiled. First check with your manual to make sure you are not exceeding your duty cycle some machines only have a 2min on and 10 min off cycle,

Oct 20, 2007 | Fellowes P70CM Shredder

Not finding what you are looking for?
Shredder Secure Shred Shredder Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Shredder Office Equipment & Supplies Experts

Ross Keen

Level 3 Expert

1364 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you a Shredder Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...