Question about York Furnace Draft Inducer Blower Fasco # A224

1 Answer

York furnace 7 flashes - York Furnace Draft Inducer Blower Fasco # A224

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 7 Answers

If the light flashes red 7 times, the furnace is not sensing flame. Check for a flame sensing rod (small steel rod in the path of the main burner flame). If you can see it, shut off the furnace, and clean the rod with a rag soaked in vinegar. Turn the furnace back on and see if this cures yyour fault. Make sure you turn the power off to the furnace and then back on as this will reset the circuit board.

Posted on Jan 05, 2013

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code= two red flashes, lockout/ no flame


Trane XV80 hard lockout, 2 flashes, Can't be reset - DoItYourself ...

www.doityourself.com > ... > Gas and Oil Home Heating Furnaces
Jan 10, 2013 - The only way I can get diagnostic Red LED light to reset is to switch ... a2 flash with absolutely no operation from the furnace does seem to ..... inducer gets a demand you should get a pressure switch error code 3. ... the flame sensor wire and giving the furnace a heating demand after resetting power twice. Luxaire Furnace Blowing Cold - 8 Red LED Flashes
Mar 1, 2010
Winchester furnace diagnostics
Feb 14, 2010
American Standard Freedom 80 - Cold Air - Getting Error Code 9 ...
Nov 20, 2009
York ignition lockout due to retries
Dec 29, 2008
More results from www.doityourself.com

7 Tips and Tricks to repair your Furnace DIY - YouTube

? 13:25
https://www.youtube.com/watch?v=rAtcvPqUsBA
Dec 18, 2012 - Uploaded by JRESHOW .
cause this fault. 2 RED FLASHES: This indicates that thenormally open pressure ... The furnace will lock out for one hour and then restart. 7 RED FLASHES: This fault code indicates that the flame could not be established. This no-light ... problem. Bothheating and cooling operations will be affected. Check

Jan 23, 2016 | Heating & Cooling

1 Answer

5 u code is on how to fix it


Gas furnace fault or error codes for common furnaces - Gray ...

www.grayfurnaceman.com/-ifc-failure-codes.html
Here are error codes found on many York, Trane, Luxaire, Lennox, Carrier, ... If younotice 5 red colored flashes on your York Furnace, it signifies that your

Oct 03, 2015 | Cars & Trucks

1 Answer

York furnace code 7


The error 7 shows that the gas failed to ignite. That is because the sensor does not sense any flame. This can be because the sensor is dirty. You should look in the area of the jets for a wire that may be purple in color. It attaches to a bare metal probe that is shaped like the letter L This probe extends into the path of the flame from the jets. When it detects flame it tellls the controller that everything is good. When it gets sooty or dirty from use it cannot detect the small electric currents that are present. Clean it with scotchbrite. Error 7 means that the furnace is locked out and wont restart for an hour. You can shut the power off and turn it back on to reset it.

Feb 26, 2014 | Tools & Hardware - Others

1 Answer

Does a york diamond 80 furnace have a pilot light?


There is a diagnostic code flashed from a window in front panel of the furnace. What is it? From your description, I would bet on the ignitor as faulty. The vidoe shows this repair. Don't remove elements and sand them as this fixer did. it is destructive in many cases. York Diamond 80 furnace troubleshooting won start won light flame sensor...

Mar 08, 2018 | Heating & Cooling

1 Answer

York "high Aux or spill limit switch open"


how can I fix the spill limit switch, also how do I found it

Mar 05, 2010 | York Furnace Draft Inducer Blower Fasco #...

1 Answer

York furnace model p2mpd12h06401f flashes 4 times for trouble code does'nt have code list inductor motor comes on but ignitor does'nt come on


Check pressure switch for inducer motor. If switch closes, check for crack in ignitor. If gas valve opens and you can hear/smell gas, the ignitor is bad probably. If pressure switch isn't closed you need to check for blocked vent/chimney/heatexchangers.

Dec 18, 2009 | York Furnace Draft Inducer Blower Fasco #...

4 Answers

York 92 % eff. furnace shuts down on # 3 error (pressure switch)


i have fixed almost every one of pc9 -----we have installed in our company,code three{flashes} at first new presure switches installed, same thing,york knows about this,induction motor bearings,could be bad.our local york dist, has boards,inducer, ***.motor, dual press.switch,free.as is known as the only way to fix.after all else is ruled out.one local competator called us if we wanted to join class action suit . good luck.furnaces work good at first, season or two then bam

Nov 28, 2009 | York Furnace Draft Inducer Blower Fasco #...

1 Answer

York diamond 80 hvac blower and comp wont start on automatic


Need blower motor for York Diamond 80 Furnace I am in St Louis MO where can i get one

Jun 20, 2009 | York Furnace Draft Inducer Blower Fasco #...

Not finding what you are looking for?
York  Furnace Draft Inducer Blower Fasco # A224 Logo

1,247 people viewed this question

Ask a Question

Usually answered in minutes!

Top York Tools & Hardware - Others Experts

Brad Brown

Level 3 Expert

18157 Answers

Bob Janelli

Level 1 Expert

26 Answers

djbilo

Level 2 Expert

84 Answers

Are you a York Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...