Question about Magimix 5100 Cuisine Systeme Food Processor

Open Question

Magimix pulse button sticking, how do I clean it

When we press the pulse button on our Magimix it is beginning to stick and make it hard to turn off. Is there a way to clean it?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 11 Answers

SOURCE: magimix sytem cuisine

How to Change a Magimix Food processor plastic spindle.

This is meant as a guide only BBS ltd takes no responsibility for any damage done. We always advise that this should be done by a Magimix approved service agent.


The spindle is the part that sticks out of the motor this drives the blades, knifes, discs and cones for the food processor, this part may become worn after time or use.


Cover the main body with a cloth so as not to damage the look of the food processing machine.

Place two blocks of wood about 10cms either side of spindle cover. Then place two flat screwdrivers Horizontal either side of Magimix food processor spindle

Push down on handle of screwdrivers apply even pressure (keeping eyes well away from the spindle cover, they can fly off fast sometimes.)
The spindle will rise.


This will leave the metal centre shaft, Replace with a spindle cover bought from
www.magimix-spares.co.uk. Make sure you choose correct model, usually named on front of machine, or phone 01252 727755 for help.

When replacing, make sure that the New Food processor spindle is lined up and slide the spindle onto the centre shaft. Make sure this goes all the way down by gently tapping with a hammer.



All blades and attachments should be checked before placing back onto spindle cover, if the inside is damaged, this could damage the spindle cover again, any blade, dough blade , disc support that is marked should be replaced.

BBS Limited is the approved and dedicated supplier of Magimix parts & accessories for all Magimix products.
Please telephone +44 (0) 1252 727755 or fax +44 (0) 1252 727766 for help or advice. All images and text are Copyright (c) 2008 BBS Limited.

Posted on Aug 31, 2008

Ad
ThaMp3Doctor

Corey Knoettgen

  • 8596 Answers

SOURCE: magimix Cusine System

Here is the generic English Magimix manual - it covers a lot of different model numbers. The good news about this manual is that it is picture-intensive instead of word-intensive. The key is that every piece of the bowl must be in the correct position, or the food processor won't tunr on. Hope it helps:
http://www.magimix.com/upload/usa/download.pdf

-Tha mp3 Doctor

Posted on Mar 12, 2009

Anonymous

  • 1 Answer

SOURCE: Magimix blade is stuck

You need to replace the spindle i'm afraid which gets worn after a time. There a UK company that sells replacements and tells you how to replace it. Not a big job though a bit tricky. magimixspares.com

Posted on Jul 04, 2009

Anonymous

  • 175 Answers

SOURCE: im looking for the user manual for a magimix 3100

Hi,

Try to visit THIS link, hope this will help u.


Regards;
Hasan

Posted on Dec 27, 2009

Testimonial: "thank you"

caroldon

Donald DCruz

  • 17130 Answers

SOURCE: dead motor in Magimix Cuisine 5100

Remove and check if there is any fault of a brush contact or switch contact or if the load trip switch had reset.
If the power is coming to the motor and is not running you need to confirm fully if the windings are open , if so replace motor.
if not remove and reset the setting of the brush/commutator.

Posted on Sep 24, 2010

Testimonial: "A good simple test to perform, and optimism about a solution either way - thanks very much!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have used my magimix only three times since purchasing it in May. Today it will not work? I think there is something wrong with the motor, can this be?


Almost certainly the bowl and lid at not locked in the correct place. There is a button in the base and a rod in the handle that is pressed by a wedge on the lid. That presses the safety interlock button down into the base section. I have fallen foul of this and I am a professional chef :>)

Jun 23, 2018 | Magimix Food Processors

1 Answer

Hi my magimix 320xl won’t turn on the Handel clicks in ok so I’m not sure what the problem is it’s only been used a couple of times hope you can help me thank you Christine


Magimix is the best name in foods processors. They are very reliable with a direct drive motor. As I am sure you know that have a safety interlock, and this may be what is giving you the problem. The bowl has to be locked in place with the handle over the interlock button in the base. This is with the handle dead centre of the front of the machine. It won't work if you decide the handle would be better off at the side of the machine. Then the lid has to be locked in place with the lug in the slot in the top of the bowl. Only then will the machine operate.

If all that checks out, then you will need a service centre.
magimix service agent Google Search

The instruction manual is accessed from here

http://www.magimix.com/usa/page/Instructions-for-use

Dec 10, 2017 | Magimix Food Processors

2 Answers

Cleaning magimix handle


Magimix Food Processor and Bad Customer Service

fussfreeflavours.com/the-tale-of-the-magimix-and-bad-customer-service/
Jan 12, 2012 - Magimix food processor review - the exorbitant cost of replacement ...time to find out how to clean the internal part of my Magimix 5200 handle.

magimix compact clean handle Questions & Answers - Fixya

www.fixya.com > Forum > Tags
Find solutions to your magimix compact clean handle question. Get free help, tips & support from top experts on magimix compact clean handle related issues.

Food processor - Magimix

www.magimix.uk.com/page/faq/Food-processor/CS-5200-XL/
Magimix UK : FAQ Frenquently asked questions - Food processor. ... direction until the locking tab engages the top of the bowl handle. ... Never exceed the quantities recommended for your food processor model in the instructions for use.

Amazon.co.uk: Customer Discussions: Food processor bowl to


Jan 01, 2016 | Magimix Food Processors

1 Answer

What tool is needed to undo the four screws below the Magimix. I need to remove and clean the buttons which won't depress and sticky due to an overflow of mixture. Thank you


you did not described the screw or model of your machine, most of them use "secure" screw system of various shape, you need to check what shape is your particular screw and then go to closest hardware store and buy set containing that particular screw,

magimix use mostly torx screws, but you need to check as this vary from country to country... just to make our life more difficult...

Feb 08, 2015 | Magimix Food Processors

1 Answer

The Magimix makes a terrible (loud and harsh but short) clicking sound when turned on, either regular or pulse. It sounds ok when running and performs its functions as usual. This is happening ever since I...


you might have damaged the gear-train, Depending on what you payed for this unit it might be best to put up with it for as long as you can and purchase a new one when it brakes down

cost of repairs can easly equal or exeed the cost of a new unit with warenty

Best regards Falco

Nov 04, 2013 | Magimix 18527 5200 Food Processor, Chrome

1 Answer

I just bought a new 3200xl magimix and it not working


I had this problem. I fixed it by turning the bowl to face the opposite way.

There is a little plastic button - the handle has to be over this.

Jun 11, 2012 | Magimix 3200 Food Processor

1 Answer

Magimix 3500 motor or switch problem?


Hi, answer came up on howtomendit.com. It needs new PCB.

Nov 02, 2009 | Food Processors

1 Answer

I have a small Cuisinart food processor and I cannot figure out how to turn it on. It has two levers low and high. I have it plugged in and the lid on? Please help. Fiona Slattery 858-752-8591


Hi,

Your PowerBlend Duet™ comes with a food processor button. This button is the perfect speed for all your food processing tasks. Always use this speed when using the food processor. You may also use the Pulse button with this function for pulse-chopping.
To use your food processor, make sure that the bowl is assembled properly and the blade or slicing/shredding disc and the cover are locked into place.
When you use the control panel, the LED will light next to each button you press.
Press the On button. For continuous operation, press the Food Processor button. Motor will start if you have followed assembly instructions.
To turn motor off, press the Food Processor button again or the Off button.
For on/off operation, called pulse-chopping or pulsing, press the On button, press the Pulse button, and then press and release the
Food Processor button the desired number of times. Motor runs as long as you hold the Food Processor button down. The motor stops when you release control switch. Try it a few times.
You control the duration and frequency of pulses by the length of time you hold the Food Processor button down and the rate at which you press it. Pulses should be short bursts. Allow enough time between pulses to let food in work bowl fall to bottom.
Always use the Food Processor button for pulse/chopping. Never turn cover back and forth to start and stop processor.

You can download manual from the below link

http://www.cuisinart.com/share/pdf/manuals/bfp-10ch.pdf

ENJOY! RATE THIS SOLUTION
RNJ VINOD KUMAR

Sep 12, 2009 | Cuisinart Food Processors

1 Answer

Magimix blade is stuck


You need to replace the spindle i'm afraid which gets worn after a time. There a UK company that sells replacements and tells you how to replace it. Not a big job though a bit tricky. magimixspares.com

Jun 28, 2009 | Magimix 5100 Cuisine Systeme Food...

2 Answers

Need to fit new switch assembly


Only two screws ?? this must be an older magimix 5000 machine, does the replacement part have a 10mm frame around or flush, the part you need is click here http://www.magimix-spares.co.uk/On-Off-Pulse-switch-with-frame-5000---5100-Chrome/product/101296/

Sep 15, 2008 | Magimix 5150 Food Processor

Not finding what you are looking for?
Magimix 5100 Cuisine Systeme Food Processor Logo

Related Topics:

351 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magimix Food Processors Experts

Ross Keen

Level 3 Expert

1361 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

29402 Answers

Ruth summersides

Level 3 Expert

1477 Answers

Are you a Magimix Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...