Question about Motorola Mag One BPR40 Two Way Radio
I have three radios. One recieves from the other two, but cannot send to the other two. The other two cannot receive. Any suggestions. I am about to clone them to the other radios we have, but don't want to mess something up.
Check your PL/DPL settings among the radios. You may not have them programmed the same as one another. PL (aka private line) blocks out other users who do not have the same code as one another. Your radio which receives could be set with no PL code and it receives and hears every thing, so it would hear the other two, but not talk to them if they have a PL code setting.
Another way to check this is typically the dealer who programmed them will have the side button directly under the PTT programmed for Monitor. If you press this button a short press you should temporarily go into "open squelch" and you would be able to hear everything on your frequency. Try pressing this button on one of your "two" radios and see if they can hear the "one" radio. If so, you know it is a programming issue. (provided the button is programmed to Monitor). If pressing the Monitor button does not allow temporary communication, you have another issue.
If the green light on the radio seems to come on and stay on continuously, the radio is in need of repair. (Average flat rate repair on tehese BPR40s are around $79 currently at many repair centers.)
Posted on Jan 19, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
A couple of thoughts:
1) Check the mic hole and see if it is covered or clogged with debris.
2) Does your PTT button seem hard or the opposite, mushy? You could have an internal PTT issue. The PTT is a common failure part on 2-way radios. Feel around for the 'sweet' spot and see if you can make a simple or partial transmission, or if it will even momentarily open up the receiver on the other unit. If so, your radio is in need of repair. It would likely need a new internal PTT. (At most repair centers where the BPR40 is repaired the flat rate repair currently are around $69 for the BPR40)
3) Has any reprogramming been recently done on the radio? If so, double check the programming to be sure your PL/DPL code is set the same as your other radio.\
4) Check your battery. Trade batteries with the other unit and see if the problem changes. It takes more energy to transmit than to receive.
Posted on Jun 16, 2011
Tips for a great answer:
Jul 08, 2015 | Motorola Radio Communications
Sep 01, 2013 | Motorola Mag One Bpr40 Uhf 4w 8 Channel...
Sep 01, 2013 | Motorola Mag One BPR40 Two Way Radio
Apr 15, 2013 | Motorola CP200 Two Way Radio
Dec 29, 2012 | Radio Communications
Jul 12, 2012 | Motorola Mag One BPR40 Two Way Radio
Aug 01, 2011 | Motorola Mag One BPR40 Two Way Radio
Jun 15, 2011 | Motorola Mag One BPR40 Two Way Radio
Mar 24, 2009 | Radio Communications
1,012 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: