Question about Whirlpool RBD305PD Electric Double Oven

1 Answer

Whirlpool Double Oven RBD305 Display doesn't show, oven wont work

We have a Whirlpool electric double oven model # RBD305PD. Out of the blue, it started to beep and there is no digital display on the control panel. The light function works and it sounds like it is firing up when you press the Bake button & it warms up & locks. Then when you push the oven off it unlocks & then nothing. All this time there is no digital display. We tried turning off the breakers for a while, it didn't work. Then we turned off the breakers over night & it worked again. This happed on Christmas Eve 2008, now on January 26, 2009 it did the same thing. I tried the breakers again didn't work, so I tried the breakers over night & still didn't work.

Posted by on

  • Anonymous Feb 07, 2009

    I have the same problem, except my oven will occasionally show the E6/F2 error code. It constantly beeps and the display goes from blank to the error codes. Occasionally we can press start and the oven will turn on normally. But, more often than not, the oven will just beep when you try to turn it on. We replaced the keypad assembly. The oven worked for a short time, and then it was back to the same. We then removed the circuit board. It looked as though a resistor was burned out and some of the soldering had let loose. I think the soldering used on the circuit board was not made for high temperatures. I've done several internet searches on this model of oven and this seems to be a very common problem. I'm going to replace the control board, but I'm also going to write to Whirlpool and let them know that the oven is defective.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 167 Answers

Most definitely a bad control board and/or soldered components. (The part about cutting power to the oven was a dead giveaway)
There are low and high temperature solders, but usually solder melts at 370° F. If the oven is improperly insulated or ventilated you will have continued heat stress to the control board.

Posted on Mar 31, 2017

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Whirlpool electric double oven #RBD305PDQ14 control panel blank

The control panel part on my Whirlpool double oven (part #8302319) went blank six months back. Replaced it. Asked if there was a warranty on the part, was told no there was not. Yesterday, the six month old control panel went blank. Disappointed that Whirlpool manufactures such garbage.

Posted on Feb 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to remove door. picture does not look like the rbd305 we have


These ovens require that you remove the whole side covering to get to the hinges and door hardware.

Oct 21, 2013 | Whirlpool RBD305PD Electric Double Oven

1 Answer

Display went out on my whirlpool RBD305 oven and then it stopped working


You will need to replace the control board. Here is the part to order.



The part comes with a 365 day, any part, any reason return policy.

Nov 20, 2012 | Whirlpool RBD305PD Electric Double Oven

1 Answer

What are the electrical specs for model RBD305 Double Oven


All the information for that is usually located on the tag where the model and serial number are at. Electrical specs are 220v a/c 60hz. I can't recall the amperage. If you don't have the owners manual you can go to www.apdepot.com and get one

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jason_4570d45317834dd3

Apr 27, 2012 | Whirlpool RBD305PD Electric Double Oven

2 Answers

No heat! Lights work, timer etc - everything "appears" to be working but there is no heat!


Probably your heating element has failed, dependant on appliance the element can be found in the oven itself at the back behind a panel that normally has a couple of screws holding the panel in place. reasonably easy to fit yourself and not very costly.

Hope this helps

Apr 01, 2010 | Whirlpool RBD305PD Electric Double Oven

1 Answer

Oven does not work,no display.


the display board itself would be the culprit,the part might be under warranty,if under 5 years consult manual or manufacturer for coverage....the part is probably expensive

Mar 06, 2010 | Whirlpool RBD305PD Electric Double Oven

1 Answer

Whirlpool electric double oven #RBD305PDQ14 control panel blank


I suspect a poor connection at the wiring to the EOC is the cause of the failures.

Apr 21, 2017 | Whirlpool RBD305PD Electric Double Oven

1 Answer

Whirlpool Gold Series double oven electric model GBD307-PDQ309


Usually this is a touchpad and control panel fault but the only way to know for sure is to do some electrical testing with a volt/ohm meter and the wiring diagram located within the appliance.

With the model number of the oven we could look up the code and be more specific about the problem.


Go here for: http://www.repairclinic.com/Whirlpool-Range-Stove-Oven-Parts

RepairClinic.com

asplogo.jpg?ver=23
appliance parts, help & more

Apr 09, 2009 | Whirlpool RBD305PD Electric Double Oven

2 Answers

Whirlpool RBD305PD has error F2E6 error on control panel


When this code appears and display is going blank too, it is always the control board. The only option is to buy a new one or get it repaired. It can be fixed quickly and reliably. www.fixyourboard.com

Apr 02, 2009 | Whirlpool RBD305PD Electric Double Oven

1 Answer

Whirlpool double oven display is off


The only repair is to replace the ERC (clock).
Sorry.

Mar 27, 2009 | Whirlpool RBD305PD Electric Double Oven

Not finding what you are looking for?
Whirlpool RBD305PD Electric Double Oven Logo

Related Topics:

638 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...