Question about Philips 32PT71B 32" TV

1 Answer

Sound problems I have a Phillips 32pt71b, for the past 3 months the sound would just be loud static and then stop. Well about a month ago it started to get longer and louder and after a couple of hours of watching it, it just completely became all loud static. We will turn the volume up and down and mute it and it will still be loud static. Can anyone help me with a solution for this? Thanks!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have had the identical problem from the beginning. It happens in humid weather. Unplug the set while it's on, wait a second, plug it back in, and turn it on. Sound should be fine.

Posted on Jul 24, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phillips 47pfl7403d/f7 picture goes dark and then out completely


Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Apr 24, 2017 | Televison & Video

1 Answer

Buick 97 LeSabre hard start and acceleration issues


Have you checked the catalytic converter? After 20 years they do pug up causing some of the problems you describe

Apr 09, 2017 | 1997 Buick LeSabre

1 Answer

There is persistent low volume humming sound coming through all the speakers when the reciever is on, it is just loud enough to interfere with the audio I'm trying to listen too (especially dialog on the...


You could have done a very slow damage to the Yamaha if your UPS was not a pure sine wave type ( on line UPS ). Most of the UPS we get are called Off line type and are far cheaper than the On line pure sine wave type. The out put of the Off line type UPS is not a sine wave ( the natural waveform of AC voltage ) and strains the Power supply circuit of any device connected to it.
Now if the humming sound is the same irrespective of the volume position, it is a power supply problem. You might be having a leaky rectifier diode or capacitor. First change the diodes and see if its ok then change the main filter capacitors too.

Apr 28, 2011 | Yamaha RX-V663 Receiver

1 Answer

As soon as the toshiba a200 boots up there is a loud static noise in the speakers.It does not stop making the noise. The problem started 2 months ago when adding an audio file into powerpoint


you should check the configuration of the microphone and see if the volume is very high which leads to feedback with the speakers and produces the squeak

May 24, 2010 | Toshiba Satellite A200-0ET00X Notebook

1 Answer

Xbox 360 pro is not working at all. No video, no


Your console needs new heatsink paste applying to the grahics processor unit(gpu) this is basically the same as rrod repair so there are plenty of guides on how to do this,but you may have to do this every couple of months or so, the best solution is to have a professional re-flow this will be a much more durable repair if you don't want to do it yourself.
please vote if this helps.

Jan 25, 2010 | Microsoft Xbox 360 Console

1 Answer

No picture or sound


Hi, your color wheel needs to be replaced, the bearings fail causing the grinding noise, the new ones use "air bearings" so they are supposed to last much longer, video-tek

Mar 26, 2009 | Samsung HLR5067WX 50" Rear Projection HDTV

3 Answers

Making Loud noises


Got the same problem with my second TX-S3082WH Slimfit...the first had the same problem...it was deemed unrepairable and I was advised to return it to Circuit City...now a year and five months later Samsung support has been less than helpful as I am 5 months out of warranty...don't know what I'm going to do...any advice would be appreciated

Dec 02, 2007 | Samsung TXR3079 TV

1 Answer

Loud noise in freezer


maybe it has had it time! worn out! or ye could get someone to look at it!

Oct 16, 2007 | Refrigerators

Not finding what you are looking for?
Philips 32PT71B 32" TV Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76173 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...