Question about KitchenAid K45SS Classic Stand Mixer

Open Question

Have a K5A Hobart mixer, need parts, any vendors out there?

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: Kitchenaid K5A mixer 10 speed only runs on fast, no slow speed

Pull the back off and there will be two screws at the top of the Speed Control Plate and a 3rd screw at the bottom. Tighten the top two screws down. bakerboy49203@yahoo.com. Let me know if it works.

Posted on Mar 21, 2009

Ad
jkleyden

jkleyden

  • 21 Answers

SOURCE: Which is the better mixer of these old models: K5A

The major difference besides the bowl capacity is that the K45 is a tilt head mixer and the K5-A is a bowl lift style mixer. Both are good units but some people have found that the bowl lift mixers will not fit underneath the kitchen cabinets as it is much taller.

Posted on Dec 09, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My wife has a K5A mixer from the '70's that she loves. While I was checking the brushes, I over-tightened the brush cap and broke the threaded part it screws into. Can I get a new part?


The Brush holder caps / covers for the K5 series whether Hobart or Kitchenaid by Whirlpool (after 1986 when Whirlpool bought Kitchenaid from Hobart) will fit the K5-A they just wont be flush like the older Hobart caps. They come in black or white.

Jan 10, 2012 | KitchenAid K5SS Heavy Duty Commercial...

2 Answers

Hobart mixer


hi Gassman, below you will be able to find a link on parts assembly for the mixer, you will have an idea on how to tear off the parts, get them cleaned and place them back, like a regular maintenance.

Hobart A200 Mixer Parts Assembly

More parts assembly for Hobart A200 Mixer

hope this helps.

fb3484b.jpg

Aug 19, 2008 | Hobart A200 Stand Mixer

3 Answers

Which is the better mixer of these old models: K5A K5-A or K45 SS and what is the difference? KITCHENAID HOBART K5A K5-A 300 WATT MIXER and the KitchenAid Hobart Vintage K45 250 WATT. Thank you


Hello ajlina,

All of these are great home use units, all the attachments are interchangeable between these. The difference between these mixers is the K5 is a 5 quart mixer and the K45 is a 4.5 quart mixer. As I own both of them they are great in the kitchen and have the same durability.

Have any more questions please post to this thread and I will be happy to assist. Thank you for using FixYa.

Dec 09, 2010 | KitchenAid K45SS Classic Stand Mixer

1 Answer

How do i put back togeather Hobart 300-d mixer


http://www.hobartservice.com/Parts/

Go to this page and click on Hobart Smartparts System. Select Food Machines, Floor Mixers, D300 and you will eventually find parts breakdowns.

Feb 25, 2010 | Hobart D300 Stand Mixer

2 Answers

I need diagram of gearbox for Hobart d330 mixer


Parts manuals are available for viewing and free download at www.hobartservice.com

Dec 23, 2009 | Hobart D300 Stand Mixer

2 Answers

I suspect my D300T Hobart Mixer has a broken shaft I Need a parts/manual listing to help me take apart mixer, retreive broken parts and then order required parts


Hi. Go to hobartservice.com, register for free. This will allow you access to the parts files for your D300T mixer. Download them. When you begin your disassembly, take a photo of every piece that you remove, lay these pieces on a piece of cardboard or something suitable in the order that they were removed. This will help you greatly with your project. Good luck! ricardok45

May 12, 2009 | Hobart D300 Stand Mixer

3 Answers

Oil change for hobart h-600 mixer


Needed to know which part to open up to add or change oil on Hobart Mixer h-600

Mar 05, 2009 | Hobart H600 Stand Mixer

1 Answer

Hobart A200 Mixer not working


Sundance,
Please visit the corp website www.hobartcorp.com and click on the "Sign In" link in the upper right hand corner. You'll need to complete a brief registration form, but then you'll land in the Hobart Resource Center.

Hobart no longer manufactures the A200 mixer - but you can review and download a user manual and a parts catalog from the Resource Center on your mixer. That should help you understand the parts need.

We do sell replacement parts direct to end users, just visit our service website at www.hobartservice.com - and click on the "Locate on Office" link. You'll be able to contact your local Service branch to purchase a replacement part OR to have them take a look at the unit and provide a quote on fixing it.

If you have additional questions on Hobart products - please contact me at sherri.wilmoth@hobartcorp.com .

Thanks!
SHerri

Oct 11, 2008 | Hobart A200 Stand Mixer

1 Answer

Hobart mixer


Please be more specific of what part you need.Whats the problem with the mixer?Im a hobart tech and service these mixers often.

Feb 18, 2008 | Hobart A200 Stand Mixer

4 Answers

Disassembling the mixer


does the plug run through the base or the back of the unit?

Jun 10, 2007 | KitchenAid K5SS Heavy Duty Commercial...

Not finding what you are looking for?
KitchenAid K45SS Classic Stand Mixer Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

189 Answers

CJ C
CJ C

Level 2 Expert

66 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...