Question about Danby DFF8802 Top Freezer Refrigerator

Open Question

Dff8200w timer problems - Danby DFF8802 Top Freezer Refrigerator

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The freezer section of our Danby DFF8200W freezes well. However, periodically the refrigerator section freezes everything in it with the temp control turned as low as it will turn for me. The dial does not...


Make sure you clean the backside of refrigerator at bottom from dust. Make sure you have the recommended clearance from wall. Also make sure the food in freezer and frige have clearance to allow air to circulate around food. Keep playing with your controlls...The dails might be on wrong

Aug 11, 2013 | Danby Refrigerators

1 Answer

Noma se12 timer outdoor


Copy following link to help identify timer:
http://waterheatertimer.org/Woods-timers-and-manuals.html#outdoor

I test timers.
Commercial grade timers last many years.
Noma is a brand name apparently used by many different manufacturer's to package products, and might be the 2nd line timer from Woods.
Don't expect timer to last more than year or two... maybe 6 months.
Copy following link for general troubleshoot if you have timers fail frequently, it might be electrical problem:
http://waterheatertimer.org/Woods-timers-and-manuals.html#troubleshoot
Open links above, then add a comment and say which timer you have and what specific problem is encountered

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Jul 01, 2013 | Intermatic Malibu 121W Power Pack...

1 Answer

Have a first alert et220 timer. After setting it and turning back to current time, pm light goes out and clock does not run. Manual switch works fine


Timer is not identified for certain. Expert does not have instruction manual and can only guess at cause of problem.
For example not all timers are rated for CFL or halogen bulbs.
Loose light bulb filament, or loose light bulb, or dirt in light bulb socket can cause problem, replace light bulb.
Conflicts in timer programming can cause problem with digital timer.
Read more options listed below:

1) Add a comment and describe timer appearance and if timer is programmable or has a rotary dial.
Describe what buttons appear on timer.

2) Take photo of timer and post on flickr and add comment with link to that photo.

3) Scan your timer instructions into file format. Post this file to Flickr and then add a comment with link to those instructions.

Sep 09, 2011 | First Alert 24 Hour Timers - 2 For The...

1 Answer

Do I set the GE timer # 15089 to Auto on or Auto off for it to be activated. I had it on Auto on however the light stayed on all the time.


I don't have repair for defective timer.
Open following link to identify timer and download manual:
http://waterheatertimer.org/GE-timers-and-manuals.html#15089

Timer should be set to Auto ON for timer programs to run.
Auto OFF is temporary override, and timer resumes schedule at next set point.
ON is always ON
OFF is always OFF

If timer is not operating as expected:
Test outlet for correct polarity and electrical problems using cheap circuit analyzer from hardware store.
Timer programs can have conflicts. Make schedule before setting timer so there are no overlaps that cause timer not to function as expected.
Current time has not been set. Set current time including current day.
Set button has been accidentally pushed, and a number or CTD appear in display.
Timer needs to be reset to clear conflicting programming or error. Push reset button with paperclip and try programming again.
Timer is not able to handle intended load. All timers work for incandescent bulb. Connect timer to incandescent lamp and see if problem continues.
Timer is defective. Buy another timer from Home Depot and return defect in new package.

Aug 17, 2011 | Jasco Ge 7 Day Digital Timer 1 Outlet...

1 Answer

Model 57882 9 station timer I did set up station 1 where do I begin in order to set up station 3


Question is not clear.
Do you have programming problem with the timer?
Or problem locating sprinkler heads?
Or a sprinkler valve problem?
Add a comment with detailed information.

Sprinkler timer turns ON-and-OFF.
Timer does not advance the sprinkler to next station. The sprinkler valve advances to next station when timer turns OFF.
For example, when timer turns ON, then station 1 starts watering.
Timer turns off, and then sprinkler valve automatically advances to station 2.
Timer turns on again, and station 2 starts watering.

Orbit resources:
http://www.orbitonline.com/support/
http://www.orbitonline.com/lib/media/InstallationGuide.pdf
http://www.irrigationdirect.com/media/manuals/owners-manuals/orbit/Orbit-WaterMaster-57880-Controller-Owners-Manual.pdf

Aug 02, 2011 | Orbit 57882 9 Station Super Dial...

1 Answer

FIRST ALERT TIMER TYPE TM220


Timer is not identified. Web search does not show photo of timer.
Guessing you need help setting timer?

1) Open following link for 8 different photos of segments/pins that are located on dial of analog plug-in timers, and instructions how to set analog timers.
http://waterheatertimer.org/Woods-timers-and-manuals.html#troubleshoot

2) If information above does not include your timer, then look down the full page on link above and find same-similar timer with instructions. Add a comment at any time.

3) Also add a comment with in-focus photo of your timer posted on Flickr so expert can identify timer for sure. Then include exactly what problem you are experiencing and what you have done so far to fix problem.

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

May 16, 2011 | First Alert 24 Hour Timers - 2 For The...

1 Answer

Will not keep proper time & looses program after one cycle. I came home tonight @ 0030 & even after installing a new battery in & reprogaming it today ,it was showing 0630am when I got home .


You posted under a popular timer sold with GE, Westek, and Utilitec brand names:
Open following link to identify timer for sure.
http://waterheatertimer.org/Woods-timers-and-manuals.html#6-24

If you have different timer, hints below might apply.

1) I test timers, and some arrive defective, and some go bad within a year, but most last a few years.
2) To reset timer, unplug for several minutes, plug back in, and then re-program.
3) Move timer to plug on different circuit breaker and see if same problem occurs.
4) If you have another kind of timer in the house, move it to same plug as problem-timer and see if different timer also looses time.
5) Use circuit analyzer to check if circuit has problem. Circuit problems will affect timer electronics.
6) If timer is clean and new-looking: buy another one from Lowes or Home Depot or Target and then return defective one in new package.

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Mar 01, 2011 | Woods Outdoor 7 Day Digital Two Outlet...

1 Answer

Whirlpool washer will occasionally be filling with water and pumping water out, problem will last until i turn timer knob to next action, after turning timer to "sweet spot" washing machine will...


These timers are normally sealed units (crimped and pressed sheet metal) and replaced as a unit.
If you could open one up, you'd find
that the contacts causing the intermittent problem are burnt from arcing. All washing machine timers
will eventually get this problem with enough use. As an electrician, you'll recognize that all switches
(washing machine timers are a series of switches oriented around a slow (timer) motor) are rated
for a given number of make/break cycles. Washing machine timer contacts are no different.
If you could actually "shine up" the offending pair of burnt contacts, another pair would soon
show the same symptoms, since all the contacts in your timer have endured the same number of
make/break cycles.

Feb 21, 2011 | Washing Machines

1 Answer

Reset timer between batches of cookies


click the Hr/+ and the Min/- keys at the same time...the timer will reset.

Apr 27, 2009 | Taylor Dual Event Mechanical Timer, 00521

1 Answer

Lights continue to go off


Maybe the lights are causing photoelectric eye to sense that it's no longer dark.
This is called feedback.
To check this, set timer for 2 hours.
Put black tape over photoeye.
Check if timer turns on-and-off.

If timer continues to blink, then timer is suspect. Return it for another one.
If feedback is causing the problem, then turn timer away from lights or place obstruction between timer and lights.

Dec 10, 2008 | Intermatic Outdoor Timer/Photo Control...

Not finding what you are looking for?

Open Questions:

Danby DFF8802 Top Freezer Refrigerator Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Danby Refrigerators Experts

William Miller
William Miller

Level 3 Expert

9177 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Are you a Danby Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...