Question about Home Comfort HCWP1201 1.7 cu. ft. Portable Washing Machine With 12 lb

1 Answer

Home Comfort HCWP1201 Portable Washing Machine doesn't spin...

Fills with water, drains but doesn't spin. After few minutes of pomping water out shows e1 error code. I've tried set on spin only but is same thing - any ideas? Thanks

Posted by on

  • Maurycy Feb 18, 2013

    Belt is ok, pulleys are turning - i checked it. Everything is fine during a washing cycle - spins left and right, problem starts when washing machine goes to next step - rinse cycle. Popms out the water - this process takes more then usually and doesn't want to go to spin - shows e1 error code.... Thank you for your help.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 4 Answers

Sounds like the belt is either broken or slipped off,or the pulleys on the motor or basin are not turning. Most likely it will be the belt. If you can open the panel you should be able to see the problem. If it is the belt,you may find the part at any appliance shop and fix it yourself. If the pulleys are not turning the belt,there could be a few different reasons for this. You would have to look at them and find out why. They may be fixable but it would depend on the specific problem. If the machine is still under a warranty,it would be best to take it to the dealer.

Posted on Feb 18, 2013

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Washing Machines will not rinse or spin


If the water won't drain out of your washing machine, either something is stuck in the drain hose or pump, or the pump is broken. Both fixes are simple if you're even just a little bit handy with tools. We're showing the repair on a Maytag washing machine.
What is wrong with a washer that does not spin?
If your washer fills with water but doesn't agitate, the problem is likely to be a faulty lid switch, a broken belt, or a problem with the motor. (Note: Direct-drivewashing machines do not have belts.) To diagnose the problem, do the following: 1Check the washing machine's spin cycle.
How to Drain Washing Machine That Won Drain Family Handyman
Washer Doesnt Agitate or Spin
Error codes in front load washers
Washing Machine Not Rinsing How To Fix
My washing machine stops at Rinse Does not DRAIN or SPIN
What causes a washing machine not to drain and spin?
If the washer won't drain there might be a clogged pump or hose. It's common for small socks or other small clothing items to get into the water drain system and clog the hose leading to the pump or the pump itself. Remove the hoses from the pump in order to remove the article of clothing.
SOLVED Why won my washer spin or drain Kenmore 110 Series Washing Machine
Maytag Washing Machines will not rinse or spin Google Search

on Dec 12, 2017 | Washing Machines

1 Answer

Why wont my home comfort 1401 washer drain but not spin


There are many things that can stop it from spinning....but the
first place to check is the belt. Is it loose or broken?

Aug 17, 2014 | Home Comfort HCWP1201 1.7 cu. ft. Portable...

1 Answer

Broken belt for a hcwp1303


Where can i buy this belt Hcwp1303 v belt 0-462 e

Feb 19, 2014 | Home Comfort HCWP1201 1.7 cu. ft. Portable...

1 Answer

What is E3


E-3 is error When spinning system does not work , after taking out all water it try to spin,

Nov 17, 2013 | Home Comfort HCWP1201 1.7 cu. ft. Portable...

1 Answer

Washer fills with water but doesn't begin to agitate to wash. It also drains but doesn't spin when we set the dial to that


Your agitator pindle. has come loose From the spline. Try to lift up on the agitator. If it lifts off the spindle easily then it has worn out the spline. That is what connects the agitator to the s

Feb 06, 2013 | GE Profile WPRE6100G Top Load Washer

1 Answer

How to move around brandt wm 550


see this causes and fix it. God bless you
When the cycle doesn't advance, it's probably the timer or a cold-water supply problem: It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer. It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.

Sep 22, 2012 | Washing Machines

1 Answer

Beko WMP652W washing machine will start cycle but get stuck at end of wash, doesnt go onto rinse or spin any help please?


see the next steps and use the common sense: God bless you
When the cycle doesn't advance, it's probably the timer or a cold-water supply problem: It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer. It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.
8_2_2012_12_47_51_pm.gif

Aug 01, 2012 | Washing Machines

Not finding what you are looking for?
Home Comfort HCWP1201 1.7 cu. ft. Portable Washing Machine With 12 lb Logo

976 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Comfort Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Brad Brown

Level 3 Expert

18166 Answers

Are you a Home Comfort Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...