HP LASERJET PRO 400 MFP SHOWING INITIALIZING WHY?

6ya staff

• 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Manoj Rout

• 495 Answers

SOURCE: HP Color LaserJet CM1017 MFP - won't scan

Please try installing software components for your MFP device.

Posted on Feb 12, 2009

SOURCE: how to intalling network sanner HP LaserJet M1522nf MFP

Hi,
If your printer is connected in the Network and you are able to print fine than there is no communication Error.
In htan case if you are not able to scan then you need to upgrade the firmware of the printer and install it and i m sure your printer wiill scan scanning on the Network.
Mentioned below is the link to download the latest firmware of the printer.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3442750&prodNameId=3442754&swEnvOID=228&swLang=8&mode=2&taskId=135&swItem=ma-70811-2

However before you start sending firmware to the printer you need to make sure that printer driver is installed on the PC.

Thanks and Regards
Neeraj Sharma

Posted on Jul 01, 2009

SOURCE: scanner error 6

Problem for HP LaserJet M1120 MFP All-In-One Printer Scanner error 6

Posted on Jan 14, 2010

SOURCE: LaserJet M4345 MFP Printer: how to cold reset in HP LaserJet M4345 MFP...

walid_sayed@hotmail.com
To perform a cold reset
1 Turn the MFP off and then on.
2 When the memory count appears on the control-panel display, press and hold 6 until all three
LEDs flash once and then stay on. This might take up to 20 seconds.
3 Press 3 four times until COLD RESET appears on the control-panel display.
4 Press 6 one time. The MFP continues its initialization sequence.

Posted on May 07, 2010

SOURCE: error 79 hp laserjet m2727nf mfp; error 49 hp laserjet m2727nf mf

Bueno, el error 79 en mi caso se presentó con el servidor de impresion, tienes que limpiar los trabajos en cola y luego reiniciar la impresora.El error 49 indican que es con un problemas de fax o con scanear en Mac OS X, en todo caso hp support tiene los pasos a seguir.

Posted on Jul 26, 2010