Question about Cuisinart CBK-200 Bread Maker

1 Answer

The machine stops kneading in the middle of the program

I've had my Cuisinart bread maker for over a year, it worked GREAT until a few days ago. Now it stops kneading after 5 minutes into the program, but the program itself goes on (the arrow is still on "Knead", the time keeps ticking down and the mix-ins function beeps after a while, as if everything was working fine).

I've found that the program resumes when I press the pause button and then start again, but I have to keep my ear out and make sure the machine hasn't stopped kneading again...

Posted by on

  • Anonymous Feb 17, 2009

    I meant "I've found that the KNEADING resumes when I press the pause button and
    then start again"... Otherwise the program keeps running without kneading.

  • Anonymous May 21, 2009

    I have the same problem. Stops in the kneeding cycle after about 5 minutes or so, and will resume when I press the pause and start buttons.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 30 Answers

Even Replacement May Not Help for Long.
After my six month old CBK200 had the same stop and start malfunction I was sent a brand new replacement by the company. Three months later the new unit started doing the same thing. I am putting up with it for now, but as soon as I have a little more time, I will go back to the authorized repair depot and request another replacement and hope for the best.

Posted on Aug 17, 2009

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Lance Hill

  • 1739 Answers

SOURCE: My Toastmaster TBR2 bread machine does not knead

Make sure you are programming your machine correctly.

The Instruction Manual indicates three possible problems, none of which would seem to be your problem. Not plugged in, error message or kneading blade missing.

Suggest you review the Instruction Manual for programming your bread maker. Unplug your machine to reset and then plug in and program as directed.

TRB2 Instruction Manual:

http://dl.owneriq.net/4/4ae504be-4834-4845-a8f8-7a6df62c1033.pdf

Posted on Mar 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cuisinart bread maker..wheat cycle doesn't work...what can I do.. bread maker new does it pause before it starts to mix?


The wheat cycle on mine has a 30 minute preheat before it starts kneading. should show on the LCD screen

Feb 09, 2017 | Cuisinart Kitchen Appliances - Others

1 Answer

Cuisinart bread oven menu will not change


Plug your machine in and push the menu button again and again are the numbers changing from program to program? If not push the start/stop button with no ingredients in it and if it starts kneading wait a few seconds then push the start/stop button again UNTIL IT BEEPS AND STOPS. Unplug the machine and plug it in again and the program 1 should show again, just push the Menu button until you see the number 9 program. Did that work?

Dec 21, 2012 | Cuisinart CBK-100 2-lb. Bread Maker with...

1 Answer

A kind lady gave me a new Toastmaster bread machine 4 or 5 years ago, but my life was such that I thanked her, but said I didn't have time to devote to it. A year ago, I took it out and used it twice...


If you chose the "dough" program it won't get hot at all. If you chose the other programs and it never got hot then you do have a problem. Please advise which program you chose and we'll go from there.

Aug 12, 2011 | Toastmaster TBR2 Bread Maker

1 Answer

Our bread maker doesn't heat at all, it will make the bread then just turns off. We've had it for about a year, we've made 10 loafs, maybe. Those were some expensive loafs of bread :( Any...


Contact customerservice@cuisinart.com for a service center near you.

Otherwise, try to reboot your breadmaker's computer by plugging it in then pressing and holding the Stop/Pause button down for at least 3 seconds.

Hope this helped. ;)

Jun 10, 2011 | Cuisinart CBK-200 Bread Maker

1 Answer

The paddle for my Breadman BK1060BC has been coming off during kneading. Today, I saw some grey residue in the dough. Is the problem with the paddle, pan or both? Thanks.


I just purchased this 2 days ago and started to use it. I noticed the bread pan would wobble and was noisy during the kneading cycle. On the second use the paddle came off during the kneading cycle. Being a service technician all my life, I started to analyze the problem. I was previously surprised how loose the bread pan fitted into the bread maker and suspected there should be something to support the pan and hold it in place. I could not see anything obvious, but after looking carefully I noticed spring clips on the bottom of the bread pan, and also mating spring clips in the bottom of the bread maker. If I pushed the bread pan down fairly hard into the bread maker the bread pan would snap firmly in place. This stopped the wobbling during the kneading cycle and the paddle coming off. I could not find anywhere in the manual where it explained the bread pan must be pushed firmly down into place until it snaps in. The manufacturer should explain this to their customers on their website.

Apr 23, 2011 | Breadman TR2500BC Bread Maker

1 Answer

2 years old B&D bread machine. Motor doesn't turn. Didn't wait long enough to see if the heater is working.


Hi keneddy,
Always wait a few minutes to see if your bread machine start to mix after a few minutes. If the oven chamber is cold it will gently warm up a few minutes before it starts to knead/mix. This can sometimes take anywhere from 4-5 minutes and longer. If it doesn't start kneading after about 20 minutes then you do have a problem. Whole wheat programs often warm up before any kneading begins. All you will hear is a faint clicking noise while the heat comes on.

Feb 21, 2011 | Black & Decker B2300 Bread Machine

2 Answers

Clicking noise when on the knead cycle and the kneading paddle doesn't turn at all. I have only had the machine for 1 year and no longer have any receipts.


I am having the same problem. I just purchased my machine last week. I made regular white bread last week and it worked great, but today I tried to make whole wheat bread and it froze. Any solutions for this?

Jan 19, 2011 | Cuisinart CBK-200 Bread Maker

1 Answer

I bought my Cuisinart Bread Maker in February 2007 and it worked well until now. Yesterday I started to make Dough cycle. First 2 minutes machine kneaded the dough correctly as usual but suddenly...


check the underside of the basket. I have had problems with the lock washer, causing the wing nut to slip and not providing any turn to the shaft and paddle.

Sep 22, 2010 | Cuisinart CBK-200 Bread Maker

Not finding what you are looking for?
Cuisinart CBK-200 Bread Maker Logo

885 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cuisinart Kitchen Appliances - Others Experts

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Tom Chichester

Level 3 Expert

55370 Answers

Are you a Cuisinart Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...