Question about Sharp LC-26SH10U 26 in. LCD Television

2 Answers

Hdmi sound and picture

My maunal says to put my input on 4..i did...and nothing. no picture or sound when trying to use the hdmi hookup...the manual told me to hit the volume down while pressinf 9 on my remote but all that did was bring up a bunch of yellow dots that i didnt understand what they were for.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Sharp Master
  • 721 Answers

Are you sure that you are plugged in to an HDMI cord that your settings settings on the TV for because you see there's three HDMI ports

Posted on Mar 07, 2018

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Master
  • 768 Answers

After reading your post I can't understand what are you doing and what you expect to achieve

Posted on Mar 07, 2018

Ad

1 Suggested Answer

SD Tech

SD Tech

  • 14553 Answers

SOURCE: the remote doesnt work with the tv at all. and when i try to change the channel manually with the button it says no input availiable. but the volume button works just the channel button that doesnt. I

UNPLUG THE SET FOR A WHILE AND PLUG IT BACK IN TO SEE IF IT WILL REBOOT-sounds like a microprocessor problem and could have been caused by a power outage etc.

Posted on Apr 02, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Want to see dvd hookup for model#ln32b360c5dxza want to .Picturepicture of back of tv


Hi,

See this link for the manual - looks like the hookup diagram is on page 6:

http://www.manualslib.com/products/Samsung-Ln32b360c5dxza-2824887.html

Feb 08, 2015 | Televison & Video

Tip

DVD PLAYER to TV HOOKUP


57b6c82.jpg

Basic DVD player hookup to TV cable diagram. RCA cable (yellow) video and RCA cables (white and red) audio. This is all you need for picture and sound. If your TV only has a single RF input, then you need a RF modulator. RF modulators accept the yellow, white and red cables and output a coaxial cable to the TV single input jack. Usually the TV is tuned to channel 3 or 4 to pickup the RF modulators output.

Alternative connection options are many and include HDMI for HDTVs, component video and for sound, surround sound digital audio connection using optical or coaxial digital audio cable.

Surround sound requires a decoder such as a A/V receiver with Dolby Digital 5.1 or DTS 5.1 or more. 6 speakers connected to the A/V receiver surrounds the listener.

Bluray players will play DVDs and Bluray discs. Bluray gives you High Definition video and typically connects to a HDTV using a HDMI cable.
dvd_howtoconnect.htm
for more information and pictures on DVD player hookups.

on Aug 17, 2010 | Audio Players & Recorders

1 Answer

Can't see image with shaw pvr on toshiba 32hl57


I presume you followed the instructions in the TV manual during hookup and did not hook up with the units powered up and did select the correct input with the remote?

If you have another unit that uses HDMI try a direct hookup with it to see if the HDMI input is working.

HDMI units do not like being hooked up when units involved are powered up and on--seen more than a few where this was the problem and it is worth a try if the Owner Manual does not help you.

Apr 10, 2012 | Toshiba Televison & Video

1 Answer

Hi our PS3 has no sound or picture. It does have the green power light on.


What is probably happening, is your PS3 is set for the wrong type of output. If you are using an HDMI cord, try switching to the AV cables that came with your PS3, and set your TV at the appropriate input to correspond with the AV hookups, and see if the picture works then.
If you are using the AV cables, it may have been set to HDMI accidentally. You need to use an HDMI cord, and hook the PS3 up to an HDMI compatible TV or monitor, and select the HDMI input. Once you get the picture working, go to Settings>Display Settings and set the display you wish to use.

May 16, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

I hooked up the HDMI cable from the satilite to the satilite port and then the HDMI cable out to television. I have to have the samsung system on to get a picture. Is there another way to hookup so I don't...


if you have more then 1 hdmi on tv your box should have 2 u take and plug1 directly in to tv from box and keep it the same way and just change input on tv to hdmi 1 or 2 or 3 etc. most new tvs have 4 of them or let me know what box u have hope this helps ya

Jan 03, 2011 | Samsung HW-C560S Theater System

1 Answer

I still have sound but get no picture on my DVD player


Chances are, that as in the issue with no sound/picture post, the Tv is the issue...dont fret, just refer to owners manual of tv, and verify which component/hdmi/s-video hookup it is and make sure you choose appropriate one on TV input setup. for more information refer to post of no sound/picture.

Aug 02, 2010 | Coby DVD-937 5.1 Channel DVD...

1 Answer

Unit is turning on but no picture. just brought new


Trouble shoot: Make sure cables are in tight. and corrected to the correct tv input Test your HDMI cable on another device. (is it working) Make sure your TV is set to the correct input. Try another device on your TV's HDMI input.(working?) Try anolog hookup instead of HDMI (is that working)

Feb 07, 2010 | Sony Playstation 3 (PS3) Console

2 Answers

Need some sound to my home theatre system


Just 2feb827.jpgrun red and white composite audio cables from the audio out ports above the AVin1 ports on the back of the tv to one of the audio input ports on the home theater system, remember which input port you connected it to and when you want to watch tv with the home theater sound just switch to that input on the home theater system.

Feb 04, 2009 | LG 42LG50 42 in. LCD HDTV

1 Answer

How to hookup yamaha rx-v730 receiver to projector & cable unit.


hook up hdmi cable from cable box to receiver hdmi input 1 then from hdmi out to your projector or tv,i don't know what kind of inputs you have on your projector .whatever you have run from projector to receiver input example component red,blue,green then run from both say to the av input 1 then set your receiver to av1 and you should get picture.

Jan 25, 2009 | Yamaha RX-V730 Receiver

1 Answer

HDMI


Use the input button on your remote control... as you press input you should see VID 1, VID2, COMP 1, FRNT and then DVI... When you get to DVI you should see your picture..

Oct 15, 2007 | RCA P52926 52" Rear Projection Television

Not finding what you are looking for?
Sharp LC-26SH10U 26 in. LCD Television Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...