Question about Xerox WorkCentre XD100 All-In-One Laser Printer

1 Answer

H2 Blinking on the panel

I have a Xerox Workcentre 16fx that has been in storage for a while. I pulled it out and plugged it in. It powers up, but I have an H2 error flashing on the screen. Any ideas what that means?

Thanks!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Xerox Master
  • 4,338 Answers

Error code means that:
H2 Thermistor Open

Part #
Xerox Workcentre Pro 16FX, Xerox Workcentre XD100, Xerox Workcentre XD102, Xerox Workcentre XD103F, Xerox Workcentre XD104, Xerox Workcentre XD105F, Xerox Workcentre XD120F, Xerox XC1020, Xerox XC1040, Xerox XC820

Mfr Part #: RDTCT0128FCZZ


Xerox Workcentre Pro 16FX, Xerox Workcentre XD100, Xerox Workcentre XD102, Xerox Workcentre XD103F, Xerox Workcentre XD104, Xerox Workcentre XD105F, Xerox Workcentre XD120F

Mfr Part #: CTHM-0019DS52, CTHM-0019FC52

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Posted on Feb 21, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have problem that the printer spooler is not displaying in the service. and when i add the printer then one message displayed that "your printer spooler service is not start. so what am i do for...


Hi,

Go to Start > Run, type in "services.msc", go down on the list till you see "Print Spooler", double-click, then click Start.

This should fix your issue.

Jul 22, 2011 | Xerox WorkCentre Pro 16fx Laser Printer

1 Answer

-Xerox workcentre m20i. -Yesterday turned machine


hi enviro,

so its the supply inside the Xerox is the next to be checked or fuse too..a technician nearest you can help open it.

mastergani

Jan 21, 2011 | Xerox WorkCentre M20 Black and White...

2 Answers

LSU error in XEROX workcentre pe220. What is the


R/sir,
I have a Fax machine of Xerox make model PE220.From BSNL line connectivity is allways out of order.I want to connect FIXED CELLUR TERMINAL (FCT).After conecting machine give dial tone for outgoing calls.and other end caller received a fax tone on their machine when they want to make a call on my machine.But printer is not printing after some LCD diplayed a massage communication error.Kindly GUIDE me for change in settings.

Thanks and regards

PK Jain
(Pennywise)

Dec 15, 2010 | Xerox WorkCentre PE220 Series

1 Answer

Loud clicking from the manual paper feed? very loud..? xerox workcentere pro 16fx


When printing from the computer, Clicking starts from the printer before printing starts.

Aug 11, 2010 | Xerox WorkCentre XD120F Laser Printer

1 Answer

Error code 39,003,40;61256 on a xerox workcentre


Here is the easy solution to fix the issue :

Click on the link and follow instructions to fix the issue.

http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Dec 02, 2009 | Xerox WorkCentre C2424DN All-In-One Laser...

1 Answer

Xerox C2424 system error 0701043:29778


Try some cleaning to your Printer.......
also check for any stuck in the printer

Mar 19, 2009 | Xerox WorkCentre C2424DN All-In-One Laser...

1 Answer

Xerox Workcentre M201 says open heat error


Fuser Error, Open Heat
Error, Heating Error and
Overheat
There is a problem in the
fuser unit.
Unplug the power cord and plug it back in. If the
problem still persists, please call for service.

Dec 09, 2008 | Xerox WorkCentre M20i All-In-One Laser...

1 Answer

System error


7,0XX.6x Errors - Program Faults
a.
Reset NVRAM and retest.

Jul 02, 2008 | Xerox WorkCentre C2424DN All-In-One Laser...

1 Answer

Error mesage


NOTE: Some Status codes will not clear even though the problem has been fixed. Status codes that will not clear must be manually reset using the 'Fault Reset 14 Procedure'.
  1. Locate the [C] (Clear) button on the Control Panel, at the far right.
  2. Locate the Image Quality button, below the Auto on the Control Panel, toward the left side.
  3. Press the buttons in the following sequence within 4 seconds. Press [C] (Clear), press [Image Quality], press [C] (Clear) again, press [Image Quality] again.
  4. The error code should disappear. If the Status code does not clear, repeat step 3 until the status code clears; but no more than five times.
  5. Use the [10] and [1] buttons to enter 14 on the Display Screen, as if you were to make 14 copies.
  6. Press the [Start] button. The machine should be ready to use.
  7. Make a copy, to check that the machine is working properly
IF these steps do not work you will have to replace the fuser or fuser heat rod then perform the reset.

May 15, 2008 | Xerox WorkCentre Pro 16fx Laser Printer

Not finding what you are looking for?
Xerox WorkCentre XD100 All-In-One Laser Printer Logo

Related Topics:

748 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Philip Hughes

Level 2 Expert

80 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...