Question about Copystar Kyocera FS-1135 MFP/DP Multifunction Printer

1 Answer

Copystar Kyocera FS-1135 MFP waste toner full

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I can not find the screw razor is talking about.

Posted on Feb 21, 2015

Ad

5 Suggested Answers

Anonymous

  • 1 Answer

SOURCE: All the copies are coming out solid black

On my copier the exposure would light when I made copies but come to find out it wasn't bright enough. Look at the lamp and see if it doesn't have black burnt spots. If so then it is the lamp.

Good luck

Posted on Apr 12, 2009

Ad

Ray M.

  • 215 Answers

SOURCE: "waste toner is full"

pull out your drum unit. locate green tab on the right top of unit. now, take out one screw and remove small cover on the rear, right side and empty very carefully.

hth,
razors

Posted on Apr 17, 2009

Everett Lin

  • 990 Answers

SOURCE: ERROR CODE "C7980". I HAVE ALREADY EMPTIED THE TONER WASTE. WHAT DOES IT MEAN AND HOW DO I FIX IT?

Hello sir; The code you display which means waste toner bottle full, just dump it .

Posted on May 12, 2009

mysticus_tam

Tammie Duggan

  • 57 Answers

SOURCE: We have a 99 and

C7-99 is not a waste toner error code.

Posted on Dec 03, 2009

n25an

Norman Davis

  • 622 Answers

SOURCE: i need location of a waste toner in a copystar cs

i don't think it has one...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Posted on Dec 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I have an error code C7990 on a Kyocera FS-1028 MFP. Can someone help me on translation and fix of this error?


empty drum unit its full of waste toner each side of drum unit has plastic covers that pop off empty out the unit thoroughly and vacuum inside

Mar 11, 2017 | Kyocera FS-1028MFP Mono Multifunction...

1 Answer

Why i cannot send a fax from my kyocera ecosys fs-1135 mfp?


If you can receive but not send, maybe the number you are sending to should include some pauses, especially at the end of the number. If you have a good dial-tone when you do "On-Hook" then there is nothing preventing you from sending on the machine end. Has the phone system just gone digital? You may need a filter to translate pulses properly. Can you call your cell-phone using On-Hook dialing? I would say there's nothing wrong with the machine. But you'll get blamed for the communication problem in any case. Try manually dialing using On-Hook dialing (turn your Monitor sound up high) and listen for some kind of message. It's a number or line problem. Did they just start requiring an 8 or 9 to be prefix-dialed to get "out?" Or stop requiring it? Maybe there is a prefix number programmed through the default menus that you don't need anymore.

Sep 06, 2014 | Copystar Kyocera FS-1135 MFP/DP Printer

1 Answer

NOISES DURING COPYING


open rear cover and check the fuser to see if there is wear on the heat roller, if there is a line worn in the roller and it makes a grinding noise,
it will need the fuser replaced, also it may need a firmware update.

Apr 02, 2014 | Copystar Kyocera Fs-1135 Mfp Multifunction...

1 Answer

ERREUR MACHINE CODE C7990


The waste toner container is located inside the drum unit.This code means the drum unit is full. To empty there are two caps that can be opened and the waste toner can be emptied. Usually the waste gets full when the unit is very close to be replaced. You may be able to get some more time if you empty it, but you will probably need to replace the unit soon.

Nov 12, 2013 | Kyocera Mita Kyocera FS-1028 MFP Laser...

1 Answer

I've refilled Kyocera FS- 1135 mfp then not genuine toner had detected.. but the toner i used is kyocera compatible toner and its working to other kyocera machines.. Is it because of the IC chips or what?...


Kyocera compatible does not mean Kyocera genuine. Not using genuine toner can invalidate your warranty. If that doesn't bother you then the printer detecting a non-genuine cartridge is not an issue.

Sep 02, 2013 | Kyocera FS Office Equipment & Supplies

1 Answer

Not genuine toner detected on FS 1135 MFP


use a new genuine kyocera toner. refurbs, refills, and reset chips will cause damage after awhile. OEM supplies are expensive but worth it in the long run.

Sep 02, 2013 | Kyocera Office Equipment & Supplies

1 Answer

I have a FS-1118 MFP Kyocera printer it has refused to print and the error message is that the waste toner is full how can i empty the waste toner?


yyou have to be careful when doing this.
the waste toner is built in to the process unit (drum unit) and has a plug on the side.
remove the plug and tip it out.

Jan 21, 2009 | Kyocera FS-1118MFP Laser Printer

Not finding what you are looking for?
Copystar Kyocera FS-1135 MFP/DP Multifunction Printer Logo

Related Topics:

2,912 people viewed this question

Ask a Question

Usually answered in minutes!

Top Copystar Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Tammie Duggan
Tammie Duggan

Level 2 Expert

57 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you a Copystar Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...