Question about Amana 30" Self Cleaning Electric Range Stove W/ Oven Freestanding Black & Gray

1 Answer

F4 error

Trying to preheat oven and getting an error F4

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Amana Master
  • 6,048 Answers

The F4 error means that the oven temperature sensor is giving an open signal. Probably the oven temperature sensor needs to be replaced. However, sometimes, the wiring harness between the sensor and the control unit has a fault or the control unit (computer) is bad.

I hope this helps.

Cindy Wells

Posted on Mar 16, 2013

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My whirlpool free standing convection oven


sounds like control board defective, technician will have to verify.

Jan 30, 2016 | Whirlpool GFE461LVB Black 30" Steam Clean...

1 Answer

What does F1 mean


The Fault Code/s will show up in the appliance Display
F0 - No Alarm Signal
Replace Main Electronic Control
F1 - Door will not Lock
Check door lock. Is Door Lock Getting Power
F2 - Door will not Un-Lock
Check door lock. Is Door Lock Getting Power Supply? Check Control Thermostat
F3 - Self Test Error
Disconnect Appliance from Mains Supply, Wait 5 Minutes and then Reconnect to Mains Supply
F4 - Shorted or Open Circuit Oven Temperature Sensor
Replace Oven Temperature Sensor, Check Sensor Harness Connection between Sensor and Control Unit
F5 - Relay Contacts Failed - Sticking
Replace Main Electronic Control
F6 - Power Board Temperature Too High
Check Correctly Installed, Check Cooling Fan Assembly, Ducting and Airways
F7 - Incorrect Polarity - Mains Supply
Check Mains Connection - Live & Neutral round the wrong way
F8 - Power Supply to Interface Problem
Check Wiring Harness, Replace Main Electronic Control
F9 - Procesor is Auto Resetting
Disconnect Appliance from Mains Supply, Wait 5 Minutes and then Reconnect to Mains Supply

Apr 05, 2015 | Electrolux White Westinghouse Stove Range...

1 Answer

We had a power outage and now the oven will not come on the rest of the stove works inckuding the clock the preheat and oven lights come on but the oven does not heat up, we have tried turning off the


My guess is the element in the back of the oven took that moment to die. You will have to get an appliance engineer or good DIY electrician to check the supply to the element to be sure. While you have it out you can write down the serial numbers etc off the label on the back. You will need them to purchase a new element. Just go online to an appliance spares specialist.

Dec 29, 2014 | Kenmore White Electric Stove

2 Answers

Black smoke coming from oven while preheating


CLEAN the OVEN put a drip pan under stuff when cooking

Dec 21, 2013 | Premier 24 inch Compact Gas Range w/ Solid...

1 Answer

Maytag Range won't heat up oven or cook top


you have melted internal wiring, probably some mice ate it. call an electrician and DO NOT USE IT!! turn off at the wall/fusebox

Nov 20, 2013 | Maytag MER8770WS 30" Freestanding Electric...

1 Answer

DCS RGS slow to preheat


You didn't state whether you used a DCS conversion kit or not. I was able to find conversion instructions for a model similar to yours (not an exact match) but it will give you an idea as to what all is involved.
DCS RGSC 305 Instructions Manual

Dec 14, 2017 | DCS RGU-364GL-N Professional Series 36"...

1 Answer

I have a 2003 gas oven, model #JGBP28BEK3WH. All the top burners kick on but the oven doesn't. I can set the oven to preheat but so far it never lights. Please help.


You probably have a bad ignitor in your oven. The gas will not turn on until the ignitor glows red hot - less resistance and more current for valve to open. This can be replace by a repairman or a tool savvy homeowner. If you call a repair man, your looking at 150.00 to 200.00. Part can be from 50.00 to 110.00. I usually charge 110.00 plus the price of the ignitor.

Aug 04, 2010 | General Electric Profile JGP945 30 in. Gas...

Not finding what you are looking for?
Amana 30" Self Cleaning Electric Range Stove W/ Oven Freestanding Black & Gray Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Amana Cooktops Experts

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Cindy Wells

Level 3 Expert

6048 Answers

Paul Carew

Level 3 Expert

3480 Answers

Are you an Amana Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...