Question about Cisco Catalyst 3560-24PS Switch

Open Question

Catalyst switch asking for ip - Cisco Catalyst 3560-24PS Switch

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the notable differences between the Cisco Catalyst 2960-X and 2960-XR switches?


The Cisco Catalyst 2960-XR switch models have the following additional capabilities in addition to the features in the Cisco 2960-X models:
Dual-FRU power supply with integrated fan
Layer 3 features with IP Lite feature set
Configurable 8 queues per port (standalone)
48 Ether channel groups
http://www.3anetwork.com/search/2960x

Apr 17, 2015 | Cisco Computers & Internet

2 Answers

Cisco Catalyst 2960-S VS 2960-X Series Switches?


2960-X is manual configurable and 2960-S is smart dont need to configure.

Apr 10, 2014 | Computers & Internet

1 Answer

How to creat subnets in anetwork using 20.1.10/24


That's not a valid IP address.
If you mean a network 20.1.10.x, then in a 24 bit subnet it would work just the same as a 192.168.1.x network. But you're using a public IP subnet.

Apr 06, 2013 | Cisco Catalyst 4006 Chassis ( 4006)

1 Answer

Can't console cisco catalyst 3500


It's possible that the management port is on another VLAN or is not enabled. Your most reliable bet is to try a serial connection to console in.

Alternatively, there is a procedure that will work even if you don't know the password:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/release12.0_5_wc5/swg/swtrbl.html#wp1028958

Jul 15, 2009 | Cisco Catalyst 2924-XL Enterprise Edition...

1 Answer

Switch compatibility problem.


I think you need to go from the leased line to the ROUTER first. The switch you said was unmanaged...so as far as I can tell there is NO IP for the DLINK. If that's the case your router needs to be before the switch and after the modem.

Mar 10, 2009 | Linksys (NH1005) 5x10/100 Mbps Networking...

1 Answer

IP IOS Command not working with switch


you want to give IPs to your VLANs and also make physical interfaces members of a VLAN instead of giving IPs to physical interfaces

Mar 05, 2009 | Cisco Catalyst 2960 8-Port Ethernet Switch...

2 Answers

Switch IP


Hi, the ports themselves don't have an IP address. The switch has one IP address for online configuration. this model does switching only and doesn't use DHCP to issue addresses

Feb 20, 2008 | Cisco Catalyst 2950 24x10/100 Mbps...

1 Answer

Network


Follow these steps

example

int serial0
ip address 192.168.1.1 255.255.255.252 ( give 1.2 to other end)
ip address 192.168.2.1 255.255.255.252 secondary ( give 2.2. to other end)

ip load-sharing per-packet

ip route destination network destination mask 192.168.1.2
ip route destination network destination mask 192.168.2.2

GOOD LUCK

Jan 07, 2008 | Cisco Catalyst 2950 24x10/100 Mbps...

Not finding what you are looking for?

Open Questions:

Cisco Catalyst 3560-24PS Switch Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Jeffrey Groves
Jeffrey Groves

Level 3 Expert

573 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...