Question about Bowflex Treadclimber

1 Answer

E2-C error code

Just purchased this used TC5000 and am getting this error code and the machine shuts down. Can you help?

Posted by on

  • 1 more comment 
  • mrliken Mar 03, 2009

    What I didn't put, is that this code comes on after 5-10 minutes of operation. I had performed the input and stepped like I have never stepped before.

  • Anonymous Mar 18, 2009

    I don't have the manual anymore,but have the same problem. E2-C and machine shuts down after a few mintues...Anyone want to Help meeeeeeeeeeeee lol Thanks,D (LI New York)

  • overonlemon Apr 04, 2009

    My TC5000 stops intermittently as well. I start my workout, then for no apparent reason, the unit stops. I start it up again and it runs and then randomly stops for no reason. HELP!

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 91 Answers

You must be steping on the machine for the generator to allow you to set its functions , keep steping until you have entered in your requirements and weight and workout that you would like to have ,this will allow your programming also to be saved ,also see if you have battery backups on this model ,they can be dead ! , hope this helps thanks glenn

Posted on Mar 03, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have agbd307pd whirlpool goldaccubake system it starts but then shuts off with codes e2 F2 e2


Laura Montano, We would like to inquire further about your post with you. Please respond back to this email address Whirlpool_Reviews@Whirlpool.com with your name, user id (Laura Montano), phone number, street address, zip code, reviewer name, model & serial number, and date of purchase on the appliance.

Apr 15, 2017 | Whirlpool Kitchen Ranges

1 Answer

What do error codes FDL and R11 indicate?


Hello Lidia, thank you for your inquiry!
Based off the information you have provided your Frigidaire dryer is not heating and displaying error codes "FDL" and "RL". I am showing that the codes you have provided are not valid error codes. I would recommend performing a reset on your dryer and you can do that by disconnecting power from it for at least ten minutes. I see that you have already replaced the igniter; however, if you continue to have issues with the error codes I would suggest having a professional technician out. This will help you avoid any further unnecessary part purchases. Hopefully this information is helpful to some degree. -Matt

Feb 15, 2016 | Frigidaire Affinity 5.8 Cu. Ft. Gas Dryer

1 Answer

What does error code 1649uli indicate?


You have to call the Company representative who will guide you through the error code. Call :1-800-628-8458
In case you don't have the manual, here it is: http://www.searspartsdirect.com/partsdirect/user-manuals/TC5000-Bowflex-Parts-BOWFLEX+TREADCLIMBER-manual

Good Luck!

Feb 02, 2016 | Bowflex TreadClimber TC5000

1 Answer

Samsung dishwasher dms500trw. what does error code f3 mean. i just replaced the hose after e2 code now 2 weeks later i have f3 code?


Samsung DMS500TRW - ProductReview.com.au

www.productreview.com.au > ... > Dishwashers > Freestanding > Samsung

Rating: 2.4 - ‎49 votes
2.4 out of 5 stars for Samsung DMS500TRW in Freestanding Dishwashers (page 2). ... The machine gives an E2 error and will not pump water out. I have to manually cup it out. ... F3 Error. 1 out of 5, reviewed on Sep 30, 2013. Purchased dishwasher in Jan 2012. First broke ... F3 what dose this code mean? Dell asked on ...

Nov 26, 2015 | Dishwashers

1 Answer

Godrej eon washing machine e2 problem.


eco wash fault this can be down to hard water areas, the switch for the water intake is stuck can be opening but not all the way so it shuts it back off and you get this code.

May 09, 2014 | Washing Machines

1 Answer

Start shuts down machine and blows circuit breaker


see the video attached. and proceed according. However you must test the power cord for short circuit. some wires is touching each to another. Or the outlet wall the wires are loosing touching each to other and blowing the c.breaker, or call some electrician for to fix it.
God bless you

Oct 17, 2013 | Bowflex Tc5000 Climber Treadclimber...

1 Answer

Nautilus tc5000 treadclimber has e5 error. Will run for 5 seconds, then stops. Thanks


The E5 error code indicates the electronics on your treadmill require calibration. Recalibrate the machine per the instructions in your manual to clear this error code.

Apr 25, 2011 | Sport & Outdoor - Others

Not finding what you are looking for?
Bowflex Treadclimber Logo

1,261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bowflex Exercise & Fitness Experts

Ekse

Level 3 Expert

13434 Answers

Bob Hawk

Level 1 Expert

2 Answers

ray gallant

Level 3 Expert

66557 Answers

Are you a Bowflex Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...