Question about Linksys Wireless-G Broadband Router
The Linksys G router gives you both wired and wireless connections over a broadband Internet connect to create a local area network. The Linksys router is compatible with wireless G and B devices, through the 2.4-GHz wireless band. The wireless speed is at 54 megabytes per second and you can get 100 megabytes per second with a wired connection. You have to set up the wireless configuration on the Linksys before using it on your network.
Plug the router's power cable into an electrical outlet. Attach an Ethernet cable into the Internet port on the back of the router. Connect the other end into your broadband modem. Connect your computer to the Linksys G using another Ethernet cable. This Ethernet cable can go into any of the wired router ports. Open your Internet browser. Type "192.168.1.1" in the address bar and hit "Enter." This is your router's IP address and the home of its Web configuration page. Click "Wireless." Click "Manual." Alter your SSID, also known as your network name. You can change this name to any value that you want. You can also change the wireless channel if you are in an area with many wireless connections that may interfere. Click "Save Changes." Click "Wireless Security." Choose an encryption method to encrypt your wireless transmissions. WPA or WPA2 are common security protocols you can use in wireless networks. Input a network key, also known as the network password. Click "Save Changes."
Setting Up WPA Wireless Security on a Linksys Wireless Router http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3696 Wireless G-Broadband Router support http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G b> b> Changing the Wireless Network's Name (SSID) on a Linksys Router http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=4037
Posted on Mar 27, 2013
Try to reset the router. This should resolve your problem. That model has a small hole were you must press with some a paper clip for exemple for a few seconds. This will reset the router to its original state.
Posted on Nov 07, 2008
If you want to receive "incoming" telephone-calls:
ADSL modem <---> Linksys SPA <---> wrtu54g <---> wired computer
and Linksys SPA <--- telephone-line-1 --> telephone hand-set
and Linksys SPA <--- telephone-line-2 --> FAX machine
or Linksys SPA <-- telephone-line-1 --> mechanical telephone-splitter
with telephone-splitter --> hand-set
with telephone-splitter --> FAX
Posted on May 21, 2009
• Make sure that the computer is connected directly to either port1,2,3,4 and light is should be on.
• Check if computer's ip
- go to start, control panel, network connection, and then right click local area connection click status and then support. Make sure that you are getting the starting ip of 192.168.1.x )type should be assigned by dhcp. * If it's manually configured, right click local are connection and then click on properties. Look for internet protocol tcp/ip and then click on properties, set it to obtain ip automatically and then click ok
• If you are getting the correct starting ip and you can't still access it , make sure that you can ping the router. Go to start and then look for command prompt or click start and then type cmd on the run field. type ping 192.168.1.1 - if you receive replies, go ahead and access the set up page. Using internet explorer, run field(http://192.168.1.1) or you can try another browser.
Posted on Jan 06, 2010
Tips for a great answer:
Dec 12, 2014 | Linksys Wireless-G Broadband Router
Oct 09, 2012 | Linksys Wireless-G Broadband Router
Oct 23, 2010 | Linksys WRT54GC Compact Wireless-G...
Sep 21, 2010 | Linksys Wireless-G Broadband Router
Jan 27, 2010 | Linksys Wireless-G Broadband Router
Jan 30, 2009 | Linksys Wireless-G Broadband Router
May 07, 2008 | Linksys Wireless-G Broadband Router
110 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: