Question about Magic Chef CPR1100AD Gas Kitchen Range

Open Question

Magic Chef CPR1100ADW replaced thermostat, but

Magic Chef CPR1100ADW Replaced thermostat because oven wouldn't work and pilot wouldn't light. Now pilot stays on but flame is too high. There are two adjusting screws on thermostat, one for temp and one for pilot? Does not adjust down. The pilot assembly is new, oven works now, and burners are fine. How do I get the pilot to turn down?

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 15 Answers

SOURCE: Magic Chef CPR1100ADW

I just dealt with the same problem. On this model, the (already very compact) oven temperature control includes a pilot safety valve. With the control turned to OFF, push in on the knob while applying a lighted match to the pilot. After the pilot lights, keep holding the knob in for a few seconds. When you release it, the pilot flame should stay on.

Me, I'm interested in why the pilot went out in the first place and what to do if it keeps going out. IS there that repair manual (online or in print) that jvmagic was asking about?

Posted on Dec 18, 2007

Ad
Master_Tech

Gary Davd

  • 770 Answers

SOURCE: magic chef propane oven. recreation vehicle application

you need to check the amp draw on the ignitor.. if it is between 3.5 -5.2 amps your gas valve is bad..if not the ignitor is bad..YES theignitor can glow and still be bad due to lack of amp draw to open the valve..check that and let me know

Posted on Feb 22, 2008

Anonymous

  • 1605 Answers

SOURCE: How do you light the oven pilot on Magic Chef 31000PAW

open the oven. take out the racks and push on the button plan toward the back and left it out of the oven.
you will see a small orfix appromiate middle of the fire ring. light a match to it. put eveything back.
you in business.

Posted on Apr 07, 2009

Tony

  • 246 Answers

SOURCE: cpr1100adw magic chef

Most, if not all, gas ovens do not have pilot lights any longer. They are electronically ignited. You could have a loose wire on the igniter or a faulty igniter. If your oven is new it should be covered by the warranty.

Posted on Jul 26, 2009

heatman101

D. Floyd Kolb

  • 43501 Answers

SOURCE: ovens not lighting magic chef

Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101


wwt

Posted on Sep 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Magic Chef gas oven. Model CPR1100ADW. The pilot light don't light up nor does it come on. I don't smell gas coming from it. I can't figure what it is. Can you help me.


The oven probably has an igniter to light the pilot, and when not in use, shuts the gas off. Unplug the stove to replace the igniter. Enter your stove info and "how to replace oven igniter" on you tube for videos and detailed instructions.

Dec 14, 2017 | Magic Chef Kitchen Ranges

1 Answer

Is there a conversion kit for magic chef CPR1100ADW


Yes, there is an LP conversion kit for the CPR1100ADW. Sears Parts Direct lists it here: http://www.searspartsdirect.com/model-number/cpr1100adw/1429/0124002.html . Select the Gas Control drawing. The direct link to the LP orifice kit, part number 74009923, is http://www.searspartsdirect.com/part-number/74009923/0022/464.html?modelNumber=CPR1100ADW&categoryName=Free%20Standing,%20Gas&brandName=MAGIC%20CHEF . Note: the Magic Chef range uses the same parts as a Whirlpool or Maytag range.

The gas regulator also has to be adjusted. Most ranges with converter kits available just require the regulator to be removed and turned 180 degrees before replacing it. It's recommended that a LP service person do the work. The air flow may need to be adjusted and any mistakes could be dangerous.

I hope this helps.

Cindy Wells

May 06, 2017 | Magic Chef Kitchen Ranges

1 Answer

MY MAGIC CHEF, CONCEPT SERIES, W/MAGIC CONTROL CENTER DOESN'T LIGHT.


I have a Magic Chief Concept Series oven - Replaced the Thermo-coupler and the control switch. I now have a pilot light but the thermo-coupler doesn't get hot enough to light the burner, But if I take a lighter and put it on the thermo-coupler it will but when I take if off it shuts off after a few seconds. Could you please give me Ideas of what could be wrong

Dec 18, 2012 | Magic Chef Ovens

1 Answer

We have a Magic Chef gas oven (model # CPL1100BDW) without electronic ignition. The oven isn't working. The oven pilot is out, can't get it to light, and the oven will not light - (obviously)....


Hello & Welcome to FixYa
If the pilot is clean and still won't light then the problem is with the safety valve that won't open and so needs replacement. Please get back to me if you have any other questions.
Kevin

Nov 14, 2011 | Magic Chef Ovens

1 Answer

I have a magic chef gas stove witch has electric pilots.when i turn on oven it seems the electric pilot lights up but the burner doesn't come on.


Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or
Oven not Heating

Oven Problems
Replacing the Igniter


heatman101

Jan 06, 2011 | Magic Chef Ovens

1 Answer

Maytags cpr1100adw model has a problem with the oven pilot. For some reason it does not stay on. I had the igniter replaced in March. What could be the problem?


Check the nozzle of the pilot. It may need cleaning. As you do this, find out if your igniter produces the spark
necessary to get your gas range working. Just send us
your e-mail so we will know the result.

Oct 09, 2009 | Magic Chef CPR1100AD Gas Kitchen Range

1 Answer

Cpr1100adw magic chef


Most, if not all, gas ovens do not have pilot lights any longer. They are electronically ignited. You could have a loose wire on the igniter or a faulty igniter. If your oven is new it should be covered by the warranty.

Jul 26, 2009 | Magic Chef CPR1100AD Gas Kitchen Range

1 Answer

Ovens not lighting magic chef


Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101


wwt

Dec 30, 2008 | Magic Chef 31000 Gas Kitchen Range

1 Answer

Old Magic Chef Gas Oven won't light


sounding like thermostat isn't working. If you could ohm out the t-stat should be closed when you call for heat. If that passes the test then only thing it could be is the gas valve.

Nov 24, 2008 | Magic Chef Ovens

2 Answers

Magic Chef CPR1100ADW


I just dealt with the same problem. On this model, the (already very compact) oven temperature control includes a pilot safety valve. With the control turned to OFF, push in on the knob while applying a lighted match to the pilot. After the pilot lights, keep holding the knob in for a few seconds. When you release it, the pilot flame should stay on.

Me, I'm interested in why the pilot went out in the first place and what to do if it keeps going out. IS there that repair manual (online or in print) that jvmagic was asking about?

Apr 13, 2007 | Magic Chef CPR1100AD Gas Kitchen Range

Not finding what you are looking for?
Magic Chef CPR1100AD Gas Kitchen Range Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magic Chef Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3480 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Are you a Magic Chef Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...