Question about Kenmore 53642 / 53644 Side by Side Refrigerator

Open Question

Kenmore 79182990 leaking ice maker - Kenmore 53642 / 53644 Side by Side Refrigerator

Posted by Anonymous on

Ad

5 Suggested Answers

Tony Coultrip

  • 183 Answers

SOURCE: kenmore 9550580 ice maker

try turning down water pressure or reduce flow into ice maker by turning tap partially off, this should resolve problem. Regards Advisor

Posted on Aug 23, 2007

Ad

radarman19

  • 319 Answers

SOURCE: kenmore side by side model 363.9534713

Call tech support! That's why these people get paid. Sites like this wouldn't need to exist if they did their jobs correctly!

Posted on Mar 11, 2008

Ad

Michael Anderson

  • 172 Answers

SOURCE: Kenmore Coldspot w/Ice Maker Not Making Ice

hi LOP7,
In most cases you can easily solve this problem.
step one would be to make sure your freezer is getting cold enough. If you have icecream in your freezer is it frozen solid or is it soft. Most icemakers cycle around 0 degrees and if your freezer is not getting to 0 then it will not cycle and it will not make ice.
Step two would be to make sure you icemake is cycling. To do this simply lift the little shut off arm on your icemaker and wait about an hour then go back to the icemaker and drop the arm down. The icemaker should start going through a cycle. You should notice the arm slowly begin to raise and the ice dispencer fingers will begin to turn. Then you will hear it call for water. You may hear a humm.
If the freezer is cold enough and the icemaker is cycling that only leaves the inlet valve. replace the valve and enjoy the ice.
If the freezer is cold enought and the icemaker does not cycle, then you have a bad icemaker. Simply replace the icemaker and viola.
Third if the freezer is not cold enought 0 defrees. Then you may have a defrost problem. In this case post more info and I will be happy to help. Good luck mca0824@aol.com

Posted on Apr 30, 2008

Mark Nichols

  • 351 Answers

SOURCE: Kenmore Ice Maker Not Working

Probably need a new ice maker, whirlpoolpartssurplus.com

Posted on Jun 23, 2009

Anonymous

  • 93 Answers

SOURCE: We have a Kenmore Coldspot

It is probably your defrost cycle causing this. Obviously if you shut the water line off then it is not coming from there so there is only 1 other place it could be. Every 8, 10, or 12 hours depending on you defrost timer the refrigerator will defrost itself.......the frost melts into water and drains into a pan under the fridge. If the drain is plugged then it will just run into the refrigerator. If you have a freezer on top model then just remove the back wall inside the freezer, it will be a few 1/4 inch screws....If you have an icemaker then remove that too, it will be held on with 3 screws. Just look behind that wall and you will probably see ice at the bottom.....defrost the ice and pour a cup or 2 of water into the drain to make sure it is unclogged. If it is still plugged up then you have to find the clog....either in the back of the fridge behind the lower cover or in the refrig compartment near the back of the roof.

Posted on Sep 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Kenmore 795 leaking water behind ice maker


I would first check the hose that brings the water from the pipes in the house up into the icemaker make sure that's not leaking. Then I would check all of your connections, Making sure they are good and tight and that there's no holes either in the copper line or the poly plastic line. If all of that checks out fine and you have no leaks there then I would investigate the icemaker.

May 27, 2018 | Kenmore Refrigerators

1 Answer

What would cause my Kenmore Coldspot ice dispenser to freeze up where the water enters from the tubing into the ice maker itself?


Small leak in the tubing. remove ice-maker, cut tubing about half an inch back and reconnect ensuring the tubing is completely on the ice-maker.

Jul 05, 2016 | Kenmore Refrigerators

1 Answer

Kenmore coldspot model 105-56532400 ice maker leaking water. How to fix?


The water supply solenoid valve may be malfunctioning or the fill tube to the icemaker may be mis-positioned.

Mar 01, 2015 | Kenmore Refrigerators

1 Answer

Water is leaking from the Ice maker on top of the


the water valve on the back of the fridge has malfunctioned.

Jul 21, 2010 | Kenmore 57029 Side by Side Refrigerator

1 Answer

I have water leaking from the lower left rear side of my Kenmore Elite side-by-side with the ice maker ON.The leaking stops by turning the ice maker off-the water dispenser works fine with the ice maker on...


there are 2 pipes going from the pump at the bottom of your unit ... 1 to the ice maker and the other to the filter for water.
make sure the pip for the ice make is tight in the connector of the valve ... let me know...

Nov 27, 2009 | Kenmore 24.5 cu. ft. Side-by-Side...

2 Answers

Getting water


I have Kenmore Coldspot refreidgerator and am having a problem with water pooling inside the fridge at the bottom underneath the drawers (mostly the left side). Where is the water coming from and it formed a thin ice.
Thanks

Nov 25, 2009 | Kenmore Refrigerators

1 Answer

Ice maker drip into ice bucket and manual cycle leaks more water


Need to take the ice maker out to measure the amount of water input into the ice tray. In this case the tray was already full (from the leaking valve). The spillage I saw was just the tray overflowing. Time for a new valve.

Apr 28, 2009 | Kenmore Refrigerators

1 Answer

Ice maker leaking


yes go to sears parts center and buy the ice maker part # 4317943 thats if the ice maker is in line is leaking because the mold inside is peeling off due to the wtr being to hard repl ice maker is realy easy loosen screws remove harness and repl new one that is all you might not need all parts in box

Oct 27, 2008 | Kenmore 55612 / 55614 / 5561 / 655619 Side...

1 Answer

Kenmore Coldspot Side by Side Model #57562791


hi debie normaly the life of these ice maker range from 3 to 4 years then the wtr hardness eats them up and the mold start leaking wtr but if is a fairly new model the you have a faulty wtr vale that is not closing sending wtr all the time to the ice maker repl the ice maker is you see is peeling of the texture inside if it is ok repl the valve

Oct 04, 2008 | Kenmore 55612 / 55614 / 5561 / 655619 Side...

Not finding what you are looking for?
Kenmore 53642 / 53644 Side by Side Refrigerator Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Refrigerators Experts

Jimmy

Level 2 Expert

61 Answers

geob91

Level 2 Expert

128 Answers

John Tripp
John Tripp

Level 3 Expert

4656 Answers

Are you a Kenmore Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...