Question about DISH Network Televison & Video

1 Answer

Dual remote set up

How to set up dual control on D.V.R.

Posted by on


1 Answer

  • Official Brand Answer
  • 263 Answers

I would be happy to assist you in setting up multiple remotes to the same TV. To do this is a quick fix. If you want the remote to control the TV1, make sure the remote has a green '1' tab in the bottom. Once that is done, access the system information screen and program the remote to the listed remote address. The steps are the same with the TV2 remote, except make sure there is a blue '2' as the bottom tab. I have provided the steps to program the remote below!
Addressing Remote to Receiver:

1.) Go to System Info screen.
2.) Hold down the SAT button until all mode lights light up.
3.) Enter a number between 1 and 15 using the number pad on the remote.
4.) Press the pound (#) button.
5.) Once the SAT button blinks three times, press record.
6.) Test the remote and see if it works.

Posted on Apr 24, 2013


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts.

Aug 24, 2014 | Audiovox RCA-RCR313BR Big Button Universal...

1 Answer

My dual dlcd 2001 child lock i do not have remote how can i child lock off with out remote

To unlock the child lock, you should have its remote control. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchased a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. Check this link too. If you see these sites by "MOSAIC" or "Magazine" view will make surf easier.
Universal remote controls are available at most of the electronic spare part selling shops or online by Ebay or

May 22, 2014 | Televison & Video

1 Answer

Rcr314wr codes

If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls.See it in "Mosaic" view.It will make surf easier.
Gopakumar Gopalan Google

Feb 12, 2014 | RCA RCR314WR 6-Device Big Button Universal...

1 Answer

I just got a new ps3 after my old one died. my dual shock controller will not work with it, it just keeps blinking and cuts off...

connect using the cable and re-assign the controller in the settings menu, this should enable you to use it remotely

Feb 01, 2011 | Sony Dual Shock 3 Controller for...

1 Answer

My grandad has a urc20-dif remote that he got from asda he has lost the paperwork for the control to help get it to work with the tv . the tv is a dual tv which he also got from asda .i know the remote...

Dual have loads of codes

004 023 090 126 127 132 140 161 185 195 197 207 211 219 308 309 310-up to 338 376 377 378 381 382 395 396 405 437 440 454 459 468

Hold the Set button - press TV button and when the red LED shows type in the 3 digit code.


Jul 29, 2010 | Directed 434MHZ Remote Control

1 Answer

Dish network control not working on 2nd. tv

You have a dual receiver and 2 remotes. make sure that receiver is in dual mode. That you press the sat key on remote 2 if it will still not operate take remote 2 to the receiver. With remote #1 press the menu button twice you should then be on they system info screen. Pick up remote #2 press and hold sat key until it blinks press record 3 times . press red power button and if tv2 light goes off and on the remote should work again for tv2 . Use remote #1 press select exit screen,

Jun 02, 2010 | DISH Network IR Remote Control

1 Answer


It changes the frequency (because it's a dual frequency remote). I don't know which setting is which frequency though.

Apr 10, 2010 | Genie Company IntelliCode GICT390-1BL...

1 Answer

In single mode, my remote for TV1 works, but in dual mode, only my remote for TV2 work. In single mode, both remotes can change channels, record, etc. In dual the Remote for TV2 turns on the blue light and...

Your shared view is enabled. , press the menu button, then option 6 then option 2, disable shared view then select done. ( this can only be done in single mode) then go back to dual mode.

Oct 28, 2009 | DISH Network IR Remote Control

1 Answer

My dvr remote 2 has been taken over by my other tv2 remote is there a way activate the former remote? I just had a hdtv dual dvr installed and a new dual reciever. I already had a dual dvr. When I had the...

Unplug one of the receivers. Now go to the second and with the TV1 remote press MENU-MENU and you will see the two remote addresses displayed. On the TV 2 remote that is associated to turn off the TV2 with this receiver press and hold the SAT button on the top left of the remote until all the buttons across the top illuminate. Now key in a two digit number that differs from the one for TV2 displayed on the screen. Now press the pound sign and the SAT button will flash three times. Next press the small record button until the TV2 address changes to the correct two digit number. Now you should be able to turn the other receiver back on and be able to control each TV2 independent of each other. Thanks for using Fix Ya. If you need further assistance let me know.

Sep 17, 2009 | DISH Network IR Remote Control

1 Answer

Need user manual for ge fm dual wake radio 7-4852

so then what are you looking for? instructions on a remote or tv or stereo?

Jan 08, 2009 | GE JASRM24912 Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76171 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides