Question about Frigidaire FEB27S5A Electric Single Oven

1 Answer

Range led flash code F7

Stove is about two years old ,flashes code f7 . I powerd down range ,reset the clock hit clear ./ and now it blinks error

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 48 Answers

Hello,

Here is the error information for Fault Code F7

F7 Lock motor relay watchdog circuit is active when it should be off Microprocessor checking the operation of the EDC lock, relay failed. Replace EDC.
Hope this is helpful, I will also provide you a link to to a helpful site.

http://www.applianceaid.com/fault_codes.html

Posted on Mar 14, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My stove is beeping and is flashing F7. What does this mean, it is a built in oven.


Hello,

The F7 error code means that a function key on the touchpad is shorted or stuck, the F7 can be cleared by pushing the clear/off button,if the error code returns the touchpad would need to be replaced.


GENE

Sep 10, 2011 | GE Ovens

2 Answers

I have a Thermador model smw272 and F 7 is flashing on the lower oven display, with a beeping sound every second.


Hello & Welcome to FixYa

F7 error code is displayed when the clock assembly/electronic range control (ERC) goes bad and needs replacement. Please get back to me if you have any other questions.


Kevin

Apr 30, 2011 | Thermador SMW272 Electric Double Oven

1 Answer

I have a jen air propane oven and four stove burner and it is flashing a the code f7-1 and saying call a a tech. Please help the beeping is very annoying


Hi, the error code implies that the Function key shorted or stuck..
You need to replace touch pad or if touch pad is part of the clock, replace the clock (ERC).

Oct 20, 2010 | Jenn-Air JJW8530C Expressions Collection...

1 Answer

F7 dC


Hi there,

Well first of all you determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs
If code recurs, problem is in the control. Replace control.
If code does not recur, problem is with the Key Panel.
 
This error code F7 means Function pad button stuck or Bad clock: Unstick button or Replace Electronic Range Control (ERC)......
Post comments for more help or information........

Good Luck!!

Mar 26, 2010 | GE Ovens

1 Answer

Hi. My oven displays F7 in red and next to that


HI. This f-7 is indicating that the touch pad is malfunctioning. Follow the procedure below to address further.

Determine if the problem is with the Key Panel or Control by:

1. Pushing CLEAR/OFF pad.

2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.

NOTE( If your unit is equipped with an integrated touch pad, and control board, you will need to replace the entire control board in this case)

Nov 02, 2009 | GE Ovens

1 Answer

F7 error code


Hi
On a GE range oven F7 indicates either a function pad button is stuck or the clock on the oven is malfunctioning

On the 99 Range oven F7 indicates a shorted Clear/Off Key due to membrane switch or a shorted control or connector

On the GE XL44 Self Clean Oven F7 is Stuck keypad or control relay malfunction
check out more detail here
http://www.fixya.com/howto/h155060-dreaded_f7_error
hope this helps

Aug 14, 2009 | GE Profile JTP56 Electric Double Oven

1 Answer

Error code F7


your problem is with the EOC (Electronic oven control) or touch pad if it is seperate from the control...if the touch pad is seperate...unplug range - access the control panel - remove the wiring/tape wire from touchpad to EOC...plug range back in...leave over night...if f7 code comes back it's the EOC...if the error code clears it's the touchpad...replace the part with the problem...if touchpad built into EOC replace the EOC. Hope this helps...if you have any other questions please feel free to comment again.

Jul 06, 2009 | GE Ovens

1 Answer

Ge oven JTP15 beeping and flashine F7 error


F7 A = Function pad button stuck or
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)

Jun 17, 2009 | GE JTP15 Electric Single Oven

1 Answer

Double GE wall oven - F7 code


from repairclinic.com:

F7 A = Function pad button stuck or
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)
It looks like you have a function button pad stuck or a bad clock.

Unstick button or replace electronic range control.

Apr 27, 2009 | GE Ovens

3 Answers

F7 code keeps flashing on upper oven, nothing on keypad works


A function pad is probably stuck.
Push all buttons several times each. Often this will clear a stuck pad.
If that does not work replace the clock.

Mar 04, 2009 | GE Profile JT910SASS Electric Single Oven

Not finding what you are looking for?
Frigidaire FEB27S5A Electric Single Oven Logo

955 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Ovens Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Bruce Denton

Level 2 Expert

273 Answers

Alan Chouinard

Level 2 Expert

52 Answers

Are you a Frigidaire Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...