Question about KitchenAid Food Mixers

1 Answer

Have lost some oil out of it in moving, what oil

Have lost some oil out of standing kitchenaid mixer in moving, what oil do you use and where do you put it in at ???

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 135 Answers

Hi. The oil you see used to be mixed into the grease base. It's time to change the grease in your mixer. Remove the silver band, Remove the top cover. Remove the transmission cover. Clean out the transmission, remove all grease and oil. Replace with Chevron FM ALC EP-2 grease. This grease is an edible food grade..

Remove the planetary gear, clean and re-grease. If this solution has assisted you, please rate it. ricardok45

Posted on Mar 16, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stand mixer leaking oil


Your gearbox grease is breaking down, time to repack it with some new stuff.

Nov 30, 2012 | KitchenAid KSM150PS Artisan Series Stand...

1 Answer

Leaks oir or grease at shaft where beater attaches


eaking of oil in a stand mixer is not necessarily indicative of a large problem.

Kitchenaid stand mixers are overpacked with oil to last the lifetime of the motor. If the motor sits idle for some time (is not used), the oil may begin to drip from the gears and settle. Oil leakage may primarily be seen from around the beater shaft or planetary action.

A stand mixer can lose up to a 1/4 cup of oil before it needs to be serviced.

It is recommended to run the mixer on speed 10 for 2 minutes in order to redistribute oil back into the motor. In order to prevent future occurences, this is recommended to be done every 3 weeks if mixer is not being used.

If you still feel as though the mixer is in need of service, you may locate Kitchenaid certified repair centers through the following link: http://caservice.kitchenaid.com/

Jul 15, 2009 | KitchenAid K45SS Classic Stand Mixer

1 Answer

The mixer leaks oil around the shaft. Is this a user repairable problem? How do I find service centers?


Leaking of oil in a stand mixer is not necessarily indicative of a large problem.

Kitchenaid stand mixers are overpacked with oil to last the lifetime of the motor. If the motor sits idle for some time (is not used), the oil may begin to drip from the gears and settle. Oil leakage may primarily be seen from around the beater shaft or planetary action.

A stand mixer can lose up to a 1/4 cup of oil before it needs to be serviced.

It is recommended to run the mixer on speed 10 for 2 minutes in order to redistribute oil back into the motor. In order to prevent future occurences, this is recommended to be done every 3 weeks if mixer is not being used.
If you still feel as though the mixer is in need of service, you may locate Kitchenaid certified repair centers through the following link: http://caservice.kitchenaid.com/

Jul 10, 2009 | KitchenAid K45SS Classic Stand Mixer

1 Answer

My mixer is leaking oil. last time we made bread dough in it it sounded kind of rough. we figured wiyh the heavy load maybe that was the rteason for the noise. when we moved the mixer to clean it, there...


Leaking of oil in a stand mixer is not necessarily indicative of a large problem.

Kitchenaid stand mixers are overpacked with oil to last the lifetime of the motor. If the motor sits idle for some time (is not used), the oil may begin to drip from the gears and settle. Oil leakage may primarily be seen from around the beater shaft or planetary action.

A stand mixer can lose up to a 1/4 cup of oil before it needs to be serviced.

It is recommended to run the mixer on speed 10 for 2 minutes in order to redistribute oil back into the motor. In order to prevent future occurences, this is recommended to be done every 3 weeks if mixer is not being used.

May 13, 2009 | KitchenAid KSM150PS Artisan Series Stand...

3 Answers

Food made with KitchenAid Stand mixer tastes like grease


The likelyhood of grease coming from the mixer is extremely small. As long as the beater & bowl were washed first and the shortening you used was fresh, there shouldn't be a grease taste.

Feb 17, 2009 | KitchenAid KITCHEN AID 5 Quart Artisan...

1 Answer

KitchenAid wobbles when mixing


The "wobbling" sounds like an issue of beater to bowl adjustment, which can come out of alignment naturally over time and with use of the machine.

If the flat beater is striking the bottom of your bowl, this may cause the locking mechanism to loosen and may cause the mixing head to "bounce" during use.

Your Use and Care Guide will cover the "beater to bowl adjustment," which you can do at home in a few minutes with a flathead screwdriver.

Also, leaking of oil in a stand mixer is not necessarily indicative of a large problem.

Kitchenaid stand mixers are overpacked with oil to last the lifetime of the motor. If the motor sits idle for some time (is not used), the oil may begin to drip from the gears and settle. Oil leakage may primarily be seen from around the beater shaft or planetary action.

A stand mixer can lose up to a 1/4 cup of oil before it needs to be serviced.

It is recommended to run the mixer on speed 10 for 2 minutes in order to redistribute oil back into the motor. In order to prevent future occurences, this is recommended to be done every 3 weeks if mixer is not being used.

Dec 24, 2008 | KitchenAid K45SS Classic Stand Mixer

1 Answer

KitchenAid 250 Watts; Classic: Leaking Oil


Found this,may be helpful.
Why do I see oil leaking from the beater shaft of my stand mixer?
Some KitchenAid® stand mixers that are not used very often or have been tipped may experience slight oil leakage from the shaft or hub attachment. To avoid the oil leakage, KitchenAid suggests that you run the mixer weekly for short periods of time. Generally, the mixer may lose approximately X cup of oil before repair is necessary. The oil used is FDA approved and is not harmful to consume, should any get into the food that you are preparing.
.

Dec 15, 2008 | KitchenAid K45SS Classic Stand Mixer

1 Answer

Leaking oil at the base


A TV show "How it is made" was in the Kitchen Aid factory and they used a thick grease and no oil in the mixer. Does your unit get hot? Maybe its melting the grease (dark brown)..

Oct 25, 2008 | KitchenAid KP2671 Professional 6 Series...

2 Answers

Bowl Lift


Same problem here, went from working perfectly to mix cookie, now I can barely move it...help!

Dec 31, 2007 | KitchenAid KT2651X Epicurean Stand Mixer

Not finding what you are looking for?
Food Mixers Logo

Related Topics:

323 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

189 Answers

CJ C
CJ C

Level 2 Expert

66 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...