Question about Apple Iphone A1303 16gb
I forgot the passcode so why i cant open my iphone.
I NEED UNLOCK PASSWORD IPHONE SERIAL NO 82109HA1A4S.
Posted on Oct 10, 2014
If you can't remember your passcode, you'll need to erase your device using iTunes, Find My iPhone, or recovery mode. Then use a backup to put your data and settings back on your device. You can try plugging it into iTunes to see if it reboots itself
Posted on Jun 05, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
It depends on the severity and the settings you have given the iPhone and whether you have the computer that you synced your iPhone with... Here's the full explanation. I would recommend reading the second paragraph first, but the solution if you really forgot your password is in the first paragraph.
==If you have the computer you synced your iPhone with==
If you cannot remember the passcode, you will need to restore your device on the computer that was used to originally sync the iPhone or iPod touch so that you can reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced to the iPhone or iPod touch, you will be able to unlock the device for use and remove the passcode but your data will not be present. Refer to "Updating and restoring iPhone and iPod touch software."
"If you enter the wrong passcode too many times, you'll see a message that says "iPhone is disabled" and to try again later. If you repeatedly enter the wrong passcode, iPhone or iPod touch will be disabled for longer intervals, before you can try again. After too many unsuccessful attempts, you won't be able to try again until you connect to the computer you normally sync with. Note that starting with iPhone 2.1 software, there is a setting to cause the device to erase itself after 10 consecutive incorrect password attempts. This setting is off by default. It can be turned on by tapping Settings > General > Passcode Lock after you enter a correct passcode."
The full article can be found here: http://support.apple.com/kb/HT1212
==If you don't have the computer you synced your iPhone with==
If you don't have the original computer the iPhone synced with, the only solution is to force your iPod Touch into recovery mode and then restore it. You will lost all the data on the iPod Touch, but after this method is done, everything will work. You can find the steps to solving this problem here:
Posted on Feb 13, 2009
You can call att or apple to help but if u cant wait and u have a backup saved just turn it off hold the home button then connect the usb for the iphone and restore
Posted on Aug 10, 2009
SOURCE: i forgot my apple iphone
Try the Restore procedure from iTunes If you have problems. But first try the recovery procedure.
Disconnect your iPhone cable but leave connected the other USB end to the computer.
Turn off your iPhone holding the Sleep/Wake button. The red slider bar appears. Slide the bar and wait until the iPhone turns off. Or you could hold the Sleep/Wake and Home buttons at the same time until the iPhone turns off.
While pressing and holding the Home button connect the USB cable to your iPhone. It should power on. Hold the Home button until you see the "Connect to iTunes" message. Open iTunes if necessary. You should see the "iTunes detected an iPhone in recovery mode..." alert screen.
Choose " Restore"
Posted on Feb 21, 2011
Tips for a great answer:
Jan 29, 2017 | Cell Phones
Mar 20, 2014 | Apple iPhone Cell Phones
Oct 11, 2011 | Apple iPhone 4 Black Smartphone
Oct 03, 2011 | Apple iPhone 4 Black Smartphone
Jul 31, 2011 | Apple iPhone 3G
May 10, 2011 | Apple iPhone 3G
Jun 13, 2010 | Apple iPhone 3G
Jan 08, 2010 | Apple iPhone 3G
Aug 09, 2009 | Apple iPhone Smartphone
212 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: