Question about Hitachi Heating & Cooling

2 Answers

AC power light blinks but not starts

I have a Hitachi split ac (model: ACE follow me). Last night it was working fine. But suddenly it has got malfunctioned it seems. The power LED (orange) keeps on blinking and the Filter LED (Red) was on. I assumed that the filter has to be cleaned. I have switched on the AC after cleaning the filter. But the power LED keeps on flashing and it is not responding to the remote control. I have tried to switch On the AC using temporary switch. But the AC is not responding... its too hot here... :-( Suffering a lot.... Tech experts please help

Posted by Anonymous on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,410 Answers

Pull disconnect outside for 10 seconds and reset. See if you get cooling then.

If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

Posted on Jun 27, 2017

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hitachi Master
  • 10,543 Answers

The outside unit has a problem. Have it tested.

Posted on Jun 27, 2017

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Anonymous

  • 1 Answer

SOURCE: SAMSUNG split AC AS09WHWE led keeps blinking.

Samsung Air Conditioners SAMSUNG split AC AS09WHWE led keeps blinking

Posted on Oct 26, 2009

SOURCE: hitachi split ac ace cutout how to go to standby mode

Its very simple to remove that red light glowing on the AC, just switch-off your AC with your remote, but don't turn off the switch that resides with in the plug, remove filters wash gently and dry under shade and place them again in the AC, now keep it without turning-off the switch for 30-60minutes this is called stand by mode. Now take the remote open the panel and press the button that is situated in 4th row and 3rd column. By doing this the red light will be turned off and enjoy your AC.

Posted on Jun 02, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My hitachi inveter split ac green light 9 times blinking and ac not working


Get the model number of your mini split unit (on tag on indoor unit and outdoor unit) Google hitachi error codes. You should be able to pull up a code list for that unit. I believe it may be a communication problem between the indoor and outdoor unit. Possible bad connection of wire going from outdoor to indoor unit

Sep 14, 2018 | Hitachi Heating & Cooling

1 Answer

SPLIT AC CONDENSER TRIPS AFTER 1 OR 2 MINS, ONLY DURING THE DAY TIME


The condensor is not cooling fast enough. Try cleaning the condensor coil. Also check that the fan goes on. At night the outside temperature is cooler and does not need much work to cool down the condensor.

Jul 15, 2012 | Haier Heating & Cooling

5 Answers

LED LIGHT BLINKING OF HITACHI SPLIT AIR CONDITIONER


Did you figure out why the ac wasn't responding to the remote? I am having the same problem. I just cleaned out the filters but it's still not responding to the remote. I have already tried reset button in the remote, which didn't help. I am pretty sure that the remote is not out of battery.

Jun 18, 2012 | Hitachi Heating & Cooling

3 Answers

RED LIGHT BLINKING IN HITACHI ICLEAN AC.. WHAT TO DO?


I was told the same thing that Dennis has posted by the guy who came to service the AC. So I think, it is ok as long as it blinks 9 times in a row and then repeats it after a brief pause.

Jun 08, 2012 | Heating & Cooling

1 Answer

Hitachi split ac ace cutout how to go to standby mode


Its very simple to remove that red light glowing on the AC, just switch-off your AC with your remote, but don't turn off the switch that resides with in the plug, remove filters wash gently and dry under shade and place them again in the AC, now keep it without turning-off the switch for 30-60minutes this is called stand by mode. Now take the remote open the panel and press the button that is situated in 4th row and 3rd column. By doing this the red light will be turned off and enjoy your AC.

Apr 17, 2012 | Heating & Cooling

3 Answers

Hitachi ACE follow me red filter light is always on


the red light turns on automatically after 120 hrs of running to remind us for cleaning the filters. once you cleaned the filters and inserted back , then just keep ac in stand by mode, open the remote panel and press the button on extreme right bottom of the remote ( see carefully in the remote, there is very light image of the filter is made along with the button). red light will go off. no need to press the reset button.... enjoy

Apr 03, 2012 | Hitachi Heating & Cooling

3 Answers

My hitachi split ac is not starting, orange light is blinking........ no response on clicking all the buttons in remote


this problem arises when u disturbe the remote settings. to make it operate again use the following procedure
1.on the power from stablizer
2.press the button in remote with 'key' sign once
3.now adjust the number displayed in remote 9 99 to 3 25 by using 'down '(temp adjustment button) key.
4.press again the button with 'key' sign
5.now ur ac is reinstate
enjoy the breeeeeeeeezzzzzzzzzzzzzzzzeeeeeeeeeeeeee
thanks

atul sharma bikaner rajasthan india

May 05, 2011 | Hitachi Heating & Cooling

3 Answers

Red blinking and ac not working


If the power "flickers" and unit fails but will restart once the breaker is reset, this sounds absolutley normal. It is a safety device that keeps the unit from burning up things due to improper power being supplied. As long as resetting puts it back into service with no issues, don't worry about it.

May 12, 2010 | Hitachi RAS-09UH Air Conditioner

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Heating & Cooling Experts

Lawrence Oravetz

Level 3 Expert

10543 Answers

jws1013

Level 3 Expert

1653 Answers

bobalix

Level 3 Expert

471 Answers

Are you a Hitachi Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...