Question about Callaway Golf Callaway RAZR Fit Drivers Left Handed 8.5 Loft

Open Question

Manual please manual needed to allow proper set up of club , fade draw etc

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the difference between N and NU in the setup of my r9 taylormade driver

From the link below:

Locking the head back in place with the torque wrench supplied free with the club, gives me four main settings to set up the trajectory:
*Towards L sets the club to give a maximum draw (presumably for those with a built slice or fade swing).
*Towards R sets the club for a controlled fade (for those who consistently over draw or pull tee shots)
*Neutral Upright (NU) delivers a slight draw (for those with a tendency toward a slight fade)
* Neutral (N) produces a slight fade (my preferred setting to counteract an occasional hook/pull)

Long term test TaylorMade R9 driver

Dec 02, 2014 | Taylormade R9 SuperTri Drivers

1 Answer

How do you remove front driver side door panel on a 1997 ford club wagon

Open door, remove handles, arm rest etc. then door panel screws and then with a thin blade tool like a putty knife or a proper trim panel tool feel out where the internal fasteners are and pop them out with a force pushing the panel away from the door.

Oct 04, 2014 | GE 1997 Ford E-150 Econoline Club Wagon...

1 Answer

I bought an r9 supertri driver and need the manual for it. any ideas?

Movable Weight Technology TM, is discretionary clubhead weight that can be easily redistributed by the player to change the characteristics of the club. By moving differently weighted cartridges, using a proprietary TaylorMade wrench, into strategically positioned ports, CG location can be optimized per golfer. Positioning more weight in the heel and less in the toe, speeds club head rotation during the forwardswing, which promotes a draw and/or reduces a slice.

Here is a link that will definately help you with the adjustment aspects of your club:

Aug 12, 2010 | Taylormade r7 Draw Fairway Woods

1 Answer

How to adjust the speakers to the back only in a suzuki swift

Please try the selection button again (the one that allows you to set the bassetc) and look for FAD or fade option. That will adjust the front or rear volume

Jun 08, 2010 | Car Audio & Video

1 Answer

More height off the tee required and ball flight to the left

If you are using an iron club...never place the tee high...the higher the tee with an iron, the more draw or fade you will get. Keep the tees closer to the ground and take your stance back a little too...

Mar 16, 2010 | Taylor Instruments Taylor Made R7 Quad 9.5...

2 Answers

How to adjust the r7 fron straight, draw or slice? if I want a do

The bad think about golf clubs is they're made a certain way at the factory and it's pretty hard to change them. Forged irons hosels can be bend to change loft and lie but woods are pretty much the way you buy them. To change from slice to hook or visa versa you have to toe the face in or out and you can accomplish this by yourself just rotating your grip on the club to turn it in or out but when you do that you change the level of the sole of the club and you also change the pitch of the club face. If you want that kind of customization you need to take that into account when you purchase the club and buy what you need rather than try to change it later.

Dec 18, 2009 | Taylormade r7 Draw Fairway Woods

3 Answers

Replaced Display on Vostro 1400, now it's light/fading in areas

Sounds like the connections are either loose or not properly connnected.
Checke the connectors again, and make sure you're not bending any pins in the process.

Jun 16, 2009 | IBM ThinkPad R51 Notebook

2 Answers

Wiring for Pioneer DEH-P5900IB

A word of caution here.If the wires are ,old, faded cut etc, please consider REPLACING them.
Replace ALL the wires with new ones as wires matter a lot in a car stereo .
as for the wiring diagram go to or manual.

Jul 13, 2008 | Car Audio & Video

1 Answer

Faded print quality

If your toner saver is off and still getting faded quality means you mirrors and Scanning Lamp are not reflecting images properly.
Now if you are handy on printer then you need to take off glass
bb15714.jpg from printer then you need to clean ADF units (mirrors,lense lamp etc)
0a45468.jpg but if you unaware of printer repairing, i highly recommend to call a printer tech who ca fix back it quick.

sometime printer acts weired due to this problem while printer or make copies.

Good luck
and rate all answers.

Jun 29, 2008 | Brother HL-2040 Laser Printer

1 Answer

TV picture fades, then shuts off

There are some components in the scan amplifiers, and or the power supply area that have become unstable. This can happen with age and use. It is impossible to make an accurate assessment without actually troubleshooting the set.

You need an experienced TV service tech that is strong on troubleshooting, has the service manuals, and has the proper set-up to work on your set. I would recommend the factory service rather than an independent service tech unless you know for sure that the independent service tech can handle this type of repair.

Considering the age of the model of set that you have, I would be looking at replacing it rather than fixing it. Because of the age of the set the reliability will be decreased.

Jerry G.

Jun 10, 2008 | Samsung TXF2899 28" TV

Not finding what you are looking for?
Callaway Golf Callaway RAZR Fit Drivers Left Handed 8.5 Loft Logo

Related Topics:

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top Callaway Golf Tools & Hardware - Others Experts


Level 3 Expert

85216 Answers

Brad Brown

Level 3 Expert

18127 Answers

john h

Level 3 Expert

22486 Answers

Are you a Callaway Golf Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides