Question about Pulsar by Seiko watch PF3359Men's 100m Alarm Chronograph , , Free Sizing.

2 Answers

How do I zero-out the minute hand of the stopwatch?

The minute hand of the stopwatch does work. The problem is that it doesn't return to the 12 o'clock position when I reset the stopwatch.

Posted by on

  • Anonymous May 10, 2009

    how can i say that i.m using the stop watch or not in my watch in seiko chronograph 100m

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,338 Answers

Try this: pull out crown to the first click, then push and hold button at 2 o'clock. When the hand is adjusted to the desired time, push the crown back in.
If thi do not work, do the same using the button at 4 o'clock.

Rate me, please.

Posted on Mar 26, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Worked for me by pulling crown to second clink and using button at 2 o'clock.

Posted on Dec 11, 2009

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

David Tolond

  • 2501 Answers

SOURCE: After using stopwatch second hand

There is a method of zeroing the hands.

Rather than describing it in detail myself, you can get a full set of instructions by going to the Torgeon web site and clicking on the T16 shown at the bottom of the page, then clicking on your model.

You will then see a full description of the watch and if you scroll down to the bottom of the page you will find a link to the instruction manual. The instructions for the operation you want are a few pages in (you have to combine the crown wheel setting with the appropriate button).

Posted on May 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Swiss army 24712 after using stopwatch sec hand wont return to 12


pull crown out to second position press start till it goes to 12 then push crown back in

Jan 22, 2013 | Swiss Army Mens Victorinox Officers 1884...

1 Answer

I need the manual of breil milano shosholoza.the model is bw0480


The crown has 3 positions.

Normal screwed down.
First pull out position.
Second pull out position.

Setting the Time:
Pull out the crown to position 3.
Rotate the crown to set the exact time.
Ensure that you are in the daytime12 hour segment by allowing the hands to pass 12 o'clock and notice if the date moved on or not.
If the date changed, then you will need to advance at least 2 hours before moving on to set the date.
If you do not need to change the date, return the crown to position 1.


Setting the Date:
DO NOT DO THIS IF THE WATCH IS BETWEEN 8pm & 2am
Pull crown to position 2.
Rotate the crown clockwise to set to the correct date.
Return the crown to position 1.


Setting the Alarm [12 hour]
Pull the crown to position 2.
Rotate the crown anti clockwise to move the alarm hand to the desired time.
Return the crown to position 1.
To activate the alarm, press the 8 o'clock button. You will hear 2 beeps.
To deactivate the alarm, press the 8 o'clock button. You will hear 1 beep.
NB If the alarm is not cancelled while it sounds the first time, it will repeat again in 2 minutes time. The alarm sound last for 15 seconds. If the alarm time coincides with 1 beep of the countdown, the alarm function will be cancelled.


Battery EOL [End Of Life]
The Swiss ISA 8270 movement uses a 395 cell and will signify a low power state by advancing the small seconds hand 4 steps every 4 seconds.


Setting the Countdown
You can specify a countdown of between 1 and 10 minutes.
Press the 4 o'clock button to enter setting mode. You will hear 1 beep.
Press the 4 o'clock button to move the central timing hand successively to the desired countdown time.
Wait 3 seconds for the watch to automatically exit the setting mode.
You can change the duration of the countdown [except in the last minute] at any time.
e.g. If the countdown is set to 10minutes, and you now want to change the countdown to 9 minutes, press the 4 o'clock button. The hours/seconds counter sub-dial will perform one complete turn and then stop at 60, before continuing.


Activating the Countdown:
Press the 2 o'clock button to start the countdown. You will hear 2 beeps.
The hours/seconds counter sub-dial will perform one complete turn and then stop at 60, before continuing.
When the countdown begins, the hour/seconds counter sub-dial indicates the seconds with 1 step every 2 seconds, and the central timing hand indicates the minutes with 1 step being 2.4 seconds.


Countdown tone:
There are 2 beeps every minute.
in the last minute:
50 seconds=1 beep.
40 seconds=1 beep.
30 seconds=2 beeps.
20 seconds=2 beeps.
10 seconds and less=1 beep every second with zero being 1 second long beep. Timer function automatically starts.


Timer:
After countdown has finished the timer starts automatically.
The central timing hand indicates the minutes with 1 step every 12 seconds. The hour/minutes counter sub-dial indicates the hours up to a maximum of 96.
Press the 4 o'clock button to see the timer seconds [display lasts up to a minute].
Press the 4 o'clock button to see the timer hours.
The timer has a maximum time of 96 hours [4 days] after which the hour/seconds sub-dial counter will stay at 0 and the central timing hand will stay at 12.


Start/Stop Timer:
Press the 2 o'clock button to stop the timer. You will hear 1 beep.
Press the 2 o'clock button to resume the timer. You will hear 2 beeps.


Setting the Countdown & Timer:
Countdown reset:
Press the 2 o'clock button to stop the countdown. You will hear 1 beep.
Press the 4 o'clock button to reset.


Setting the Timer:
Press the 2 o'clock button to stop the timer. The hour/seconds counter sub-dial will show the elapsed hours and the central timing hand the elapsed minutes.
Press the 4 o'clock button to view the seconds elapsed on the hour/seconds counter sub-dial.
Press the 4 o'clock button to reset.


Resetting the Hands:
If the hands do not zero correctly, which might occur after a battery change or a violent shock, you can make adjustments by doing the following settings as long as the countdown is not in operation.
To correct the hour/seconds counter sub-dial, pull the crown out to position 2 and wait 1 second.
Press either the 2 or 4 o'clock button; the central timing hand will turn and stop [not necessarily at 12].
Press the 2 o'clock button to increment the hours/seconds counter sub-dial hand to position it at 60.
To correct the central timing hand, press the 4 o'clock button to increment the hand to the 12 position.
Return the crown to position 1.



If the battery had been replaced, the central timing hand defaults to the 10 minute position. If the battery had not been replaced, the central timing hand will return to the previously set position.

Oct 05, 2010 | Watches

1 Answer

Need manual for rolex daytona men's watch


Hello
These are the things you might need about the watch.

1. Turn the crown clockwise while it is in position 2 to manually wind the watch.It will stop if it has not been worn out or put in a watch winder for roughly two days.

2. Pull the crown out one notch to position 3 to change the time.Turn the crown clockwise to move the minute hand.

3. Push the crown back into the watch while turning it clockwise to return the crown to position 1.The crown should be tight to ensure the watch case is waterproof.

4. Operate the stopwatch and chronograph function by pressing the button located above the crown on the 3 o clock side of the watch.Stop the stopwatch by pressing the button again,Reset the stopwatch by pressing the button below the crown.
BEST OF LUCK

Jul 13, 2010 | Rolex SS/18kt Daytona

3 Answers

I have a seiko chronograph sports 150 watch; had the battery changed a few day ago and just noticed that the second hand & stopwatch hands are not 'centered'. is ther a way to reset this ? cheers


As jimmyguru said.
1. Pull the crown to the second position (all the way out)
2. Push and hold the reset button and allow the chronograph hand to rotate near the 12 o'clock position.
3. Release the reset button.
4. Repeatedly push and release the reset button to find tune the hand position until it is right at 12 o'clock.
5. Push the crown back in.

Nov 05, 2009 | Seiko SNA553 Alarm Chronograph

1 Answer

Minute Hand on Stopwatch Will Not Return to Zero


Here is the link where you can download manual for your watch:

http://www.seikousa.com/pdf/SNA_Series.pdf

The last chapter explains how to reset hands to zero.

Do not forget to rate, please.

Jan 22, 2009 | Seiko Le Grand Sport SDWF73 Wrist Watch

2 Answers

Tag Heuer Link, stopwatch seconds hand stops 2 seconds before 12


Pull crown out to position 2 [in between unscrewed (1) and pulled all the way out (3)].  Tap Button B (bottom) to reset by step back to zero.
Incidentally, Button A works Hours register in same manner for position 2.  You can similarly reset second and 1/10th with Buttons A and B, respectively, while in position 3.  Cheers! 

Jul 25, 2008 | Tag Heuer Link Automatic Chronometer...

1 Answer

Ta Heuer Professional stopwatch minute hand reser to 12 position


pull the crown on first click and push the upper button until it reaches to your desired position.

Mar 16, 2008 | Watches

3 Answers

Aquaswiss trax watch


AQUASWISS TRAX MODEL:

For clarity:
There are three adjustment knobs on the right side of the watch. Two are smaller than the main time adjustment knob. For clarification I will label:

Top knob: #1
Middle knob: #2
Bottom knob: #3

To adjust the stopwatch feature:

1. Turn #2 counter-clockwise until it pops out to its adjusting position.

2. Pull #2 towards the right until you feel the first click. (There are two click positions).

3. Simultaneously hold both #1 and #3 down until you see the 1/16 hand and the 30 minute hand rotate automatically to a fixed position.

Now you are ready to calibrate the stopwatch feature.

4. Click mulitiple times on #3 and you will see the 30 min. had move clock wise incrementally with every click. Keep clicking on #3 until the 30 min. hand reaches its apex (to its 12:00 position).

5. Now click multiple times on #1 and you will see the 1/16th hand move in very small increments clockwise. You may be bold and try to hold down #1 and let it swing as close as possible to the 12:00 position and then multiple click #1 to get it precisely to its apex.

You are almost done.

6. Now simultaneously hold #1 and #3 until you see both the 1/16th second hand and the 30 minute hands auto-rotate clockwise to their respective 12:00 positions.

Fantastic! However, now you have to return the watch back to its original locked position. This is where it could get a little tricky.

7. Make sure the time is correct. Using #2 fully extended to its 2nd click position you may adjust the time.

8. Using #2 extended to its 1st click position you may adjust the date. (Here's the trick, do not set the date for today's date. Rather, set it for the day before or in some cases, 2 days before. I will explain in a moment).

9. Now, depress #2 fully back towards the main body of the watch as best as possible and while holding down #2 turn it clockwise until it locks into position.

During this operation you may notice that the date will go forward until the watch locks into position, ergo, I had to make sure the date was for the day before...and it some cases, 2 days before.

Your watch is ready to use.

The stopwatch feature for this analog watch works very similarly to that of an actual stopwatch.

Press and hold #1 once to stop the 1/16 hand. Press and hold #3 to have both the 1/16th second hand and the 30 minute hands return to their 12:00 positions. Now you are ready to race!

Press #1 to start the stopwatch. Press #1 to stop the stopwatch. Press #3 to return the hands back to their respective positions. You may even press #3 after you press #1 to get a second reading but I will let you figure that out for yourself.

Hope this was helpful!
vsndesigns

http://www.rgmarchitect.com

Dec 20, 2007 | Tag Heuer Kirium (CL1212.BA0705)...

3 Answers

Reset Stopwatch Hands on CL1111 ?


Try setting the crown to position 2 - i.e. the position normally used to adjust the date.  Then use the top and bottom stopwatch buttons to adjust the minute hand and 1/10th hand respectively.

Oct 18, 2007 | Tag Heuer Aquaracer Quartz Chronograph...

13 Answers

Chronograph hand not resetting to 12 o'clock


for my victorinox, the crown out one position and the reset button (lower chronograph button) changes the minute hand and the top (start/stop button) does the 10th's of a second...crown all the way out and top (start/stop button) does 30 second intervals for the minute counter.

Feb 23, 2007 | Kenneth Cole KC1232 Wrist Watch

Not finding what you are looking for?
Pulsar by Seiko watch PF3359Men's 100m Alarm Chronograph , , Free Sizing. Logo

3,017 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pulsar Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

Ekse

Level 3 Expert

13434 Answers

crazydani
crazydani

Level 1 Expert

18 Answers

Are you a Pulsar Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...