Question about Copystar CS 1415 Laser Printer Toner Cartridges
Photocopying only half a copy and then blank or light copies what do i do
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: copystar 1505
j98 means there was a misfeed of the paper, you may have to have a tech look at this to figure out why its jamming, could be poor paper quality, worn feed tire and/or rollers. i would look at replacing the feed tire first that seems to be the problem most of the time...
Hope this helps...
Posted on Jun 07, 2008
SOURCE: Copy problems
1-if you make a copy on the glass instead of the feeder is it still there?
If no, then clean small 1" glass on copier there is a spot on it. even a pencil or pen dot WILL make a line on all copies. easiest way to find it, line up the paper on the small strip of glass and follow there will be something there ( sometimes it's hard to see since the background is black)
2- the drum has a black toner ring around it replace the drum blade or drum unit
Posted on Aug 07, 2008
SOURCE: black page
Main charge unit is shorting out.
Pull the main charge unit out of machine.
Take cleaner (included with toner) and clean.
--Look at front and rear for toner build -up on the charge grid.
This build -up causes a short.
After cleaning, reinstall and run.
Posted on Jan 16, 2009
SOURCE: blank copy
this problem will only occur if the main charge is not working.
it will almost certainly be the whole main charge assembly but maybe the high voltage transformer (but that would be very uncommon)
please rate if this fixes your problem
Posted on Mar 21, 2009
SOURCE: blank copy
the charge corona assy. is just the silver assembly that the corona wire is inside of. to help verify where your problem is, lift up your top lid and make a "sky" shot. watch your lamp under glass, and when lamp gets about 5-7" from left, quickly open front door. now, open the copier to inspect the bottom side of your drum. if you see a good coating of toner on drum, but not on paper, the problem is in the corona assembly thats on the bottom, middle of copier directly under your drum. if no toner on drum, then its very possible its the charge corona assy. on top of your drum.
Posted on Apr 14, 2009
Tips for a great answer:
Sep 17, 2014 | Dell Computers & Internet
Aug 18, 2014 | Sharp Office Equipment & Supplies
Oct 21, 2011 | Dell V305 All-In-One InkJet Printer
May 19, 2011 | Office Equipment & Supplies
Aug 16, 2010 | Brother IntelliFax-2820 Laser Fax
May 25, 2010 | Sharp AR-5320 Black and White Copier
Jun 10, 2009 | Canon iR 1600 Laser Photo Printer
Mar 27, 2009 | HP Photosmart C7280 Printer
76 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: