Question about DISH Network ViP722 DTV Receiver / 350-Hours Video Recorder

1 Answer

How to keep Dish Remote from truning of Dish reciever when turning off TV

I would like the Dish receiver to go into standby mode so that show still can be recorded but when I need to leave the house and turn off the TV the Dish receiver also shuts down rather than going into standby. How a I correct this issue? I am using the Dish standard universal remote with my TV programmed into that remote.

Posted by on

Ad

1 Answer

  • Official Brand Answer
  • 263 Answers

R_pettit,

I can definitely assist you with this. What button do you press when you turn off the TV? Have you tried pressing 'SAT' then the big red 'Power' button on the remote?

Tommy Faust
DISH Social Media Representative

Posted on Jul 10, 2013

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Jim Franks

  • 374 Answers

SOURCE: I need to program my new dishnet work remote

Turn the receiver off using the front panel power button and then press the channel up button and hold it until the unit powers on. This will bring you to the system info screen. There you will see the remote address the remote needs to be programmed to- usually 1. Now press and hold the SAT button on top of the remote until all buttons on the top lite up and release. Now key in the two digit number shown on the screen - numbers under ten will be preceeded buy a zero. Now press the pound sign on the bottom right of the keypad. The SAT button will flash three times and then you will need to press the record button . YOU SHOULD BE ABLE TO MANUEVER THE HIGHLIGHT ON THE SCREEN AND EXIT OUT OF THE SCREENS . Thanks for using Fix Ya. ---and if you can not bring up the system info screen perform the steps on the remote itself until you reach the correct number that will control the receiver- 01 thru 16. if you need further assistance please let me know.

Posted on Mar 30, 2009

Jim Franks

  • 374 Answers

SOURCE: I am attempting to control my Dish Network ViP 211

We can only offer codes for our remote. You will need to call Samsung at 1-800-SAMSUNG and get tthe code from them. Thanks for using Fix Ya.

Posted on Aug 16, 2009

Anonymous

  • 5 Answers

SOURCE: DISH DVR doesn't respond to remote

  1. If this is a TV2 location take the remote to the location of the DVR.
  2. Open the door on the right side of your receiver.
  3. Press SYS INFO.
  4. Press Record multiple times on your remote.
  5. Exit the screen and see if the remote works, if not replace the batteries and repeat steps 1-4
  6. If the remote still doesnt work, and this is a tv2 location (no receiver in the room with the tv) check the antenna on the back of your receiver, make sure that it is connected tightly and standing straight up.
  7. If none of this works call Dish and ask for a new remote.

Posted on Jan 31, 2010

BeckiB_DISH

Becki Barned

  • 286 Answers

SOURCE: I HAVE DISH NETWORK RECEIVER #322 AND ON TV 2 I

Hello! My name is Becki Barned, and I am from Dish Network customer service. The problem that you are having is simple to fix. Although your remote works for the volume, and power, it is not working for the satellite. It does need to be reprogrammed. Just take it to tv1. With your tv1 remote, press the menu button twice. Then with the tv2 non-working remote, hold down the SAT button until all the mode lights light up at the top, then release. Then press the #9 on the remote keypad, then the pound (#) button, then record (above the number 3 on the keypad) 3 times. This should resolve your issue!!! If not, you can blog back, or find us on Twitter!!!!

Posted on Dec 24, 2010

raycalo

Ray Calo

  • 358 Answers

SOURCE: Dish Network "No Signal" Message on Screen..Standby Mode

austinbrooke,

I saw your post and I'm wondering if you are still having problems getting a picture on your TV. Is it TV 1 or TV 2? What type TV is connected? If it's a HD TV, you will need to go through your input or source list on the TV to find your picture on TV 1. TV 2 is generally on either channel 60 or 73. I hope this helps.

Ray Calo
DISH Network

Posted on Jan 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reciver box keeps turing its self off after 3 hour


Hi, I would be happy to assist you with your issue. DISH receivers are equipped with an "Inactivity Standby" feature which will place the receiver in a standby mode if the remote is not used in specified amount of time. The reciever does allow you to set the amount of time or if you would like, you can diaable the feature. This can be accessed by pressing the Menu button on the DISH remote and then select "Preferences" and then "Updates". If you are still having issues and need additional assistance, please feel free to PM DISH directly on facebook here: http://goo.gl/dgbNL Thank you!

Mary Catherine Brady
Team Lead- Social Media
DISH, L.L.C.
Sunday-Wednesday 2:45pm-11:15pm, Thursday 1:30pm-10:00pm (MST)

Dec 25, 2013 | DISH Network Televison & Video

Tip

DISH Solo DVR VIP612 Limited Mode What is DISH Solo DVR VIP 612 Limited Mode?...


DISH Solo DVR VIP612 Limited Mode

7c06801.jpg

What is DISH Solo DVR VIP 612 Limited Mode?

You can program your remote control in Limited Mode to keep from accidentally changing the channel on your TV or VCR and causing a snowy or blue screen.

  • When the remote control is in Limited Mode for TV mode, you will only be able to use POWER, MUTE, and VOLUME functions for your TV.
  • When the remote control is in Limited Mode for VCR mode, you will only be able to use POWER and the VCR functions for your VCR.
Note: Limited Mode is not used with amplifiers (AUX mode).

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

on Jul 05, 2010 | Televison & Video

Tip

DISH Solo DVR VIP612 Limited Mode What is DISH Solo DVR VIP 612 Limited Mode?...


DISH Solo DVR VIP612 Limited Mode

7c06801.jpg

What is DISH Solo DVR VIP 612 Limited Mode?

You can program your remote control in Limited Mode to keep from accidentally changing the channel on your TV or VCR and causing a snowy or blue screen.

  • When the remote control is in Limited Mode for TV mode, you will only be able to use POWER, MUTE, and VOLUME functions for your TV.
  • When the remote control is in Limited Mode for VCR mode, you will only be able to use POWER and the VCR functions for your VCR.
Note: Limited Mode is not used with amplifiers (AUX mode).

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

on Jul 05, 2010 | DISH Network ViP 612

1 Answer

Turn of the sleep mode on my Hopper


Hi there joe ibrahim, my name is Kimberly and I form part of the Social Media department with DISH. In order to disable the Inactivity Standby mode on the Hopper and Joey system, press 'Menu' on the remote, select 'Settings', then 'Diagnostics' and last, 'Updates'. From the Update Screen select Disable and be sure to select 'Save'. If you have additional questions feel free to reach me at: kimberly.escobar@dish.com

Kimberly Escobar
Social Media Representative
DISH L.L.C

Aug 17, 2013 | DISH Network ViP722 DTV Receiver /...

2 Answers

Hopper & Joey


Hi there joe ibrahim, my name is Kimberly and I form part of the Social Media Department with DISH. In order to disable the Inactivity Standby on your receiver you will need to press Menu on your remote, select Diagnostics, and then Updates. In the Updates screen select Disable and then Save. This will resolve the issue. Feel free to reach me at: kimberly.escobar@dish.com with any questions.

Kimberly Escobar
Social Media Representative
DISH L.L.C

Aug 17, 2013 | DISH Network ViP722 DTV Receiver /...

1 Answer

How do i change tv 2 with reciever or remote 1, lost remote 2.


Hi this isMike Houston of DISH Network and I see you have lost your TV2 remote. Until youget your 2nd remote you can put the receiver in Single Mode and putTV1 on the channel you want to watch for TV2 and then put it back in Dual Mode.I can help you in getting your TV2 remote so you can watch TV on both setswithout having to change the Mode setting on TV1, I will send you my e-mail andyou can contact me through there; michael.houston@dishnetwork.com.

Aug 08, 2011 | DISH Network DVR-625 DTV Receiver /...

2 Answers

How do i tune tv #2 from the reciever or the 1st remote? dish network dual reciever, silver remotes.


I'm not sure I understand your question. If you are trying to use a second TV without a remote or if you are trying to set up TV 2. The two remotes are different so, they will not perform on both Tv's. Please gine me more info on what you are trying to do.
Thanks,
Dave

Aug 08, 2011 | DISH Network DVR-625 DTV Receiver /...

2 Answers

We have 2 led/lcd vizio tv's. (TV1) is a 47"


first off, check the mode setting at tv 1, are you in dual mode, or single. you need to be in dual. Also sounds like the remotes address is not correct. rather then me typeing forever here, I would call dish, 1-800-894-9131, they can walk you rite through it.

Mar 20, 2011 | DISH Network ViP722 DTV Receiver /...

1 Answer

Remote will not work for t.v or dish reciever but batteries are good, lights still work but will not turn tv on or off or turn reciever on or off or even get a guide menu. please help


albertmjuras

Is this a new remote or the existing one? I have provided instructions on how to program the remote to your TV and to readdress the remote to your receiver. Select the model of the receiver you have, click on the link and the just follow the directions. The bottom portion of the page has links for TV codes to program the remote to your TV. If this doesn't work, you may need a new remote. I hope this helps.

Program remote to TV and receiver:
http://www.dishnetwork.com/SupportSection/remote-setup

Ray Calo
DISH Network

Mar 01, 2011 | DISH Network IR Remote Control

2 Answers

TV on Standby


There is a Sony S3000 protect blinks table:ebf219b.gif

May 27, 2010 | Sony KDL-32S3000 32 in. LCD Television

Not finding what you are looking for?
DISH Network ViP722 DTV Receiver / 350-Hours Video Recorder Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76171 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...