Question about Krups Small Appliances Espresso Machine

1 Answer

Need Manual for Krups coffeemaker AG E 15 - can't set time

After a powerfailure, my Krups coffeemaker has a flashing display of 8888. I can set the alarm time (I think) after much trial and error, but I can't set the current time. If I had the manual, I might be able to solve this myself?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I went to the Krups web site and pulled a copy of the manual for a different model with the same user interface. This solution worked fine. My model (on the baseplate) is AG E 15. The manual that I printed was for a FMF5. Cheers!

Posted on Apr 01, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Krups coffee exresso/coffee maker


Check fuse/breaker for that outlet. Try another outlet....

May 11, 2013 | Krups XP2070 Programmable 10-Cup...

1 Answer

How do you set the time as well as the timer? I have looked but can not find the manual.


Good Afternoon,

Programming Your Coffee Machine

• Plug in your appliance: the display will light up briefly in blue, blink "8888" and then remain

fixed.

• Press the O/I button if you wish to make coffee without using the programmable mode.

• The display will light up in blue and alternately show "ON" and the current time.

• Press the O/I button to shut off the coffee machine. The display will no longer be lit.

Setting and Adjusting the Clock

• The machine must be "off".

• Press and hold the prog button (o) for 3 seconds: the hours will blink "88 _ _".

• Adjust the hours in steps by pressing the h/min button (n).

• Press the prog button : the minutes will blink" XX 88".

• Adjust the minutes in steps by pressing the h/min button.

• Confirm the setting by pressing the prog button.

Setting Auto On

This programs the coffee machine to start automatically at the set time each day.

• Press the prog button (o) briefly : the display will blink "prog" for about 1 second, followed

by "8888".

• Press the prog button briefly: the hours will blink "88 _ _".

• Adjust the hours in steps by pressing the h/min button (n).

• Press the prog button briefly: the minutes will blink "XX 88".

• Adjust the minutes in steps by pressing the h/min button .

• Confirm the setting by pressing the prog button briefly:

• The display (q) will show the time and a " ".
• Press the h/min button to cancel the programming.

Click the link below for the maunal:

http://www.krupsusa.com/NR/rdonlyres/A50B1840-2CD9-44C1-87E8-260B92D96D3A/7244/FME124_FMF345_usa.pdf

Hope this helps!

zeppelinx12

Feb 23, 2011 | Krups FME2 Coffee Maker

1 Answer

I lost my manual on how to use the self cleaning on my cuisinart coffee machine


Decalcification
Decalcification refers to the removal of calcium
deposits which form over time on the metal
parts of the coffeemaker.
For best performance from your Brew Central
Thermal™ Coffeemaker, decalcify the base unit
from time to time. The frequency depends upon
the hardness of your tap water and how often
you use the coffeemaker. The flashing Clean
light will indicate when you should clean your
coffeemaker.
If the Clean light begins to flash when the
coffeemaker is turned on, it is telling you that
the calcium buildup is interfering with the
functioning of your coffeemaker and the flavor
of your coffee. To clean, fill the water reservoir to
capacity with a mixture of ¹⁄³ white vinegar and
²⁄³ water. Press the Clean button. When the self
clean light glows, turn the coffeemaker on by
pressing the on/off button. The Clean light will
shine steadily. The coffeemaker is now in Clean
mode. One cycle should be sufficient to
adequately clean the coffeemaker. When the
cycle is completed and the five beeps sound,
the coffeemaker will shut off. Turn the
coffeemaker ON to see if the Clean light
continues to flash. If it does, turn it to OFF and
then repeat the cleaning procedure with a fresh
solution of vinegar and water.
If the Clean light no longer flashes, turn the
coffeemaker to OFF and then run one cycle of
fresh cold water through the unit before using
the unit again to brew coffee.
Notes on the Clean F unction
Pressing the Clean button cancels all other
settings. If it is pressed accidentally, press it
again to return the coffeemaker to all its
previous settings. Pressing ON/OFF will also exit
the Clean Mode and turn the coffeemaker OFF.
Directly from the DCC-2400STR manual

Feb 14, 2010 | Cuisinart Coffee Makers & Espresso...

1 Answer

My Krups combo espresso/ coffee maker xp2070 will not turn on at all. No blue light when hit either start/stop button.


Do you have power to the control module? Can you set the time or is the display completely dead? Mine was completely dead and I replaced the power module and the display/control module.

Sep 13, 2009 | Krups XP2070 10 cup Coffee Maker/15 bar...

1 Answer

Flashing 8888 will not make coffee


I had a similar problem. It stopped working mid-brew, then flashed 8888 incessantly and I couldn't get anything to respond. I unplugged, turned it upside down overnight to drain. Next day it worked fine and has been OK since.

Aug 08, 2009 | Krups FME2 Coffee Maker

1 Answer

Lost manual


The manual is here: http://www.wholelattelove.com/manuals/Krups/FMF5%20Manual.pdf

Here is the relevant information from it:
Setting Auto On 
This programs the coffee machine to start automatically at the set time each day. 
• Press the prog button (o) briefly : the display will blink “prog“ for about 1 second, followed 
by “8888“. 
• Press the prog button  briefly: the hours will blink “88 _ _“. 
• Adjust the hours in steps by pressing the h/min button (n). 
• Press the prog button briefly: the minutes will blink “XX 88“. 
• Adjust the minutes in steps by pressing the h/min button . 
• Confirm the setting by pressing the prog button briefly: 
• The display (q) will show the time and a “ “. 
• Press the h/min button to cancel the programming. 

Aug 19, 2008 | Krups FMF5-14 Stainless Steel 10-Cup...

3 Answers

Black and decker coffee maker


what type of coffee maker? does it have a model number?

Dec 11, 2007 | Coffee Makers & Espresso Machines

Not finding what you are looking for?
Krups Small Appliances Espresso Machine Logo

766 people viewed this question

Ask a Question

Usually answered in minutes!

Top Krups Coffee Makers & Espresso Machines Experts

Pierre Laplante

Level 3 Expert

2042 Answers

Charles Tidwell

Level 3 Expert

475 Answers

Ray Murphy

Level 2 Expert

68 Answers

Are you a Krups Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...