Question about Cisco Catalyst 3560-24PS Switch
Hello there, I bought a used 3500XL cisco switch. have it hook up on the network, and able to connect to the switch thru hyper terminal. The pervious owner did not reset the switch to factory default. I look up some documents online and have tried the these command( erase startup-conf or write erase) to reset it to the factory defualt, but failed. can someone please? Thanks, Jade
When you say you were able to connect to the switch through hyperterm, were you able to login with the enable password? If not, you cannot reset the factory defaults without the enable password. If you do not have this then search on Cisco's site for password recovery for your model switch. If you did login with the enable password, the command to run for CATos is "clear config all". For Cisco IOS, you have the right command with "write erase". When you issue that command, do you get a "Erase of nvram: complete " or an error? Are you issuing the "reload" command after a successful erase? Be sure you answer No when it asks "System configuration has been modified. Save? [yes/no]:" as sometimes this seems misleading and some people think they mean to save the reloaded default. They are really warning you that you are about to loose the old configuration and attempting to prevent you from accidently erasing it. So answer "no". After a successful reload of the IOS you should also clear any VLAN information. To do this, issue "delete flash:vlan.dat" and then do another "reload".
Posted on Aug 29, 2007
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 30, 2016 | Cisco Computers & Internet
Sep 02, 2014 | Linksys By Cisco E2500 DualBand WirelessN...
May 07, 2014 | Linksys Cisco Aironet 1200 Wireless Access...
Aug 08, 2013 | Linksys By Cisco E2500 DualBand WirelessN...
Oct 27, 2012 | Cisco SG200-26 24 10/100/1000 Ports,...
Aug 28, 2012 | Cisco 7945G IP Phone
Jan 28, 2011 | Cisco (AIR-BR1310G-A-K9) 802.11g/b
Oct 28, 2010 | Cisco 7910 IP Phone
Oct 23, 2009 | Cisco Catalyst 2924C-XL...
17,234 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: