Question about Emerson LC320EM8 32 in. LCD TV

2 Answers

My flatscreen emerson tv will not turn back on.

The tv was working fine when i last shut it off but will not turn back on. the standbye light is on and when i hit power the light flashes green a few times then just goes back to red.

Posted by on

  • 1 more comment 
  • mouse752000 Mar 31, 2009

    it actually turned of while I was watching it and now won't turn back on wouldn't you know my warranty expired by 2 months figures

  • Anonymous May 11, 2010

    Does your TV little green light blinking and say "DIGITAL TELEVISION" for about 2 seconds then shut off?
    Is it under warranty?

  • Michael Rhizo May 18, 2013

    Mr Sacco that is what is happening to mine, any clue?

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I found a way around this problem. When this happens, don't use the remote.

Walk up to the TV, then HOLD DOWN the power button and while the lights are flashing, start pushing the menu button on the TV at the SAME TIME.

Then your screen will turn on. No idea why this works. Just stumbled on it while getting ********** that this TV, I had less than a month, suddely would not come on anymore. I was about to unplug the whole thing to take back to WalMart and just started pushing button combinations and found this worked.

Posted on Dec 26, 2010

  • 3 more comments 
  • kogrady10101
    kogrady10101 Jun 09, 2012

    It just worked for me too...thanks!!!

  • kogrady10101
    kogrady10101 Jun 09, 2012

    It just worked for me too...thanks!!!!!!

  • Eric Post
    Eric Post Mar 20, 2017

    Well I'll be damned! It worked! It's just too bad that the screen is shattered lol

  • Eric Post
    Eric Post Mar 20, 2017

    Well I'll be damned! It worked! It's just too bad that the screen is shattered lol

  • TamaraAnn
    TamaraAnn Apr 04, 2019

    It worked on mine too! Took a couple of tries, but keep at it!

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

My TV will not turn on. The red light doesn't even blinlk

Posted on May 08, 2017

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony kdf-46e3000 turns on stays on for a few minutes shuts off green power light flashes then goes to red flashing lamp light hit the power button again process starts all over. Picture looks great for the...


It is the lamp that is reached at end of life span.
Replace lamp in tv if it has not been replaced in last 2-3 years.
Lamp replacement procedure is easy and written in user manual.

Aug 14, 2010 | Sony KDF46E3000 46" Television

2 Answers

I have a 56' that wont show picture


Power board is bad.. I had the same issue.

Apr 13, 2010 | Samsung HL-S5679W 56" HDTV

2 Answers

Sylvania LD320SSX turns off by itself.


your powersupply is dying in the set.. have it checked..

Apr 10, 2010 | Sylvania LD320SSX LCD TV

1 Answer

I have a 56" samsung rear projection tv that won't turn on. the red standby light is lit and when i push the power i hear two clicks and the green timer light flashes quickly then the green led stays lit...


I suspect you probably have a bad LED assembly. It could be either the red, green or blue that is bad and give you the same symptom. The problem is locating parts for it as it looks like the light engine is no longer available. I would have a technician look at the TV to verify this and what parts are needed for repair.

Nov 03, 2009 | Samsung HL-S5679W 56" HDTV

2 Answers

Stays in standbye and will only flash green (power on) twice before staying in standbye


The 6 inverter transformers on the bottom of the picture is the problem and what need to be tested.
Unplug the 6 wires that goes to the LCD screen. Use a multimeter to test for resistance from each output plug on the board. The one without the resistance is the bad one.
If this doesn't locate the bad one this way, Each plug should give out DC voltage if working properly. Test each plug for voltage.
The TV will automatically turn off in a couple of seconds like before. You'll have to keep pushing the power button to test each output plug for voltage.

Soon as you find the bad Inverter Transformer, just solder in a new one and the TV should work fine after that.
The part # for the Inverter Transformer is LTZ2PC0MS008.
Here's two places to get them:
http://www.partstore.com/Part/Funai%20Corporation%20Inc/Funai/LTZ2PC0MS008.aspx

http://www.encompassparts.com/products/?LTZ2PC0MS008

Apr 23, 2009 | Televison & Video

1 Answer

Philips 42PF9956/37 Plasma TV - Looking for y sustain board


it isnt the Y-SUS board, it is the Power supply, iv fixed this exact problem twice in the last month, try turning the tv on, and when it turns green, unplug it real fast, while light is still green, after 15 seconds plug it back in, then hit the power button, if it dont come on, hit the power button again, this time, as soon as it turns off, hit the power button again to turn back on, sometimes you can trick the tv and it will turn on, at least i was able to do it, and once it comes on, it should work fine, untill you turn it off again.

Jan 10, 2009 | Philips 42PF9431D/37 TV

4 Answers

Green flashes then tv turns off


or a new lamp. you could first replace the lamp.
the screen might work fine for a couple of seconds, but then it fades away or deteriorates. This means the lamp is going bad.

Aug 23, 2008 | Sony KP-51HW40 51" Rear Projection...

4 Answers

Tv cuts off and green light flashes


Yup, it seems a lamp problem can give a blinking green light over the 10 times (1 - 10 times for diagnostic codes), but in my case rather than replace the bulb if it works for a minute then resets with the green light blinking, do what I did.
Take the lamp out and inspect it, it has breather screens top and bottom, if it cant breath because there clogged with dust, clean them, and you can remove the screens, use q-tips and clean the inside. I saved the cost of a lamp and it's working fine!

Jun 27, 2008 | Sony Grand WEGA KDF-55XS955 55" Rear...

2 Answers

LC 32D43U power and OPC green light flashing set does not come on


hey i have had the same problem but i unplugged the tv for awhile about a half hour and then plug your tv into a different wall outlet if you can and should work. It worked for me, i had it plugged into a surge protector then i unplugged it from there, let it sit of half hour then plugged into different wall outlet and worked. so try that and see if it works.

Dec 29, 2007 | Televison & Video

Not finding what you are looking for?
Emerson LC320EM8 32 in. LCD TV Logo

16,167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...