Question about Uniden Cordless Phone
Ok. My problem was that the main phone and answering machine worked fine, but the second handset kept saying, "Out of range" no matter what I did. If I tried to make a call, it would say, "Connecting...", but after a while, "Out of range".
I followed the manual which offers two mechanisms to deregister the phone. The first method (press Menu soft key...) went through the motions and then said, "Out of range"!
The second method in the manual worked - after I worked out what the instructions mean!
So here's the answer:
Take the phone out of the cradle (charger). Press and hold simultaneously for more than 5 seconds the red telephone-symbol key and the # key.
You will hear a confirmation tone and DEREGISTRATION COMPLETE appears.
Now go to the OTHER phone (the MAIN phone). Take it out of its cradle and put the deregistered second handset in the MAIN cradle. The window displays a few messages and then REGISTRATION COMPLETE.
After that, for me, everything worked.
(Put each phone back in its normal cradle.)
Posted on Feb 10, 2009
Ok I TOO have suffered from the "Out of range" problem with the Uniden 5.8 Ghz cordless phone (with 3 bases). The "Out of Range" appears on all 3 phones. The phones are not Out of range, this problem has occurred one other time. Thank heaven for other people posting their problems (Dr Tech :)) Although there are some posts that state unplugging the battery and/or the power cord works, it did not for me. Here's what DID work.
First: Deregister the phone. Hold the red end button down and the # button at the same time for about 5-8 seconds or until it beeps and says
Posted on Sep 04, 2010
(remove cover, unplug battery, while holding down * & # keys, plug in battery, then let keys go. Now press top right 3rd soft key below LCD display and reset eeprom. Place in base and re-register. If you get 'Registration Failed' then press End & # together until it says 'Registered'. Otherwise, you may have to get it repaired/replaced according to Uniden).
Posted on Feb 16, 2009
My phone was brand new out of the box and had the "out of range" error on both handsets. I read thru these suggestions and began by choosing "System Reset" as instructed. This did not work on its own so I tried to "deregister" the handsets. This didn't work either!!!
Out of frustration I took the batteries out of the handsets and once I replaced the batteries and put the handset back in the cradle, everything reset itself and they are all working fine now.
Posted on May 03, 2008
You should do the Deregistration and then do the Registration again
Posted on Jun 15, 2008
You have to put the both unit on the BASE for 10 sec. to sync.
Posted on Sep 01, 2007
We had 1 phone of the 2 which said "out of range".After trying everything, including registration etc, we pulled the battery out of the back of the phone, disconnected the leads. Gave it a clean, then replaced it. Now the phone works normally.
Posted on Feb 22, 2009
Solution #4 above works!!! Take the battery of the handset out, wait for a while, then plug the battery back in. Works like a charm!!
Posted on Mar 09, 2010
I called the Uniden support, and although it took awhile, the customer service representative was able to get all three of my phone sets registering again with the base.
Posted on Apr 15, 2008
Unplug phone,take out battery,plug in phone,place battery back in,fixed...
Posted on Oct 02, 2012
I changed the battery from headset one with headset 2 and problem solved. Before I changed that battery, I left the one that said out of range to sit for about 5 minutes before I plugged in other battery
Posted on Feb 02, 2012
Unplug the phones from the jack, and remove the batteries and power cord, wait 2 minutes, see if that helps.that is what i did the first time and it worked but i dont thing it will work the next.
Posted on Dec 30, 2010
Go to Menu then select System Reset, then selct Replacing base, then answer Yes. This will advise you to place in base to register and it will do so in about 5 seconds.
Posted on Sep 20, 2007
I had 'Out of Range' issues for my second Uniden WDECT 3355 +2 handset. Every time I hit the 'talk' button, it would display 'Out of Range' on the screen. Here's what I did (in order):
If you require a user manual for the UNIDEN WDECT 3355 +2, you can view and download it here:
Posted on Apr 18, 2013
Press the Hand Set (HS) button on the main base which causes your phone to beep loudly. Then pick up the phone, press "Talk" to stop the beeping and you're all set again. This will get rid of the "Out of Range" and "Searching" mode and you will be able to use your phone again.
Posted on Nov 20, 2012
My phone was doing same thing (out of range) I'm beating my brains out. Some of my outlets are on swithes and my wife had turned a switch off .of coarse she was the first one to notice phone not working. All works well at least that was my problem I' m glad it was a easy fix .
Posted on Jun 19, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 30, 2013 | Uniden DECT 6.0 Cordless Phone
Mar 30, 2011 | Uniden EXP4540 2.4 GHz Cordless Phone
Aug 14, 2010 | Uniden Lands Phones
May 25, 2010 | Uniden TRU9585 Cordless Phone
Jul 21, 2009 | Uniden Cordless Phone
Apr 16, 2009 | Uniden 5.8GHz Expandable Cordless Phone...
Mar 08, 2009 | Uniden TRU8885-2 Cordless Phone
Nov 27, 2008 | Uniden 2.4 GHz Expandable Phone System...
Nov 20, 2007 | Uniden TRU9380-2 Twin Phone
Oct 14, 2016 | Uniden Cordless Phone
39,677 people viewed this question
Usually answered in minutes!