Question about Fuji FinePix 2600 Zoom Digital Camera

1 Answer

I didn't open all the way the sliding cover door to my camera and the lens got stuck. I was able to unstick it but now I am having trouble with the camera stating low batteries and shuts off. I bought new rechargeable batteries but it still does not work. I thought it might be the card that fits in the slot so I took it out and put it back in and the camera worked for a couple minutes but then stopped working again.

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Fuji Master
  • 6,215 Answers

The internal gears have been damaged - repair or replace

Posted on Jul 18, 2017

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: NEW Batts but keep getting low batt indicator and....

Sorry, no solution. Same problem here. I am very unhappy because initially it took great pictures. The first one I tried only worked a couple of days and I returned to store and they replaced. Second worked a couple of months and now immediately draws down power and won't work on new batteries. I was told to use NH-10 batteries (rechargeable). I did this from the beginning. Still won't hold charge.

Posted on Feb 13, 2007

t00nz

CameraR

  • 4738 Answers

SOURCE: Lens cover sticks closed.

If you're careful this problem is a relatively easy fix for many digital cameras. The design of the lens cover mechanism is usually simple and very similar throughout camera brands. Here's an example fix for a Canon A400 with similar problems:

http://camerarepair.blogspot.com/2007/11/repair-of-stuck-lens-covers.html

Posted on Nov 10, 2007

t00nz

CameraR

  • 4738 Answers

SOURCE: lens stuck open

The following blog outlines some repair options for a lens error:
http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Posted on Dec 27, 2007

david

  • 244 Answers

SOURCE: Are there any guides for disassembly for this

Yes. You will find a post dealing with focus/zoom error on my tips page which should give you help in opening up this camera.
You will also find my email address if you want some pictures emailed to you.
Good luck

Posted on Jan 19, 2010

Eugen Mihai

  • 51 Answers

SOURCE: camera won't turn on. It just makes clicking noise.

After i replace standard alkalines with rechargeable NiMH batteries Sony 2700 Ni-MH or Varta 2700 Ni-MH it's was working!
My camera it's working now!
1570356.jpg

Posted on Jul 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lens protective cover won't close after I dropped it.


A stuck lens cover is a fairly common problem, but it is normally easy to fix. A single grain of sand jamming the cover mechanism is normally the culprit, and you want to try to dislodge it: 1) Try blowing lots of compressed air around the lens cover to clean the mechanism. Or use a hair dryer for a few seconds (don't want to heat up the camera). Use no heat mode if possible. 2) Slide a thin strip of paper between the lens cover shutters and the outer support ring. Work it around 360 degres to clear out any debris that may be in there. 3) With the lens barrel extended and pointed downward, tap the lens barrel with a pencil while you extend and retract the lens by powering the camera on and off. Repeat the above three steps several times. If repeated tries don't work (keeping in mind that it usually does), it then may be necessary to open the lens barrel to access the lens cover mechanism.

You can open the lens barrel up to fiix the covers, but only as a very last resort. The above procedures normally work if you try them enough. But for those particularly nasty stuck mechanisms, here's an example repair on a Canon Powershot A400 (do this at your own risk, and it will void your warranty):

http://camerarepair.blogspot.com/2007/11/repair-of-stuck-lens-covers.html

Jun 30, 2009 | Canon PowerShot S410 / IXUS 430 Digital...

2 Answers

Lens error


I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc"  uploaded on site http://www.esnips.com/web/papputatiyasStuff    It will be helpfull for you. Its is a step by step solution with images.
Regards Mukesh

Jan 03, 2009 | Cameras

1 Answer

Turns off due to sliding lens cover


may need to replace the screws in the door or even tighten them up

Dec 30, 2008 | Olympus Camedia Stylus 300 Digital Camera

1 Answer

Lens cover does not operate correctly


I fixed this problem on my Fuji FinePix A303 (though it took some hard work).

The problem:
Camera Lens Cover stuck open or stuck closed.
Power on, and get !LENS COVER error.
Lens fails to extend.

The solution:
Short answer: The motor driving the lens cover is weak and eventually breaks down. I manually open the cover now. This took a manual modification to the camera (and some work).

1. Take the camera apart. See here for details, and be careful around the flash, as you'll get a nasty shock otherwise! http://www.mathematik.uni-marburg.de/~haim/focuserr.htm
2. Once you can see this, you're just about there:
moz-screenshot-10.jpg17064a3.jpg
3. Take off the battery cover (in the picture above).
4. Wrap a wire around the sliding pin for the lens cover, and drill 2 small holes through the black structure underneath the battery case, and then to the outside. The wire goes from the pin to the outside via the two holes. You should be able to manually open and close the camera cover COMPLETELY now with the wire.
5. Reassemble the camera (actually, you can test that it's working when it's all apart, if you're careful).
6. To operate the camera now, close the shutter first while off. Power on the camera, and very soon after open the shutter all the way by pulling on the wire (from step 4). This basically mimics the action of the little lens cover motor. If you timed it right (you have about a second margin), the lens should extend and everything functions perfectly.

It would have been nice to have been able to simply buy a new motor, but that would probably be a pain and cost some money.

Hope this helps!

Matt Van Dyken.
http://mattvd.googlepages.com
moz-screenshot-8.jpgmoz-screenshot-9.jpg

Aug 16, 2008 | Cameras

1 Answer

Canon sliding lens cover door


I have been having the same problem. Once opened, the sliding door will not close and the lens won't retract. But I have found that if you plug the camera into a computer via a USB, the lens then retracts enabling you to close the lens cover.
I'm still trying to find a way to fix this problem, since this is a great camers and still takes fantastic pictures.

Apr 21, 2008 | Canon PowerShot S50 Digital Camera

2 Answers

Lens cover slide stuck closed


Take a butter knife and slide it where the crease is. move the close/open button till it open it could just be stuck due to moisture. Hope this helps.

Mar 09, 2008 | Canon PowerShot S70 Digital Camera

1 Answer

Les extended, screen remains black


tuen on camera then press display a few times. it sounds like the display is just turned off. the lens system should be open.

Jan 03, 2008 | Pentax Optio S50 Digital Camera

4 Answers

Lens will not retract


In my case, there was dust in the switches that sense the cover movement.
  1. Close the sliding door and wait until the lens is drown inside (timeout).
  2. Open the screws that secure the front cover.
  3. Remove the sliding door covering the lens. There is no trick (hidden screws etc) so just use the force. The door is mounted by two-sided tape and adhesive.
  4. Remove the front cover. This is also mounted by two-sided tape / adhesive in the center, so you have to be a bit brave.
  5. The sliding door rails and the movement sensors are now visible. Clean all dirt.
  6. Try the door functionality.
  7. Mount the front cover after the lens works as it should. Close the screws.
  8. Mount the sliding door.

May 27, 2006 | Konica Minolta DiMAGE G400 Digital Camera

2 Answers

The slide doesnt open


Contact this site as theres as well a toll free Tele # Good Luck http://www.nikoncamerarepair.com/

Apr 09, 2006 | Konica Minolta DiMAGE G400 Digital Camera

1 Answer

Slider Prob


Dang, what a weird design. The lens needs to go threw a cycle before it can reach the idle position where it waits for a comand from the user. If its in the closed position and you turn it on it extends to its full range then stops at the idle position. It sounds like it is stuck in some spot between close and idle. Since it cant reach the closed position or idle its shutting down. The only way to get it to work is to try and free the lens so it can cycle threw. There must be a lip on the slider and the lens is stuck on this lip so you cant slide it. Remove the batteries then try and slide the door open try and slide somthing between the lens and the door to free it up. This is the only way to get it threw the cycle. It may need to be serviced It sounds like the switch for the slider door is warn or has broken. It may work again if you can free the lens.

Aug 31, 2005 | Canon PowerShot S30 Digital Camera

Not finding what you are looking for?
Fuji FinePix 2600 Zoom Digital Camera Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

Ekse

Level 3 Expert

13434 Answers

Azam Ali

Level 1 Expert

31 Answers

Parshiv Luthra

Level 3 Expert

395 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...