Question about AT&T Speakerphone CL81219
Handset was purchase used and I want to reset the phone so that I can connect it to the new base that I own. Phone continues to read, "connecting" to which I presume it is still trying to connect to the old base unit from the previous owner. I want it to connect to a new base unit. Do you know of a what to reset the phone handset so that it will ready 'not registered'. An additional complication is that the new-used handset I bought is a different but very similar model number. (if that makes a difference). used handset is cl82209 and my existing phones are cl81219.
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Hi yes you can add additional phones to it as long as their the same frequency so that they pick up the signal from the main phone that plugs into the phone line.
Im sure you can have upto 4 handsets but just make sure theis same make and frequency
Posted on Jan 29, 2008
SOURCE: I had to purchase a
According to the manual starting on page 52, you need to de-register all handsets then re-register the handsets one at a time. The manual covers both cordless model numbers so the handsets should be interchangeable. I have included a link where you can download the manual if you need it.
Posted on Mar 27, 2011
Tips for a great answer:
Aug 04, 2008 | GE 27992GE5 Cordless Phone
Jan 01, 2008 | EnGenius SN 920 Ultra Cordless Phone
You may need to reset your handset in the following instances:
You lose a handset and purchase a new one. When you try and register to your existing base you get registration
You are unable to register any handsets to the base.
You had a base which needed to be exchanged by the manufacturer. When you register your existing handsets
to the base, the handsets say #3 and #4, but you only have 2 handsets.
When you are instructed to by the one of the manufacturer's call center representatives.
To reset, do the following:
Press and hold [ ] and [#] for more than 5 seconds. Select DEREGISTER HS.
WHICH HANDSET? appears. Select the handset that you want to de-register, and press the OK soft key.
DEREGISTER HS appears. Select YES, and press the OK soft key.
ARE YOU SURE? appears. Select YES, and press the OK soft key. You will hear a confirmation tone. The
handset will clear its registration information from the base, and then delete its own base information.
MODELS VARY! PLACE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER'S MANUAL. To
re-register the handset to the base (see page 25).
If the handset cannot contact the base, it will display OUT OF RANGE. Make sure the handset is in range of the
base and the base is connected to power.
Note: It is also possible to reset the handset back to its original factory settings. All changes including Caller ID information
will be erased. For more information on resetting the handset back to factory settings and when you need to
do this, see www.uniden.com or call our Customer Service Hotline. See back cover page for contact information.
Resetting the Handset without the Base
If your original base is not available for some reason (for example, it is lost or somehow incapacitated), you can still
reset the handset and use it with another base.
Press and hold [ ] and [#] for more than 5 seconds.
Move the cursor to select BASE UNAVAILABLE and then press the OK soft key.
BASE UNAVAILABLE appears.
Move the cursor to select YES, and then press the OK soft key. ARE YOU SURE?
Move the cursor to select YES, and then press the OK soft key. You will hear a confirmation tone. The handset
will delete its own base information without trying to contact the base. When the base information is deleted,
the handset displays MODELS VARY! PLACE HANDSET ON THE BASE FOR REGISTRATION OR REFER
TO OWNER'S MANUAL. Register the handset to the new base (see page 25). of its user manaul.
Sep 12, 2011 | Uniden TRU9485 Cordless Phone
Feb 06, 2011 | Panasonic KX-TG1033S Cordless Phone
Mar 17, 2017 | Vtech VT 40-2420 Cordless Expansion...
Jan 29, 2008 | Sony SPP-A2780 Cordless Phone System
Jul 19, 2007 | Siemens Gigaset 4210 Cordless Phone
Jul 08, 2007 | Vtech Cordless Phone Battery for 2429,...
45 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: